Skip to main content
NASSAU ELECTRICAL SUPPLY 80' Aluminum URD Dyke 2-2-2-4 Cable Direct Burial Quadruplex Secondary Wire
Nassau Electrical Supply

NASSAU ELECTRICAL SUPPLY 80' Aluminum URD Dyke 2-2-2-4 Cable Direct Burial Quadruplex Secondary Wire

Bottom line: The NASSAU ELECTRICAL SUPPLY 80' Aluminum URD Dyke 2-2-2-4 Cable Direct: Three 2 AWG phase conductors plus a 4 AWG neutral in one twisted bundle; main trade-off: rating drops to 115 A in duct, about 26% below the direct-burial figure.

Live pricing on eBay

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Three 2 AWG phase conductors plus a 4 AWG neutral in one twisted bundle
  • ✓ Rated 155 A ampacity when direct buried
  • ✓ URD design with 60-mil insulation lets you bury it without conduit
  • ✓ About 29 lbs for 80 ft (367 lbs per 1,000 ft)
  • ✓ 7-strand conductors bend more easily than solid wire during routing

Cons

  • ✗ Rating drops to 115 A in duct, about 26% below the direct-burial figure
  • ✗ Aluminum conductors need AL-rated lugs, breakers and connectors
  • ✗ 0.973-inch O.D. needs large conduit for any sleeved section
  • ✗ Fixed 80 ft length; longer runs need a splice or a second length

Manufacturer description

The Nassau Electrical Supply 80' Dyke 2-2-2-4 URD cable is an aluminum quadruplex secondary wire made for direct burial. The bundle twists three 2 AWG phase conductors and a 4 AWG neutral together, so you pull one assembly instead of four separate wires. Each phase conductor uses 7-strand construction. The insulation is 60 mils thick. Each phase conductor measures 0.403 inches across, and the full cable has a 0.973-inch outside diameter. The rated ampacity is 155 amps for direct burial and 115 amps in duct. Choose your installation method before you size the run, because the in-duct rating…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for NASSAU ELECTRICAL SUPPLY 80' Aluminum URD Dyke 2-2-2-4 Cable Direct…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Three 2 AWG phase conductors plus a 4 AWG neutral in one twisted bundle"; the main trade-off is "Rating drops to 115 A in duct, about 26% below the direct-burial figure". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

What does 2-2-2-4 mean on this URD cable?

It means three 2 AWG aluminum phase conductors and one 4 AWG neutral. Each phase conductor is 7-strand with 60-mil insulation, and all four are twisted together as a quadruplex.

How many amps can this 2-2-2-4 aluminum cable carry?

The listed ampacity is 155 amps for direct burial and 115 amps in duct. Your local electrical code and the ratings of your terminations determine the final breaker size.

Can I bury this wire directly without conduit?

Yes. It is URD (underground residential distribution) cable sold for direct burial. Required burial depth and any conduit for sections that rise above ground depend on local code, so check with your inspector or electrician.

How thick and heavy is the 80 ft roll?

The cable has a 0.973-inch outside diameter, and each phase conductor is 0.403 inches across. At 367 lbs per 1,000 feet, the 80-foot length weighs about 29 lbs.

Will this aluminum cable work with my panel and breakers?

Only if the lugs and breakers are rated for aluminum conductors (marked AL or AL/CU). Check the labels on your equipment, and follow the connector manufacturer's instructions for torque and anti-oxidant compound.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Size AWG: 2
  • Stranding: 7
  • Insulation Thickness (mils): 60
  • Neutral Size AWG: 4
  • Single Phase Conductor Inches: 0.403
  • O.D. Inches: 0.973

Full Specifications

BrandNassau Electrical Supply
Colorblack
Strands7
Voltage600 volts
AmpacityDirect burial: 155 Amps
MaterialAluminum
Size AWG2
Stranding7
Unit Count80 Feet
O.D. Inches0.973
Part NumberAluminum URD1
Material TypeAluminum
Maximum Current155 A
Number Of Wires4
Neutral Size AWG4
Weight lbs./1000ft367 lbs
Number of Cable Strands7
Insulation Thickness (mils)60
Single Phase Conductor Inches0.403

Ready to buy?

NASSAU ELECTRICAL SUPPLY 80' Aluminum URD Dyke 2-2-2-4 Cable Direct Burial Quadruplex Secondary Wire is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

See live eBay listings → Check Amazon listing →

Related Power Supplies & Cables

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →