SABRENT

SABRENT 2.5 Inch to 3.5 Inch Internal Hard Disk Drive Mounting Bracket Kit (BK-HDDH)

Name: SABRENT 2.5 Inch to 3.5 Inch Internal Hard Disk Drive Mounting Bracket Kit (BK-HDDH)
Brand: SABRENT
SKU: B00G57BN1M
Price: 6.95 USD
Availability: InStock

By Mike Perry, Hardware Editor · Verified 2026-09-15

Mike Perry has researched PC hardware since 2014, tracking 80+ GPU generations, 50+ retro handheld platforms, and 30+ vintage PC configurations. He synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. View full credentials →

$6.95

As an Amazon Associate, SpecPicks earns from qualifying purchases.

🛒 See live eBay price Also on Amazon — View Current Price → Compare to similar drives & media

*Price sourced from Amazon.com. Last updated 2026-08-18. Price and availability subject to change.

Bottom line: The SABRENT 2.5 Inch to 3.5 Inch Internal Hard Disk Drive Mounting Bracket Kit (BK-HDDH) is a specs-and-price decision rather than a crowd-consensus one in the drives & media category, priced around $6.95. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.

The SABRENT BK-HDDH mounting bracket kit solves a specific problem in older cases and retro builds: a 2.5-inch drive with nowhere to sit. This SABRENT adapter bracket holds your 2.5-inch hard drive or SSD in a standard 3.5-inch internal drive bay, aligning the mounting holes so the drive sits square and stays put instead of dangling on a cable behind the front panel. It works with any 2.5-inch drive, spinning or solid state, and the kit ships with the screw pack you need, so you are not hunting through a parts bin mid-build. Installation is a few screws and a drive-bay slide, which matters…

SpecPicks Verdict

SpecPicks scored SABRENT 2.5 Inch to 3.5 Inch Internal Hard Disk Drive Mounting… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the drives & media category. SABRENT's drives & media lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for drives & media of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.

Frequently Asked Questions

Will this work with a 2.5-inch SSD, not just a hard drive?

Yes. SABRENT lists compatibility with all types of 2.5-inch drives, SSDs included, so a SATA SSD mounts the same way a 2.5-inch spinner does.

Do I need to buy screws separately?

No. A screw pack is included in the kit to mount the drive to the bracket.

Will this fit an external drive bay or only internal?

It is designed for a 3.5-inch internal drive bay. Front-facing external bays are typically 5.25-inch and need a different adapter.

Does the bracket include a SATA cable or power adapter?

The listed contents are the bracket and a screw pack. Plan on using your case's existing SATA data and power cables.

Is this a good pick for an older or retro PC build?

Yes. Legacy towers were built around 3.5-inch bays, so this bracket is the standard way to fit a modern 2.5-inch SSD into one.

Pros & Cons

Pros

✓ Convert any 2 2.5" Hardrive into a 3.5" drive bay
✓ Backed by SABRENT's warranty and support channels
✓ Ships via Amazon with Prime eligibility and the standard returns policy

Cons

✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified

Key Features

Convert any 2 2.5" Hardrive into a 3.5" drive bay
Compatible with all types of 2.5" hard drive. Including SSD DRIVES!!!
Quick and easy installation
For use in 3.5" internal drive bay
Screw pack included to mount the drives

Full Specifications

Brand	SABRENT
Color	Black
Material	Alloy Steel
Set Name	2.5" to 3.5" Mounting Bracket Kit
Item Depth	0.64 inches
Unit Count	1.0 Count
Finish Types	Black
Model Number	BK-HDDH
Material Type	Alloy Steel
Mounting Type	Embedded
Item Type Name	Sabrent BK-HDDH 2.5" to 3.5" Internal Hard Disk Drive Mounting Kit
Item Dimensions	4.16 x 4.16 x 0.64 inches
Included Components	Bag of screws, SABRENT Mounting Bracket Kit, User Manual
Manufacturer Part Number	BK-HDDH
Item dimensions L x W x H	4.16 x 4.16 x 0.64 inches
Manufacturer Warranty Description	1 Year warranty
Global Trade Identification Number	00819921010995, 08199210109954

Ready to buy?

SABRENT 2.5 Inch to 3.5 Inch Internal Hard Disk Drive Mounting Bracket Kit (BK-HDDH) is sold on the used and vintage market, where eBay carries the live inventory — Amazon does not stock this part. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

See live eBay listings →

*Price sourced from Amazon.com. Last updated 2026-08-18. Price and availability subject to change.