KALEA-INFORMATIQUE Converter SATA to IDE Adapter 2.5" 44 Points
Bottom line: The KALEA-INFORMATIQUE Converter SATA to IDE Adapter 2.5" 44 Points: Keeps IDE and SATA connectors on the same axis, so no offset inside tight laptop bays; main trade-off: product listing offers only two bullet features and defers everything to the description.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Keeps IDE and SATA connectors on the same axis, so no offset inside tight laptop bays
- ✓ 2011 revision is physically shorter than earlier versions for cramped 2.5" drive caddies
- ✓ Targets the 44-pin 2.5" laptop IDE port specifically, not the 40-pin desktop standard
- ✓ Backed by a 1 year warranty from KALEA-INFORMATIQUE
Cons
- ✗ Product listing offers only two bullet features and defers everything to the description
- ✗ No stated chipset, maximum drive capacity, or SATA revision support
- ✗ Aligned-axis design still adds length that some slim laptop bays cannot absorb
- ✗ 44-pin 2.5" only, so it will not serve 40-pin desktop IDE builds
Manufacturer description
Converter SATA to IDE Adapter 2.5" 44 points - To mount a SATA hard drive on a PC Laptop 2.5" IDE port - IDE AND SATA CONNECTORS IN THE SAME AXIS - New version 2011 shorter!
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for KALEA-INFORMATIQUE Converter SATA to IDE Adapter 2.5" 44 Points, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. On the listing's own facts, the case for it is "Keeps IDE and SATA connectors on the same axis, so no offset inside tight laptop bays"; the main trade-off is "Product listing offers only two bullet features and defers everything to the description". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Please read full description below.
- Warranty : 1 year.
Full Specifications
| Brand | KALEA-INFORMATIQUE |
|---|---|
| Color | Schwarz |
| Warranty | 1 year. |
| Unit Count | 1 count |
| Model Number | 2716721 |
| Compatibility | PC |
| Connector Type | IDE, SATA |
| Mfr Part Number | 2716721 |
| Number of Ports | 1 |
| Power Plug Type | No Plug |
| Compatible Devices | PC, Laptop |
| Full listing title | KALEA-INFORMATIQUE Converter SATA to IDE Adapter 2.5" 44 Points - to Mount a SATA Hard Drive on a PC Laptop 2.5" IDE Port - IDE and SATA CONNECTORS in The Same AXIS - New Version 2011 Shorter! |
Ready to buy?
KALEA-INFORMATIQUE Converter SATA to IDE Adapter 2.5" 44 Points - to Mount a SATA Hard Drive on a PC Laptop 2.5" IDE Port - IDE and SATA CONNECTORS in The Same AXIS - New Version 2011 Shorter! is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc LLM Inference: A770 & B580 Qwen3 tok/s Guide
- Radxa Rock 5B+ Review (2026): The Enthusiast's RK3588 Board
- GPU Deals for Local LLMs 2026: 12GB vs 16GB Cards
- Best Budget Gaming Monitor in 2026: 5 Picks From 1440p to 4K
- Best Streaming Setup Gear for Beginners in 2026
- Can a Raspberry Pi 4 8GB Run Local LLMs in 2026?
- Best Hardware for Running MoE LLMs Locally in 2026
- Used RTX 3090 for Local LLMs (Nov 2026): Real Prices, Speeds, Servicing
- Best Steam Deck Dock for 4K Gaming on a TV in 2026
- LLM-Driven Driver Install on Windows 98: How Claude Walks Voodoo + Sound Blaster Setup
- Best Racing Wheel for Forza Horizon 6 on PC (2026)
- Best Budget GPU for CNN and Image-Model Training in 2026: The RTX 3060 12GB Deep Dive
- Samsung Odyssey OLED G9 Drops $700 — and a Cheaper 4K Path
- Gemma 4 12B Speech-to-Text on an RTX 3060 12GB: Local Transcription tok/s
- Can the RTX 3060 12GB Still Game at 1440p in 2026?
- Qwen 3.6 35B-A3B KV Cache Deep Dive: Memory, PPL, and Quantization Tradeoffs
- 10 Raspberry Pi Projects Worth Building in 2025
- Best Mouse and Mousepad for FPS Aim Training in 2026
- Best Budget Gaming PC Parts Under $700 in 2026
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
- NVIDIA's AI Servers Run on Hot Tub Coolant — No Evaporators Neede
- Local Image Generation AI in 2026: AMD Hardware Performance & Setup Guide
- How to run Qwen 3 32B on Arc B580
- Intel Arc Pro B60 AI: 24GB VRAM for Local LLMs in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090