G.SKILL
G.SKILL RipjawsV Series DDR4 RAM (XMP) 16GB (2x8GB) 3200MT/s CL16-18-18-38 1.35V Intel AMD Desktop Computer Memory U-DIMM - Black (F4-3200C16D-16GVKB)
Bottom line: The G.SKILL RipjawsV Series DDR4 RAM ($134.99 on Amazon as of 2026-10-08): 16GB (2x8GB) matched dual-channel kit, not two singles binned separately; main trade-off: DDR4 only, so it will not drop into a DDR5 AM5 or LGA1700 DDR5 board.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-08. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 16GB (2x8GB) matched dual-channel kit, not two singles binned separately
- ✓ DDR4-3200 CL16-18-18-38 at only 1.35V
- ✓ Intel XMP profile plus JEDEC fallback for no-BIOS-tweak booting
- ✓ Low-profile black heatspreader clears most large tower air coolers
Cons
- ✗ DDR4 only, so it will not drop into a DDR5 AM5 or LGA1700 DDR5 board
- ✗ 16GB total is tight for heavy multitasking or large local LLM work
- ✗ Non-ECC, so no fit for ECC-required workstation or NAS builds
- ✗ Rated 3200MT/s requires manually enabling XMP/DOCP/A-XMP in BIOS
Manufacturer description
The G.SKILL RipjawsV Series DDR4 kit (F4-3200C16D-16GVKB) pairs two 8GB U-DIMMs into a 16GB matched set rated for DDR4-3200 at CL16-18-18-38 timings and 1.35V. It ships with both a JEDEC default SPD profile and an Intel XMP profile, so the kit boots at stock speed on compatible hardware and reaches its 3200MT/s rating once you enable XMP, DOCP, or A-XMP in BIOS. The 288-pin non-ECC design targets desktop and gaming builds, and the low-profile Ripjaws V heatspreader in black clears most tower coolers without the clearance headaches taller kits create. G.SKILL sells the modules as a matched…
SpecPicks Verdict
SpecPicks scored G.SKILL RipjawsV Series DDR4 RAM (XMP) 16GB (2x8GB) 3200MT/s… using a rating × review-volume × price-fit model applied to published specs and reviews across the memory & ram category. G.SKILL's memory & ram lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for memory & ram of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this RAM work in an AMD Ryzen build?
Yes, it is a standard 288-pin DDR4 U-DIMM for desktop Intel and AMD platforms. The overclock profile is Intel XMP, but AMD boards read it as DOCP or A-XMP. Check the G.SKILL QVL or RAM Configurator for your specific motherboard.
Why does my system show 2133MHz or 2400MHz instead of 3200?
The kit boots at its JEDEC default SPD speed with default BIOS settings. Enter BIOS and enable the XMP (or DOCP/A-XMP) profile to reach the rated DDR4-3200 CL16-18-18-38 at 1.35V.
How much RAM is in this kit, and is it dual channel?
It is a 16GB kit made of two 8GB modules, so it populates two slots for dual-channel operation. G.SKILL sells the two sticks as a matched set designed to run together.
Can I buy a second kit later to get 32GB?
G.SKILL explicitly advises against mixing memory kits, since separately matched sets can cause stability issues or system failure. If you expect to need 32GB, buy a single 32GB kit instead.
Is this memory ECC, and will it work in a server?
No, these are non-ECC unbuffered U-DIMMs intended for desktop PC and gaming use. Platforms that require ECC or registered memory will not accept this kit.
Key Features
- G.SKILL RipjawsV Series DDR4 U-DIMM Memory Kit, Model: F4-3200C16D-16GVKB
- 16GB total capacity kit containing 2x8GB modules, rated for up to DDR4-3200 CL16-18-18-38 at 1.35V
- Non-ECC, DDR4 U-DIMM, 288-pin, for Desktop PC & Gaming
- Includes JEDEC default profile, and Intel XMP memory overclock profile
- Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
- Refer to G.SKILL memory QVL or RAM Configurator tool on the G.SKILL website for more details on validated motherboard and hardware.
Full Specifications
| Brand | G.SKILL |
|---|---|
| Voltage | 1.35 Volts |
| RAM Size | 16 GB |
| Model Name | RipJaws V |
| Form Factor | DIMM |
| Memory Speed | 3200 MT/s |
| Model Number | FBA_4719692004970 |
| Compatibility | PC |
| Item Type Name | DDR4 SDRAM Intel XMP |
| Number of Pins | 288 |
| Mfr Part Number | FBA_4719692004970 |
| Memory Generation | DDR4 |
| Compatible Devices | Desktop |
| Data Transfer Rate | 48 Gigabits Per Second |
| Memory Form Factor | UDIMM |
| Additional Features | Intel XMP |
| Computer Memory Size | 16 GB |
| Warranty Description | Limited Lifetime Manufacturer |
| RAM Memory Technology | DDR4 |
| Column Address Strobe Latency | 16 |
Ready to buy?
G.SKILL RipjawsV Series DDR4 RAM (XMP) 16GB (2x8GB) 3200MT/s CL16-18-18-38 1.35V Intel AMD Desktop Computer Memory U-DIMM - Black (F4-3200C16D-16GVKB) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-08. Price and availability subject to change.
Related Memory & RAM
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Build a Wall-Mounted Raspberry Pi 4 Arcade Cabinet: 3D-Printed Case, SSD Boot, Real BOM
- Radxa Rock 5B+ Review (2026): The Enthusiast's RK3588 Board
- JADEPUFFER Agentic Ransomware: Why a Local AI Rig Changes Your Threat Model
- How to Identify Any Vintage GPU: A Visual + GPU-Z Guide for Retro PC Builders
- Grok 4.5 at $0.31 a Task: When Cheap Cloud Beats a Local Build
- How to run Llama 3.1 70B on Apple M4 Max
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming Build
- Intelligence Index v4.1: The Agentic-Benchmark Shift and Your Local Rig
- Building a 2002 Windows XP Gaming Rig: GeForce 4 Ti, Sound BlasterX G6, CompactFlash Boot
- RTX 5090 vs RTX 6000: Specs, Gaming, AI Compared
- Build or Buy a Gaming PC in 2026? The Real Tradeoffs
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5080
- Building a Modern BYOC LAN Party Box: 8 Period-Correct Rigs for QuakeCon-Style Events in 2026
- 1998 3dfx Voodoo2 SLI Build Guide: Period-Correct Glide Gaming with a CompactFlash Boot Drive
- ATI Radeon 9700 Pro Install Guide: Catalyst Versions, AGP 8x Compatibility, and Period-Correct Drivers
- CUDA 13.3 and the RTX 3060: What Changes for Local LLM Inference
- Sound Blaster Audigy 2 ZS vs Audigy FX for Windows XP Gaming (2026)
- Is My CPU Sufficient for Light Universe Simulations?
- Best SSD for Retro PC IDE-to-SATA Builds (Win98, WinXP) in 2026
- Best Raspberry Pi 5 Home Lab Cluster Setup for Self-Hosting (2026)
- Best Budget 4K Gaming Monitor in 2026
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- Logitech G920 vs HORI Racing Wheel: Best Sim Racing Wheel for PS5 & PC
- Lossless Scaling on Steam Deck: Is It Worth It?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090