MPD Digital I LMR®400 Times Microwave Coaxial Cable I PL259 Male to PL259 Male UHF MPD Connectors I Low Loss RF Coaxial Cable I CB, Ham Radio, Transmitters, Antenna I 30ft
Bottom line: The MPD Digital I LMR®400 Times Microwave Coaxial Cable I PL259 Male to ($84.88 on Amazon as of 2026-10-06): Genuine Times Microwave LMR-400, not a generic lookalike; main trade-off: .405in diameter is stiff for tight cable-management bends.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Genuine Times Microwave LMR-400, not a generic lookalike
- ✓ Center conductor soldered into each PL-259, not crimp-only
- ✓ Nickel-plated brass PL-259 connectors resist corrosion
- ✓ Drop-in replacement for RG-8 and 9913 feedline runs
Cons
- ✗ .405in diameter is stiff for tight cable-management bends
- ✗ PL-259 ends only; no N or SMA option on this SKU
- ✗ Overkill for short bench jumpers under a few feet
- ✗ 30ft fixed length means slack to coil if your run is shorter
Manufacturer description
The MPD Digital LMR-400 coaxial cable gives CB and ham operators a 30ft low-loss feedline built on genuine Times Microwave LMR-400, a direct drop-in replacement for RG-8 and 9913. Both ends terminate in crimped PL-259 UHF connectors made from nickel-plated brass, with the center conductor soldered rather than crimped alone, so your signal path stays solid through repeated antenna swaps and tuner reconfigurations. The double-shielded construction and foam dielectric cut insertion loss on the runs where it matters most, while the .405-inch (10.3mm) black polyethylene jacket is UV proof and…
SpecPicks Verdict
SpecPicks scored MPD Digital I LMR®400 Times Microwave Coaxial Cable I PL259 Male to… using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. MPD Digital's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Is this real Times Microwave LMR-400 or a copy?
The listing specifies LMR-400 from Times Microwave Systems, whose registered trademark it is. The cable is double-shielded with a foam dielectric and black PE jacket.
Will this work with my CB radio and antenna?
Yes. The PL-259 UHF connectors on both ends are the standard CB fitting, and MPD Digital lists CB, ham, UHF, VHF, and some scanners as intended uses.
Can I use it as a jumper to an antenna tuner or SWR meter?
That is a listed use. It is called out as a jumper to an antenna tuner, coax switch, meter, or main antenna, so a 30ft run covers most shack-to-mast layouts.
How thick and flexible is the cable?
Outer diameter is .405 inches (10.3mm) nominal with a flexible UV-proof polyethylene jacket. The foam dielectric aids flexibility, but it is noticeably stiffer than RG-58.
Are the connectors crimped or soldered?
Both. The PL-259 bodies are crimped nickel-plated brass, and the center conductor is soldered for signal integrity. Check the product listing for current warranty terms.
Key Features
- ULTRA LOW LOSS: This low loss transmission line can be used in almost any application where handling characteristics and when improved shield and low loss is required.
- CONNECTOR TYPE: This cable is made with high quality crimp PL-259 connectors. They are Nickel-plated brass and have the center conductor soldered to ensure an excellent signal.
- CABLE TYPE: LMR-400 is a Registered Trademark of Times Microwave Systems; LMR-400 Coaxial cable is a direct drop-in replacement for RG-8/9913. LMR-400 is a Low Loss Flexible Coax Cable Double Shielded with Black PE Jacket
- OUTER JACKET MATERIAL: Flexible UV Proof, Polyethylene, Outer Diameter: .405 (10.3mm) nom., SRL: per MIL-C-17/74 - Foam Dielectric Aids Flexibility.
- COMMON USE: These connectors are commonly used for CB, HAM, UHF, VHF and some scanners. Great as a jumer to an antenna tuner, switch, meter or main antenna.
Full Specifications
| Brand | MPD Digital |
|---|---|
| Color | Black |
| Model | rg213 |
| COMMON USE | These connectors are commonly used for CB, HAM, UHF, VHF and some scanners. Great as a jumer to an antenna tuner, switch, meter or main antenna. |
| Cable Type | LMR400 |
| Item Shape | Round |
| Model Name | 6IN LMR-400 UltraFlex |
| Unit Count | 1.0 Count |
| Item Length | 30 Feet |
| Part Number | rg213 |
| Compatibility | Switch |
| Connector Type | Pl261 |
| Number of Pins | 2 |
| Outer Material | Polyethylene |
| Number of Items | 1 |
| Special Feature | Shock Resistant |
| Connector Gender | Male-to-Male |
| Specification Met | Cb |
| Compatible Devices | Router |
| Indoor Outdoor Usage | Indoor, Outdoor |
Ready to buy?
MPD Digital I LMR®400 Times Microwave Coaxial Cable I PL259 Male to PL259 Male UHF MPD Connectors I Low Loss RF Coaxial Cable I CB, Ham Radio, Transmitters, Antenna I 30ft is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Windows XP Gaming Laptops in 2026: A Realistic Buying Guide
- WoW Mythic+ 3500 on Steam Deck: Is It Possible?
- AMD Instinct MI300X vs Consumer GPUs: What Local AI Builders Should Buy in 2026
- Troubleshooting Ryzen 7 5800X Memory Training, Boot Loops, and Cold-Start Hangs on B550 in 2026
- Best Budget SATA SSD for a Retro PC Build in 2026
- Best USB Microphone for Discord and Office Calls Under $200 (2026)
- Best Budget Gaming Keyboard Under $50 in 2026
- Best Raspberry Pi 5 Starter Kits and Accessories for Home Lab Builds (2026)
- Best Gaming Monitor for Console and PC Hybrid Setups Under $300 in 2026
- Imaging Your Big-Box CD-ROM Collection: A CompactFlash + IDE Workflow
- Best Budget Gaming PC Build 2026: AMD Parts Guide
- Best Streaming Setup Under $400: G502 + QuadCast 2 S + Cam Link 4K vs the Bundle Alternatives
- Benchmarking Open LLMs for Tool-Use: RTX 3060 12GB vs Ryzen 5800X CPU-Only
- Raspberry Pi 4 8GB vs Pi 5 vs Pi Zero W for a 2026 Homelab
- Period-Correct Sound for a Modern Retro PC: The Sound Blaster G6 and the EAX Legacy
- This Open-Source KVM Runs a Pentium 4 Instead of a Raspberry Pi
- Raspberry Pi 4 8GB Local LLM Throughput in 2026
- AMD Ryzen 9 9950X3D2 Runs Faster on Linux Than Windows 11
- RTX 5090 vs RTX 4080: Specs, Gaming & AI Compared
- Solar-Powered Bird Identifier: Raspberry Pi Zero 2W + AI Camera
- ASUS A7N8X-Deluxe + Athlon XP Barton 2500+: The Definitive 2003 Enthusiast Build Guide
- Cloning a Win98 Voodoo3 Boot Drive: SATA-IDE Adapter Workflow
- RTX 3060 12GB vs Ryzen 5 5600G iGPU for Entry Local LLM Inference
- Raspberry Pi AI Kit 2025: Specs, Uses, and Limits
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090