Skip to main content
iUniker Raspberry Pi 3B+ Case - Transparent with Heatsink - Access to All Ports
iUniker

iUniker Raspberry Pi 3B+ Case - Transparent with Heatsink - Access to All Ports

Bottom line: The iUniker Raspberry Pi 3B+ Case: Clear ABS shell keeps board and status LEDs visible without opening the case; main trade-off: raspberry Pi board is not included in the package.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar single board computers

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Clear ABS shell keeps board and status LEDs visible without opening the case
  • ✓ Ships with 2 heatsinks and a screw set, so no separate thermal kit needed
  • ✓ Snap-together assembly around the board, minimal tooling required
  • ✓ Cutouts leave GPIO, USB, Ethernet, HDMI, and power all accessible
  • ✓ Wall mountable, plus 4 rubber feet for desk use

Cons

  • ✗ Raspberry Pi board is not included in the package
  • ✗ Fits only Pi 3B+, 3B, and 2B, not Pi 4, 5, or Zero
  • ✗ Passive heatsinks only, no fan for sustained heavy loads
  • ✗ ABS plastic scratches and fingerprints more visibly than opaque cases

Manufacturer description

The transparent body keeps your board and its status LEDs visible, so you can spot activity at a glance instead of guessing what the Pi is doing. Assembly is tool-light: the shell snaps together around the board, and the included screw set locks it down once you have it seated. Every port stays reachable, including GPIO, USB, Ethernet, HDMI, and the power input, so you can keep HATs, sensors, and displays wired while the case stays closed. Two heatsinks ship in the box to help pull heat off the SoC during longer workloads, and four rubber feet keep the unit from sliding across a desk. If you…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored iUniker Raspberry Pi 3B+ Case using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. iUniker's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Which Raspberry Pi models does this case fit?

It is designed for the Raspberry Pi 3 Model B+, 3B, and 2B. It is not listed as compatible with the Pi 4, Pi 5, or Pi Zero form factors.

Does the Raspberry Pi come with the case?

No. The Raspberry Pi is not included. The package contains 1 case, 1 screw set, 2 heatsinks, and 4 rubber bases.

Can I reach the GPIO pins and ports with the case closed?

Yes. iUniker designs this shell for access to all ports, including GPIO, so you can keep HATs and cables connected without removing the case.

Are heatsinks included or do I buy them separately?

Two heatsinks are included in the box, so you do not need a separate thermal kit to get basic passive cooling on the board.

Is this case any good, based on buyer feedback?

Buyer feedback is best judged on the current listing. It is a budget-friendly option among Pi enclosures in this category.

Key Features

  • This is a Very Nice Looking Clear Protective case designed specifically for the Raspberry Pi 3 Model B+, 3B, 2B
  • The case is a made of ABS that snaps together around the Raspberry Pi
  • It provides the best available protection/accessibility for the Raspberry Pi
  • Wall Mountable. Access to All ports. For New Raspberry Pi 3 b+
  • Raspberry Pi is not included, Comes with 2pcs Heatsink

Full Specifications

BrandiUniker
ColorClear
Fan Size12 centimeters
MaterialAcrylonitrile Butadiene Styrene (ABS)
Case TypeRaspberry Pi
Model NameRaspberry Pi 3 b+
Model NumberIU-RP-047
Cooling MethodConductive
Mfr Part NumberIU-RP-047
Number of Items1
Total Usb Ports2
Compatible DevicesRaspberry Pi 3 b+, 3B, 2B
Enclosure MaterialAcrylonitrile Butadiene Styrene (ABS)
Total USB 2.0 Ports2
Supported MotherboardMini ITX
Motherboard CompatabilityMini ITX
Power Supply Mounting TypeBottom Mount
Other Special Features of the ProductWall Mountable, Access to All Ports, Enhanced Cooling with Heatsink

Ready to buy?

iUniker Raspberry Pi 3B+ Case - Transparent with Heatsink - Access to All Ports is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Single Board Computers

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
iUniker Raspberry Pi 3B+ Case - Transparent with Heatsink - Access to All Ports
View on Amazon →