Skip to main content
Tripp Lite SATA to eSATA Transition Cable (7Pin/18-In.(P952-18I)
TRIPP LITE

Tripp Lite SATA to eSATA Transition Cable (7Pin/18-In.(P952-18I)

Bottom line: The Tripp Lite SATA to eSATA Transition Cable: Full 6.0 Gbps SATA III transfer rate, no bandwidth bottleneck; main trade-off: 18 in. length only; no slack for tower-to-desk routing.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Full 6.0 Gbps SATA III transfer rate, no bandwidth bottleneck
  • ✓ Shielded jacket blocks EMI/RFI line noise on the run
  • ✓ Lifetime warranty from Tripp Lite
  • ✓ Internal L-connector to external I-connector in one cable

Cons

  • ✗ 18 in. length only; no slack for tower-to-desk routing
  • ✗ Data only, no power leg for bus-powered eSATA drives
  • ✗ Requires a free rear slot or knockout to route out
  • ✗ One connection per cable; no multi-drive fanout

Manufacturer description

Tripp Lite SATA to eSATA transition cable allows new eSATA devices to be connected to older style SATA ports. Cable is optimized for data storage with up to 6Gbps transfer rate.

SpecPicks Verdict

SpecPicks scored Tripp Lite SATA to eSATA Transition Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. TRIPP LITE's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • Sata internal "L" To external eSATA "I" Cable - 18 in.
  • Supports data transfer Rates of up to 6.0 Gbps
  • Cable is shielded to protect against EMI/RFI line noise
  • Lifetime warranty

Full Specifications

BrandTRIPP LITE
ColorRed
ModelP952-18I
Frequency6 GHz
Cable TypeSATA
Item ShapeRound
Model NameP952-18I
Unit Count1 Count
Item Length18 inches
Part NumberP952-18I
Connector TypeSata
Number of Pins7
Number of Items1
Special FeatureData Transfer
Connector GenderMale-to-Male
Specification MetUnspecified Industry Standards
Compatible DevicesComputer, External Hard Drive, SSD, Storage Device
Data Transfer Rate3 gigabits_per_second
Included ComponentsP952-18I SATA to eSATA Transition Cable (7Pin/7Pin), 18 in.
Indoor Outdoor UsageIndoor, Outdoor

Ready to buy?

Tripp Lite SATA to eSATA Transition Cable (7Pin/18-In.(P952-18I) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →