chenyang M.2 NGFF SATA SSD to 2.5" SATA Hard Disk PCB Converter Adapter(Not Work NVEM SSD to SATA)
Bottom line: The chenyang M.2 NGFF SATA SSD to 2.5" SATA Hard Disk PCB Converter: Boots OS directly as system disk, no drivers needed; main trade-off: B-key/B+M-key only; M-key SSDs will not fit.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Boots OS directly as system disk, no drivers needed
- ✓ Verified on E431, E531, X240, Y410P, Y510P laptops
- ✓ Broad OS support: DOS, Win 95-7, Linux, Unix
Cons
- ✗ B-key/B+M-key only; M-key SSDs will not fit
- ✗ SATA-only PCB, will not work with NVMe SSDs
- ✗ Limited to 3.3V, 3A max input current
- ✗ No enclosure included, bare PCB adapter
SpecPicks Verdict
SpecPicks scored chenyang M.2 NGFF SATA SSD to 2.5" SATA Hard Disk PCB Converter… using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. chenyang's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Note: The adapter only work for B-key or B/M-key socket, cannot work for M-key socket.
- M.2 SSD input voltage: 3.3V , input max. current: 3A.
- Work for E431 E531 X240 Y410P Y510P M.2 NGFF PCI-E 2 LANE SSD.
- It can operate in a variety of operating systems. Such as DOS, Windows 95, 98, XP, 2000, Vista, Win 7, Linux, Unix, and so on.
- The adapter allows the installation of SSD as system disk, boot the operating system directly, without having to install any drivers, but does not affect the execution speed of the SSD storage devices.
Full Specifications
| Note | The adapter only work for B-key or B/M-key socket, cannot work for M-key socket. |
|---|---|
| Brand | chenyang |
| Color | Green |
| Finish | Matte |
| Unit Count | 1 Count |
| Model Number | CY-SA-123 |
| Compatibility | Linux |
| Input Voltage | 3.3 volts |
| Nominal Power | 9.9 watts |
| Warranty Type | Limited |
| Connector Type | Ngff |
| Item Dimensions | 3.94 x 3.94 x 0.39 inches |
| Mfr Part Number | SA-123 |
| Number of Items | 22 |
| Number of Ports | 1 |
| Power Plug Type | No Plug |
| Compatible Devices | PC |
| M.2 SSD input voltage | 3.3V , input max. current: 3A. |
| Item dimensions L x W x H | 3.94 x 3.94 x 0.39 inches |
| Specific Uses For Product | M.2 NGFF PCI-E 2 LANE SSD adapter for specific Lenovo laptop models |
Ready to buy?
chenyang M.2 NGFF SATA SSD to 2.5" SATA Hard Disk PCB Converter Adapter(Not Work NVEM SSD to SATA) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Building a Budget Sim Racing Setup: Logitech G920 vs Thrustmaster TH8A Shifter
- 3dfx Voodoo5 5500 PCI Boots in a Modern ASUS Z77 Board
- GTX 1050 Ti 4GB vs Raspberry Pi 4 8GB for Qwen3 1.7B Local Inference
- Ryzen 7 5700X vs 5800X for a 2026 Gaming and Streaming Build
- xAI Open-Sources Grok-Build: Running Agentic Coding on Your Own GPU
- Best Budget SSDs for Gaming PC Builds in 2026
- Ryzen 5 5600X vs Ryzen 5 5600G for CPU-Only Gemma 3 12B
- Small Form Factor Gaming PC Build Guide for 2024
- AVX-512 Lifts Linux RAID Up to 41% on AMD Ryzen Chips
- llama.cpp vs Ollama on an RTX 3060: Which Runs GLM-5.2 Faster?
- Running a Modern SATA SSD in a Windows XP Retro Gaming PC
- DeepSeek V4 Pro Local Inference: Hardware Requirements and Cost-Per-Million-Tokens vs API
- Build or Buy a Gaming PC in 2026? The Real Tradeoffs
- That $850 Prebuilt With $1,200 of Parts: What the Math Actually Says
- HyperX QuadCast 2 vs Blue Yeti for Twitch in 2026
- Transcend CF133 CompactFlash as a Windows 98 Boot Drive: Setup & Gotchas
- Best $1000 Gaming PC Build for 2026: Parts We'd Actually Buy
- Best GPU for the Ryzen 7 5800X3D in 2026: No-Bottleneck Picks
- Running Qwen3.6 35B A3B at 80 tok/s on a 12GB GPU: What the MSI RTX 3060 12GB Setup Looks Like
- The vLLM MCP Vulnerability: What Local LLM Operators Need to Do
- Qwen 3.6 27B on 24GB VRAM: Backend, Quant + Settings Synthesis
- Grok Imagine Hits #5: Can a $300 RTX 3060 Run Local Image AI?
- Quake 3 + UT99 Dedicated Server on Raspberry Pi 4 8GB: Headless AI-Managed Setup (2026)
- Moonshot Pauses Kimi K3 Signups After GPU Demand Maxes Out
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090