Teltonika RUT956 RUT956A30A00 Industrial 4G LTE Cellular Router
Bottom line: The Teltonika RUT956 RUT956A30A00 Industrial 4G LTE Cellular Router ($390.00 on Amazon as of 2026-10-07): Dual SIM plus eSIM with automatic carrier failover for uninterrupted uptime; main trade-off: tops out at 4G LTE with 3G fallback, no 5G support.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Dual SIM plus eSIM with automatic carrier failover for uninterrupted uptime
- ✓ RS232 and RS485 serial ports integrate legacy industrial and IoT equipment
- ✓ Certified for AT&T, Verizon, and T-Mobile across North America
- ✓ Built-in GNSS adds location tracking and positioning to deployments
- ✓ Teltonika RMS enables remote config, monitoring, and VPN over RutOS
Cons
- ✗ Tops out at 4G LTE with 3G fallback, no 5G support
- ✗ RutOS and RMS carry a learning curve for non-network engineers
- ✗ Wi-Fi tuned for reliability, not fast home streaming or gaming
- ✗ Industrial-grade unit is overkill for basic home internet needs
Manufacturer description
RUT956 is an industrial router that combines cellular, Wi-Fi, and wired connectivity options with automatic WAN failover and GNSS capabilities. Serial communication interfaces enable integrating more varied devices into the solution ecosystem, while I/O and advanced RutOS software facilitate equipment control, automation, and event notifications.
SpecPicks Verdict
SpecPicks scored Teltonika RUT956 RUT956A30A00 Industrial 4G LTE Cellular Router using a rating × review-volume × price-fit model applied to published specs and reviews across the networking category. Teltonika's networking lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for networking of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Reliable 4G LTE connectivity – Industrial-grade cellular router with 4G LTE support and fallback to 3G networks, designed to provide stable internet access for remote, mobile, and industrial applications.
- Dual SIM and eSIM support – Features dual SIM functionality with eSIM support, enabling flexible carrier selection and automatic failover to help maintain uninterrupted connectivity.
- Compatible with major North American carriers – Designed for use with AT&T, Verizon, and T-Mobile networks, making deployment simple across a wide range of IoT and enterprise applications.
- Industrial interfaces and GNSS – Equipped with Ethernet, RS232, and RS485 interfaces for integration with industrial equipment, plus built-in GNSS for location tracking and positioning services.
- Secure remote management – Supports Teltonika RMS for remote monitoring, configuration, and troubleshooting, along with advanced networking and VPN capabilities for secure communications.
Full Specifications
| Brand | Teltonika |
|---|---|
| Color | Black |
| Weight | 4g |
| Voltage | 1 Volts |
| Coverage | Global (location services), North, Central, and South America (cellular connectivity) |
| Frequency | 560 MHz |
| Model Name | RUT956A30A00 |
| Is Electric | Yes |
| Connectivity | WiFi |
| Model Number | RUT956A30A00 |
| Control Method | App |
| Controller Type | Switch |
| Mfr Part Number | RUT955_T7V3C0 |
| Number of Ports | 1 |
| Antenna Location | Home |
| Wi-Fi Generation | Wi-Fi 1, 2, 3 |
| Security Protocol | WPA2, WPA3 |
| Compatible Devices | Personal Computer |
| Data Transfer Rate | 300 Megabits Per Second |
| LAN Port Bandwidth | 10/100 megabits_per_second |
| Full listing title | Teltonika RUT956 RUT956A30A00 Industrial 4G LTE Cellular Router, Dual SIM with eSIM, Wi-Fi & Ethernet, RS232/RS485, GNSS, Compatible with AT&T, Verizon & T-Mobile, North America Version |
Ready to buy?
Teltonika RUT956 RUT956A30A00 Industrial 4G LTE Cellular Router, Dual SIM with eSIM, Wi-Fi & Ethernet, RS232/RS485, GNSS, Compatible with AT&T, Verizon & T-Mobile, North America Version is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Networking
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Best Raspberry Pi Alternative for Klipper in 2026 (and When the Pi Still Wins)
- Aider vs Cline vs Continue.dev for Local-LLM Coding on a 12GB GPU
- Best Upgrades for a DDR4 Gaming PC in 2026
- Best Gaming Headsets for PS5 and PC in 2026
- GPU Benchmark Data Freshness and Source Attribution in 2026
- Build a Jellyfin Media Server on a Raspberry Pi 4 8GB: Measured Perf
- AMD Instinct MI300X vs Consumer GPUs: What Local AI Builders Should Buy in 2026
- Logitech G29 vs HORI Force Feedback: Which Sim Wheel for Beginners?
- Local LLM Use Cases in 2026: What a 12GB Rig Actually Delivers
- Adding USB Audio to a Retro Windows XP Gaming PC: Sound BlasterX G6
- Steam Deck OLED vs ROG Xbox Ally X: 2026 Comparison
- Best Storage Upgrades for Gaming and Retro PCs in 2026
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
- Lenovo G02 Retro Handheld Reportedly Ships Preloaded With Pirated Games
- RTX 3060 12GB vs RTX 3090 for Local LLMs (2026)
- Best Wireless Controller for PC Gaming in 2026
- Add Wireless Controllers and More Games to Your SNES Classic & Genesis Mini in 2026
- GeForce FX 5900 Won't POST or Crashes in WinXP: Troubleshooting Guide
- RTX 3060 12GB vs Arc B580 12GB for Local LLMs in 2026
- Build a Private Security Camera on a Raspberry Pi (Ring Alternative) in 2026
- GPT and Claude Flunked Bridgewater's Finance Test — Why a Local RAG Box Fills the Gap
- Best GPU for Running Llama 70B Locally in 2026
- ASUS ProArt PA27USD Lands: 27-Inch OLED Aims at Gaming
- Sound Blaster Audigy 2 ZS vs Audigy FX for Windows XP Gaming (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090