EVERCOOL EC8010M12CA 80mm x 10mm 3 Pin Ball Bearing Fan
Bottom line: Per its Amazon listing, the EVERCOOL EC8010M12CA 80mm x 10mm 3 Pin Ball Bearing Fan: model: EC8010M12CA Voltage: 12v Bearing Type: Ball; size: 80mm x 80mm x 10mm Current: 0.20A Fan.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Model: EC8010M12CA Voltage: 12v Bearing Type: Ball
- ✓ Backed by Evercool's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Item Specifications Model: EC8010M12CA Size: 80mm x 80mm x 10mm Current: 0.20A Fan Speed: 3000 RPM +/- 15% Air Flow: 22.44 CFM Noise Level: <27.3 dBA Lead Length: 10" Connector: 3 Pin tach style connector+ 4 Pin Molex adapter Bearing Type: Ball bearing Retail Packaged NEW (Screws provided)
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for EVERCOOL EC8010M12CA 80mm x 10mm 3 Pin Ball Bearing Fan, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Model: EC8010M12CA Voltage: 12v Bearing Type: Ball
- Size: 80mm x 80mm x 10mm Current: 0.20A Fan
- Speed: 3000 RPM +/- 15% Air Flow: 22.44 CFM
- Noise Level: <27.3 dBA Lead Length: 10"
- Connector: 3 Pin tach style connector + 4 Pin Molex adapter
Full Specifications
| Size | 80mm x 80mm x 10mm Current: 0.20A Fan |
|---|---|
| Brand | Evercool |
| Model | 605 |
| Speed | 3000 RPM +/- 15% Air Flow: 22.44 CFM |
| Voltage | 12 volts |
| Wattage | 2400 Milliwatts |
| Material | Lead |
| Connector | 3 Pin tach style connector + 4 Pin Molex adapter |
| Unit Count | 1 Count |
| Noise Level | 27 db |
| Part Number | EC8010M12CA |
| Material Type | Lead |
| Cooling Method | Air |
| Air Flow Capacity | 22.44 cfm |
| Compatible Devices | Desktop |
| Power Connector Type | 3 pin,4 pin |
| Maximum Rotational Speed | 3000 rpm |
| Item Dimensions L x W x H | 3.15"L x 0.39"W x 3.15"H |
Benchmark data for other processors
Ready to buy?
EVERCOOL EC8010M12CA 80mm x 10mm 3 Pin Ball Bearing Fan is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Is an RTX 3060 Enough for 4K Gaming? Pairing It With a Budget 4K Monitor
- Best Microphones for Streaming and Podcasting (2026)
- Can the Ryzen 5 5600G Game at 1080p Without a Graphics Card in 2026?
- Voodoo 5 6000 Benchmarks: Quake III at Five Resolutions
- Best Hardware for Local OCR and Document AI in 2026
- Build a Low-Power Jellyfin Server on a Raspberry Pi 4 8GB in 2026
- Best GPU for Llama 3.1 8B (2026)
- AI-Driven Win98 Voodoo Driver Install: A Repeatable Vision-LLM Playbook for the Sound Blaster Audigy FX
- Pi Pico Puts Bluetooth Keyboards on the I2C Bus
- What Non-Gaming Tasks People Actually Run on Steam Deck
- Steam Deck OLED vs ROG Ally X vs Legion Go: 2026 Gaming Handheld Shootout
- Best Retro PC Upgrade Kit 2026: Sound & Storage
- Ultrawide vs 27-Inch 4K for Sim Racing on a G29 and RTX 3060
- RTX PRO 6000 vs RTX 5090 for Local 70B LLMs: 96GB vs 32GB
- Best SSD for Expanding Your Steam Library in 2026: SATA Value Picks
- Qwen 3.8 Open Weights on a 12 GB RTX 3060: What Actually Fits
- How to run Llama 3.1 70B on Apple M4 Max
- Best SSD for Steam Deck and Handheld Emulation in 2026
- Mistral Medium 3.5 Hardware Requirements: 128B Dense, 78 GB at Q4
- Best 2.5" SATA SSD to Upgrade a PS4 Pro in 2026
- Is My GPU Dying? 5 Warning Signs to Check Now
- Raspberry Pi OS Moves to Linux 6.18 LTS: Performance Gains for Pi 4 Owners
- ExLlamaV2 vs llama.cpp for Single-User Chat on an RTX 3060 12GB in 2026
- BENGOO G9000 vs Turtle Beach Recon 50: Best Sub-$40 Wired Headset
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090