Skip to main content
24 Pin to 8-Pin Power Supply ATX PSU Adapter Cable for DELL Motherboards
URIMPAVIDO

24 Pin to 8-Pin Power Supply ATX PSU Adapter Cable for DELL Motherboards

Bottom line: The URIMPAVIDO 24 Pin to 8-Pin Power Supply ATX PSU Adapter Cable: Converts a standard 24-pin ATX PSU plug to a Dell 8-pin motherboard header; main trade-off: made for Dell boards; other 8-pin layouts are not listed.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Converts a standard 24-pin ATX PSU plug to a Dell 8-pin motherboard header
  • ✓ Listed as tested with OptiPlex 3020, 7020, 9020 and Precision T1700
  • ✓ 18AWG tin-coated copper wire, 1007 rated
  • ✓ Rated for up to 1000W maximum input
  • ✓ Lets you swap a Dell OEM PSU for an off-the-shelf ATX unit

Cons

  • ✗ Made for Dell boards; other 8-pin layouts are not listed
  • ✗ 30cm (11.8in) length can be tight in some case layouts
  • ✗ Compatibility list names specific models; verify your header first
  • ✗ Converts main board power only; CPU and drive power are separate

Manufacturer description

The URIMPAVIDO 24 Pin to 8-Pin ATX PSU adapter cable lets you run a standard ATX power supply on a Dell motherboard that uses an 8-pin main power header. If you're replacing a failed or underpowered OEM Dell power supply with an off-the-shelf unit, or moving an OptiPlex board into a new case, this cable connects the 24-pin plug on your PSU to the 8-pin socket on the board. The listing says it was tested with the Dell OptiPlex 3020, 7020 and 9020, the T1700 and Precision T1700, and boards built on H61, H81, Q77, Q87, B75, A75, Q75 and Q65 chipsets. Dell used different power connectors across…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for URIMPAVIDO 24 Pin to 8-Pin Power Supply ATX PSU Adapter Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Converts a standard 24-pin ATX PSU plug to a Dell 8-pin motherboard header"; the main trade-off is "Made for Dell boards; other 8-pin layouts are not listed". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this adapter work with a Dell OptiPlex 7020?

Yes. The manufacturer lists it as tested with the Dell OptiPlex 3020, 7020 and 9020, as well as the T1700 and Precision T1700.

Which motherboard chipsets is this cable compatible with?

The listing names Dell boards based on the H61, H81, Q77, Q87, B75, A75, Q75 and Q65 chipsets. Check that your board has the 8-pin main power header before you buy.

How long is the 24-pin to 8-pin cable?

The cable is 30cm (11.8 inches) long. Measure the route from your power supply to the motherboard header to make sure it reaches.

What is the maximum power this adapter can handle?

The manufacturer rates it for a maximum input of 1000 watts and says not to exceed that figure. The wiring is 1007-rated 18AWG tin-coated copper.

Can I use this adapter on a non-Dell motherboard?

It is designed for Dell motherboards that use an 8-pin main power connector, and the listing only names Dell systems and chipsets. For other brands, check the board's pinout with its manufacturer first.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • This power supply adapter cable converts standard 24pin ATX power supply cable to 8 pin power supply cable.
  • Tested and compatible with following systems:Dell Optiplex 3020,7020,9020,T1700,H61,H81,Q77,Q87,B75,A75,Q75,Q65 and Precision T1700.
  • Maximum Input Power:1000 Watts(DO NOT EXCEED)
  • Cable Length:30cm(11.8inch)
  • Made from high quality tin coated copper wire,material:1007-18AWG

Full Specifications

BrandURIMPAVIDO
ColorBlack
Gauge18
ModelEYEBOOT-24PINATX-ATXPSU-Dell
Wattage1000 watts
Cable TypeATX
Item ShapeRound
Model NameFBA_4330127289
Unit Count1 Count
Item Length30 centimeters
Part NumberFBA_4330127289
Cable Length30cm(11.8inch)
Connector TypeAtx
Number of Pins8
Outer MaterialOther
Maximum Voltage12 volts
Number of Items1
Special FeatureHeat Resistant, High Speed
Connector GenderMale-to-Male
Specification MetUL

Ready to buy?

24 Pin to 8-Pin Power Supply ATX PSU Adapter Cable for DELL Motherboards is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Power Supplies & Cables

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →