Noctua NF-P14r redux-1500 PWM, High Performance Cooling Fan, 4-Pin, 1500 RPM (140mm, Grey)
Status: Noctua NF-P14r redux-1500 PWM: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The Noctua NF-P14r redux-1500 PWM: 4-pin PWM lets the motherboard throttle it to near-silence at idle; main trade-off: grey redux styling replaces the accessory kit found on retail Noctua fans.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — an in-stock alternative:
Similar: Noctua NF-P14s redux-1200 PWM — $17.95 on Amazon as of 2026-11-07 05:23 UTC (price may vary).
Pros & Cons
Pros
- ✓ 4-pin PWM lets the motherboard throttle it to near-silence at idle
- ✓ Round frame fits NH-D15 and NH-D14 tower coolers without clearance issues
- ✓ 25.8 dB(A) ceiling at full 1500 RPM keeps it quiet under load
- ✓ Rated >150,000 hours MTTF, so it outlasts most builds it goes into
Cons
- ✗ Grey redux styling replaces the accessory kit found on retail Noctua fans
- ✗ Anti-vibration mounts and y-splitters are sold separately, not in the box
- ✗ 1500 RPM ceiling is lower than high-static-pressure industrial 140mm fans
- ✗ No RGB or lighting of any kind for showcase builds
Manufacturer description
The Noctua NF-P14r redux-1500 PWM brings the airflow profile of Noctua's award-winning NF-P14r 140mm fan to a streamlined, budget-conscious package. You get a 140x140x25 mm round-frame 12V fan spinning up to 1500 RPM, with a 4-pin PWM header that hands speed control straight to your motherboard, so the fan ramps up under load and drops to near silence at idle. Noise tops out at 25.8 dB(A) even at full tilt, and the >150,000 hour MTTF rating means this is a fan you install once and forget about. The round frame is the detail that matters for air-cooler owners: it mounts cleanly on tower…
SpecPicks Verdict
SpecPicks scored Noctua NF-P14r redux-1500 PWM using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. Noctua's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this fit a Noctua NH-D15 CPU cooler?
Yes. The NF-P14r redux uses a 140x140x25 mm round frame specifically designed for air-based CPU coolers including the NH-D15 and NH-D14.
How loud is the NF-P14r redux-1500 PWM?
Noctua rates it at a maximum of 25.8 dB(A) at its full 1500 RPM. With 4-pin PWM control, your motherboard drops it well below that at idle.
Does it support automatic fan speed control?
Yes. It is a 4-pin PWM fan running on 12V, so any motherboard header with PWM support will ramp it between idle and 1500 RPM automatically.
What is the difference between the redux and the standard NF-P14r?
The redux is the streamlined edition: the same NF-P14r impeller and frame at a lower price, in grey, with accessories like anti-vibration mounts sold separately.
How long is this fan expected to last?
Noctua rates it at more than 150,000 hours MTTF. Check the product listing for current warranty terms from the manufacturer.
Key Features
- High performance cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 25.8 dB(A), >150,000 h MTTF
- Renowned NF-P14r high-end 140x25mm round-frame 12V fan, more than 100 awards and recommendations from international computer hardware websites and magazines, hundreds of thousands of satisfied users
- Highly optimised low-noise design provides outstanding quietness of operation, excellent static pressure and strong airflow (CFM), round frame for air-based CPU coolers such as NH-D15 or NH-D14
- 1500rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle)
- Streamlined redux edition: proven Noctua quality at an attractive price point, wide range of optional accessories (anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc.)
Full Specifications
| Brand | Noctua |
|---|---|
| Model | NF-P14r redux-1500 PWM |
| Voltage | 12 volts |
| Material | Fibre-glass reinforced PBT |
| Dimensions | 140x140x25 mm |
| Unit Count | 1 Count |
| Noise Level | 25.8 db |
| Part Number | NF-P14r redux-1500 PWM |
| Material Type | Fibre-glass reinforced PBT |
| Cooling Method | Air |
| Number of Items | 1 |
| Vibration/Rumble | Yes |
| Air Flow Capacity | 133.7 cubic meter per hour |
| Compatible Devices | Desktop |
| Included Components | fan, mounting screws |
| Power Connector Type | 4-Pin |
| Warranty Description | 6 year manufacturer’s warranty |
| Maximum Rotational Speed | 1500 rpm |
| Item Dimensions L x W x H | 5.51"L x 5.51"W x 0.98"H |
| Global Trade Identification Number | 04716123315278 |
Benchmark data for other processors
Ready to buy?
Amazon shows no buyable offer for Noctua NF-P14r redux-1500 PWM at the last check. A similar in-stock product is Noctua NF-P14s redux-1200 PWM. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget 4K Gaming Monitor for an RTX 3060: KOORUI vs Samsung Odyssey
- Best PS4 & PS5 Controllers for PC Gaming in 2026
- Aider vs Cline vs Cursor for Local + Cloud Coding in 2026
- Sound Blaster Audigy FX vs Sound BlasterX G6: Picking a Card for Retro and Modern Dual-Boot
- Best AMD CPU for Gaming in 2026: Our Top 5 Ryzen Picks
- Noctua-Style Pi 5 NAS Build Goes Viral — Here's the Parts List
- Open-Weight Models Caught Up to Frontier: What to Run on a 12GB GPU
- Self-Hosted Jellyfin on a Raspberry Pi 4 8GB: What 1080p Transcoding Really Costs
- The Hackaday Europe 2026 Retro PC Build: What They Actually Built and Why It Matters
- Which GPU Runs Which LLM in 2026: The RTX 3060 12GB Model-Fit Matrix
- Sound Blaster Audigy FX vs Sound Blaster Live! for Period-Correct Win98 Builds
- 8BitDo SN30 Pro on SNES Classic and Genesis Mini: Bluetooth Setup Guide
- Imaging Vintage IDE Drives to Preserve 90s Game CDs
- 256GB microSD Drops to $32 — but for a Game Library, a SATA SSD Still Wins
- CRT vs Monitor for Retro Gaming: Which Wins in 2026
- Build a Silent Home NAS on a Raspberry Pi 4 8GB With a SATA SSD (2026)
- Best GPU for an AI rig in 2026 — the shortlist
- How to Fix a Raspberry Pi 5 That Won't Boot: Power, microSD, and Display Diagnostics
- Best Gaming Headsets and Streaming Mics for Console + PC (2026)
- Qwen MTP on LLaMA.cpp + TurboQuant: What's Actually Verified
- After the Mythos Cyber-Ops Report, Why Run AI on an Air-Gapped Local Box
- Best Parts for a Local RAG Document-QA Workstation in 2026
- GeForce 4 Ti 4600 Won't Boot Past POST: AGP Voltage and BIOS Field Guide
- Best Budget SSD for Gaming in 2026: 5 Tested Picks Ranked
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090