Skip to main content
ALITOVE WS2811 RGB LED Pixels Light Individually Addressable 12mm Diffused Full Color Bullet Pixels DC 5V IP68 Waterproof 500pcs for Outdoor LED Screen Billboard House Halloween Christmas Decor
ALITOVE

ALITOVE WS2811 RGB LED Pixels Light Individually Addressable 12mm Diffused Full Color Bullet Pixels DC 5V IP68 Waterproof 500pcs for Outdoor LED Screen Billboard House Halloween Christmas Decor

Bottom line: The ALITOVE WS2811 RGB LED Pixels Light Individually Addressable 12mm ($103.19 on Amazon as of 2026-11-22 05:19 UTC): Every pixel is addressable: 24-bit color and 256 brightness levels each; main trade-off: JST-SM connectors are not waterproof and need sealing outdoors.

$103.19 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Every pixel is addressable: 24-bit color and 256 brightness levels each
  • ✓ IP68 silicone-sealed housing rated for outdoor and underwater use
  • ✓ Cold- and UV-resistant rubber wire built for long seasonal outdoor runs
  • ✓ Power and ground leads on both ends make power injection simple
  • ✓ Works with Arduino, Raspberry Pi, SP-series Bluetooth and WiFi controllers

Cons

  • ✗ JST-SM connectors are not waterproof and need sealing outdoors
  • ✗ 5V supply means voltage drop on long chains; plan for power injection
  • ✗ Needs a separate WS2811 controller or microcontroller to run
  • ✗ WS2811 uses a single data line, so one failed pixel can cut the chain

Manufacturer description

The ALITOVE WS2811 RGB LED pixels give you 500 individually addressable 12mm diffused bullet lights, wired in strings of 50, for projects where every point of light needs its own color. Each F8 RGB LED pairs with a WS2811 smart IC, so you can set the color and brightness of every pixel separately. You get 256 brightness levels and 24-bit color, which works out to 16,777,216 possible colors. The pixels run on DC 5V. Every component is sealed in silicone for an IP68 rating, and the rubber wiring resists cold and UV, so these lights can stay outdoors through snow and rain or even go underwater…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for ALITOVE WS2811 RGB LED Pixels Light Individually Addressable 12mm…, so this read rests on the manufacturer's listed specs and the current price in the rgb & lighting category (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "Every pixel is addressable: 24-bit color and 256 brightness levels each"; the main trade-off is "JST-SM connectors are not waterproof and need sealing outdoors". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many lights are in the ALITOVE 500pcs pack and how are they grouped?

The pack contains 500 WS2811 pixels, with 50 pixels per string. Each string has 3-pin JST-SM connectors on both ends, so you can chain strings together into longer runs.

Can I control these pixels with an Arduino or Raspberry Pi?

Yes. ALITOVE lists Arduino and Raspberry Pi as compatible. They also list T1000S and K1000C controllers, SP105E, SP107E, SP110E and SP611E Bluetooth controllers, the SP108E WiFi controller, and any other WS2811 SPI controller.

Are these LED pixels safe to leave outside all winter?

The pixels are rated IP68, with every component sealed in silicone, and the wire is cold- and UV-resistant rubber. However, ALITOVE notes that the JST connectors are not waterproof. Seal or shelter each connection point before you install them outdoors.

What voltage do the ALITOVE WS2811 pixels need?

They run on DC 5V. Each string has separate power and ground wires on both ends, so you can inject power partway along long chains to prevent voltage drop and color shift at the far end.

Can I cut the string to a shorter length?

Yes. You can cut between any two pixels, so you can shorten a string to fit your layout. You can also splice strings together to extend a run.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【Individually addressable LED 】 This is digitally-addressable WS2811 LED pixel string lights. Per string has 50pcs F8 RGB LED chips and WS2811 smart IC. You can set the color of each LED and their brightness individually! 256-level brightness and 24-bit color display, achieve 16777216 colors full color display.
  • 【IP68 waterproof and Durable】 We sealed all the components in a housing with silicone, making its waterproof grade reach IP68. The wires are made of cold-resistant, UV-resistant rubber. Superior materials and design enables it to withstand extreme bad weather such as snowstorm, rainstorm, etc, suitable for long-term outdoor and underwater use.
  • 【Easily connect and cut】 It comes with 3pin JST-SM connectors and separate power/ground wires on both ends. You can hook up multiple strips together to make it longer and inject power in case of voltage drops. Each pixel can be cut off. So you can shorten or extend the distance, great for DIY lighting projects.(Please note that JST connectors are not waterproof)
  • 【Compatible with many controllers】 It can be programmed with Arduino, Raspberry Pi, T1000S, K1000C controllers and controlled by ALT-C01, SP105E Bluetooth controllers, SP107E SP601E SP602E P608E SP611E SP110E Bluetooth music controllers, SP108E WiFi controllers, SP103E mini RF controllers and any other WS2811 SPI controllers.
  • 【Wide Application】 Thanks to the excellent waterproof design, it is widely used in various indoor and outdoor commercial lighting decoration projects, such as outdoor billboards, LED screens, LED wall, hotel, KTV, bars, city skyline, building outline decoration and so on.

Full Specifications

BrandALITOVE
ColorRGB (Red, Green, Blue)
StyleModern
ThemeOutdoor
SeasonsChristmas, All Seasons
Voltage5 Volts (DC)
Wattage150 watts
OccasionChristmas
Unit Count500 Count
Form FactorString Lights
Item Length40 Meters
Light ColorMulticolor
ConnectivityBluetooth, WiFi
Model NumberWS2811-5V-BK
Power SourceCorded Electric
Material TypeSilicone
Product StyleModern
Control MethodTouch
Controller TypeVoice Control
Item Dimensions1574.8 x 6.3 x 7.48 inches

Ready to buy?

ALITOVE WS2811 RGB LED Pixels Light Individually Addressable 12mm Diffused Full Color Bullet Pixels DC 5V IP68 Waterproof 500pcs for Outdoor LED Screen Billboard House Halloween Christmas Decor is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $103.19

*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →