SOURCE ONE
Source One Premium Tilted Keyboard Stand for Ergonomic, Clear Acrylic (Full)
Bottom line: The Source One Premium Tilted Keyboard Stand for Ergonomic ($34.99 on Amazon as of 2026-10-07): Rises from 1/4 in at the front to 1-1/2 in at the rear for an even typing tilt; main trade-off: fixed slope with no adjustable height or angle settings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Rises from 1/4 in at the front to 1-1/2 in at the rear for an even typing tilt
- ✓ 17 in wide x 6 in deep platform fits full-size keyboards
- ✓ Clear acrylic blends into any desk setup without visual clutter
- ✓ Smooth rounded edges and polished finish, no sharp corners near wrists
- ✓ No legs, hinges or moving parts; the fixed slope stays consistent
Cons
- ✗ Fixed slope with no adjustable height or angle settings
- ✗ 6 in depth may not fit keyboards with an attached wrist rest
- ✗ Positive tilt only; no negative-tilt option
- ✗ Clear, polished acrylic shows dust and fingerprints easily
Manufacturer description
The Source One Premium Tilted Keyboard Stand raises the back of your keyboard for a steadier typing angle, without adding bulk to your desk. This clear acrylic keyboard stand measures 17 inches wide, 6 inches deep and 1-1/2 inches high. It slopes from 1-1/2 inches at the rear to 1/4 inch at the front, so your keyboard sits at a gentle, even incline instead of lying flat. A team of ergonomists in the USA designed the stand to reduce muscle strain and help cut down on typing mistakes. The 17-inch platform fits full-size keyboards, and because it's clear, it works with most desk setups without…
SpecPicks Verdict
SpecPicks scored Source One Premium Tilted Keyboard Stand for Ergonomic using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. SOURCE ONE's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What are the exact dimensions of the Source One keyboard stand?
It measures 17 inches wide, 6 inches deep and 1-1/2 inches high. It slopes from 1-1/2 inches at the rear to 1/4 inch at the front.
Will my full-size keyboard fit on this stand?
The platform is 17 inches wide and 6 inches deep, sized for full-size keyboards. Measure your keyboard's width and depth, including any attached wrist rest, to confirm it fits within that footprint.
Can I adjust the angle of the tilt?
No. The slope is fixed, rising from 1/4 inch at the front to 1-1/2 inches at the rear. There are no adjustable legs or hinges.
What material is the stand made from?
It is made of thick, clear acrylic with smooth rounded edges and a polished finish. Source One does not list the exact sheet thickness, so check the product listing if you need that figure.
Does the stand come with a warranty?
The product details provided do not state warranty terms. Check the product listing or contact Source One for current warranty coverage.
Key Features
- PRODUCT DIMENSIONS- This acrylic keyboard stand features a 1-1/2″ slope at the rear and 1/4″ at the front. The overall measurements are 17″ Wide x 1-1/2″ High x 6″ Deep
- MATERIAL- Sturdy clear acrylic durable for continued use, The clear premium thick acrylic will keep keyboards stable and looking great anywhere
- ERGONOMICS- Designed In the USA By a Team of World Class Ergonomists to minimize muscle strain as well as improve typing and reduce mistakes
- APPEARANCE- Smooth Rounded Edges. Polished Finish. Artfully Designed for Any Decor. Well Built & Durable
- SOURCE ONE- Premium supplier of all ergonomic office needs
Full Specifications
| Brand | SOURCE ONE |
|---|---|
| Color | clear |
| Material | Acrylic |
| Part Number | S1-KeyBoards |
| Model Number | S1-KeyBoards |
| Item Dimensions | 2.01 x 7.2 x 17.72 inches |
| Special Features | Ergonomic |
| Item dimensions L x W x H | 2.01 x 7.2 x 17.72 inches |
Ready to buy?
Source One Premium Tilted Keyboard Stand for Ergonomic, Clear Acrylic (Full) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Steam Deck OLED vs Legion Go S: 2026 Comparison
- Best Budget Sim Racing Wheel: Logitech G29 vs HORI vs Thrustmaster
- Asus ROG Harpe II Extreme Lands With a 65K-DPI Sensor
- Sound Blaster Live! Restoration Guide: Period-Correct Audigy FX Bridge for Win98 Builds
- Best GPU for ComfyUI and SDXL Under $350 — Why the RTX 3060 12GB Still Wins
- GPT-5.6 Sol Reportedly Cracks a 30-Year Statistics Conjecture in 90 Minutes
- Raspberry Pi AI Module in 2026: Can a Pi + Hailo Run Local LLMs?
- Budget 4K QD-Mini LED Gaming Monitors Hit New Lows in 2026
- PiKVM Hardware Requirements: The Real 2026 Guide
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe Boot Drive
- Bigme Color E-Ink Monitor: 60 FPS and 4096 Colors Explained
- GameSir G7 SE vs 8BitDo Pro 2 for PC Gaming: Wired Precision vs Wireless Flexibility
- pxpipe Cuts Claude Code Token Costs Up to 70%: How It Works, When to Go Local
- RX 9060 XT vs RX 9070 XT: OLED 1440p or 4K IPS?
- Crucial BX500 vs Samsung 870 EVO for Budget & Retro Builds
- Best Hardware for a Home Game Server in 2026
- Best Streaming Kit for Beginners in 2026: Mic, Cam, and Lights
- Build a Raspberry Pi Retro Handheld in 2026: Parts and Setup
- Build a Low-Power Jellyfin Server on a Raspberry Pi 4 8GB in 2026
- Period-Correct Sound for a Modern Retro PC: The Sound Blaster G6 and the EAX Legacy
- Windows 98 vs Windows 2000 for a GeForce-Era Retro Gaming Build
- Best Gaming Mice for Competitive FPS in 2026
- Ryzen AI Max+ 395 LLM Inference: Specs, Bandwidth, Reality
- Inkling's 975B Open-Weight Speech Model — and the 12GB Rig That Transcribes Free
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090