Skip to main content
Transcend PCMCIA Ata Adapter for Cf 2 Card
Transcend

Transcend PCMCIA Ata Adapter for Cf 2 Card

Bottom line: The Transcend PCMCIA Ata Adapter for Cf 2 Card ($16.69 on Amazon as of 2026-11-20 23:18 UTC): Converts 50-pin CF to 68-pin PCMCIA in one passive adapter; main trade-off: type I CompactFlash only, so thicker Type II cards are excluded.

$16.69 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Converts 50-pin CF to 68-pin PCMCIA in one passive adapter
  • ✓ Driver-free on Windows 7/8/10, Mac OS X 10.0+, Linux 2.6.30+
  • ✓ Full PC card ATA read/write speed, not USB-throttled

Cons

  • ✗ Type I CompactFlash only, so thicker Type II cards are excluded
  • ✗ Needs a PCMCIA slot, absent on virtually all modern laptops
  • ✗ Passive adapter, so speed is capped by the host PC card slot
  • ✗ No USB fallback if the target machine lacks a PC card bay

Manufacturer description

The Transcend PCMCIA ATA Adapter solves a specific problem: getting a CompactFlash card into a laptop or device that only has a PC Card slot. It converts a 50-pin CompactFlash card to the standard 68-pin PCMCIA form factor, so your CF media reads and writes through any PC card slot without a separate USB reader or dongle. Compatibility covers Type I CompactFlash cards, and Transcend lists support for Windows 7, 8, and 10, Mac OS X 10.0 or later, and Linux kernel 2.6.30 or later, which makes it a practical bridge for vintage ThinkPads, industrial equipment, digital camera workflows, and retro…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Transcend PCMCIA Ata Adapter for Cf 2 Card, so this read rests on the manufacturer's listed specs and the current price in the storage adapters category (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. On the listing's own facts, the case for it is "Converts 50-pin CF to 68-pin PCMCIA in one passive adapter"; the main trade-off is "Type I CompactFlash only, so thicker Type II cards are excluded". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this work with a Type II CompactFlash card or a Microdrive?

Transcend lists full compatibility with Type I CompactFlash cards only. Type II cards and Microdrives are physically thicker, so check the product listing before ordering if that is your media.

Do I need to install drivers to use this adapter?

No. It is a passive pin converter, and Transcend lists support for Microsoft Windows 7, 8, and 10, Mac OS X 10.0 or later, and Linux kernel 2.6.30 or later without extra software.

Is it faster than a USB CompactFlash card reader?

It reads and writes through the PC card slot's ATA interface rather than a USB bridge chip, so throughput is set by your laptop's PCMCIA controller rather than a USB 1.1 or 2.0 bottleneck.

Can I use this in a modern laptop?

Only if it has a PCMCIA or PC Card slot. Most machines built in the last decade dropped that bay, so this adapter is aimed at vintage laptops, industrial hardware, and retro PC builds.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Converts 50-pin CompactFlash card to 68-pin PCMCIA
  • Fully compatible with Type I CompactFlash cards
  • Fast read and write to a CompactFlash card via any PC card slot
  • Operating System-Microsoft Windows 7, 8, 10, Mac OS X 10.0 or later and Linux Kernel 2.6.30 or later

Full Specifications

BrandTranscend
Colorsilver
FinishAta
Unit Count1 Count
Model NumberTS0MCF2PC
CompatibilityPC, Mac, Linux
Input Voltage5 volts
Warranty TypeLimited
Connector TypePCMCIA
Item Dimensions2.13 x 3.37 x 0.13 inches
Mfr Part NumberTS0MCF2PC
Number of Items1
Number of Ports2
Power Plug TypeNo Plug
Item Part NumberTS0MCF2PC
Compatible DevicesPC
Warranty Description2 Year Manufacturer
Item dimensions L x W x H2.13 x 3.37 x 0.13 inches
Specific Uses For Productpersonal
Global Trade Identification Number00760557784647, 00778888375670, 00999998532733

Ready to buy?

Transcend PCMCIA Ata Adapter for Cf 2 Card is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $16.69

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →