MakerSpot
MakerSpot Micro USB OTG Hub
Bottom line: The MakerSpot Micro USB OTG Hub ($7.99 on Amazon as of 2026-10-21 04:14 UTC): Turns a Pi Zero's single micro USB OTG port into 4 USB 2.0 ports; main trade-off: bus-powered only; device current is capped by the host's OTG port.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Turns a Pi Zero's single micro USB OTG port into 4 USB 2.0 ports
- ✓ No drivers or external power needed on Android or USB 2.0 PCs
- ✓ Also lists Orange Pi, ODROID, Banana Pi and older Galaxy phones
- ✓ Connects a keyboard, mouse, flash drive, camera or printer
Cons
- ✗ Bus-powered only; device current is capped by the host's OTG port
- ✗ USB 2.0 tops out at 480 Mbps, shared across all 4 ports
- ✗ No external power input for hard drives or other high-draw devices
- ✗ Listed phone support centers on older Samsung and Sony models
Manufacturer description
The MakerSpot Micro USB OTG Hub gives a Raspberry Pi Zero four full-size USB 2.0 ports through its single micro USB OTG connector. Plug it in and you can attach a keyboard, mouse, flash drive, camera or printer to a board that normally has room for one device. The hub is built for the Raspberry Pi Zero v1.3 (the version with the camera connector) and the Pi Zero W (with Wi-Fi and Bluetooth). The listing also names Orange Pi, ODROID and Banana Pi boards. It works with Android as well: MakerSpot lists older Samsung Galaxy phones and tablets (S2, S3/S4, Note, Tab3 8.0) and Sony Xperia and…
SpecPicks Verdict
SpecPicks scored MakerSpot Micro USB OTG Hub using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. MakerSpot's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does this hub work with the Raspberry Pi Zero W?
Yes. MakerSpot lists the Raspberry Pi Zero v1.3 (with camera connector) and the Pi Zero W (with Wi-Fi and Bluetooth). It plugs into the Zero's micro USB OTG port and gives you 4 USB 2.0 ports.
Do I need a separate power supply for the hub?
No. The hub draws power only from the OTG port it's plugged into. That means the current available to your USB devices depends on what the host can supply, so low-draw devices like keyboards, mice and flash drives work best.
Can I plug in a keyboard and mouse at the same time?
Yes. The hub offers 4 USB 2.0 ports, and MakerSpot lists a mouse, keyboard, USB flash drive, camera and printer as supported devices. Because power is shared from the host's OTG port, avoid combining several high-draw devices.
Will it work with my Android phone or tablet?
It is plug and play with no driver needed on Android. The listing names Samsung Galaxy S2, S3/S4, Note and Galaxy Tab3 8.0, plus several Sony Xperia and S-series tablets. For other devices, confirm that your phone supports USB OTG host mode and has a micro USB port.
How fast is the MakerSpot OTG hub?
It is a USB 2.0 hub supporting 480 Mbps high speed, 12 Mbps full speed and 1.5 Mbps low speed. All 4 ports share that bandwidth through one upstream connection.
Key Features
- Expands into 4 USB Ports for Raspberry Pi Zero v1.3 (with camera connector) and W (with Bluetooth and Wifii), Orange Pi, ODROID, Banana Pi
- Compatible with Samsung Galaxy S2, Samsung Galaxy Note, Samsung Galaxy S3/S4, Galaxy Tab3 8.0, Sony Xperla NX-02D, Sony Xperla acro HDIS12S.Toshiba REGZA Phone-TO1D, and Sony S-series Tablet.
- Draws power only from OTG port, current for USB devices is limited to host capability
- With USB2.0 4-Port Hub, for Mouse, Keyboard, U disk, Camera, Printer and so on. Easy plug and play installation device, no external power needed No driver needed for Android and PC with USB 2.0 port Transfer Rate: USB2.0, 480/12Mbps, 1.5Mbps
Full Specifications
| Brand | MakerSpot |
|---|---|
| Color | Black, Silver |
| Connectivity | Bluetooth, USB, WiFi |
| Compatibility | PC, Android, Linux |
| Special Feature | Play, Plug |
| Compatible Devices | Desktops, Keyboards, Mouse, Printers, Smartphones, Tablets |
| Hardware Interface | Bluetooth, USB, USB 2.0 |
| Full listing title | Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux |
Ready to buy?
Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Single Board Computers
Micro USB OTG Hub for Raspberry Pi Zero 4 Port… head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- GameNative Unlocks Up to 100 FPS PC Gaming on Android
- Is vLLM Worth It If You're Not Serving Other Users?
- Handheld Gaming PCs Ranked: 2025's Top Picks Compared
- Intel Arc B60 Stable Diffusion: Setup & Benchmarks 2025
- 2000s LAN Party, Modern Build: Period-Correct Hardware That Still Boots in 2026
- ProgramBench: Can LLMs Rebuild Programs From Scratch?
- Best AMD CPUs for Gaming in 2026: Top Ryzen Picks
- Samsung 870 EVO vs WD Blue SN550: Best Storage for Forza Horizon 6 Fast Loading
- Audigy 2 ZS Won't Detect in Win98 SE: A Troubleshooting Decision Tree
- Ryzen 7 5800X vs Core i7-9700K: Best Budget 1080p Gaming CPU in 2026
- Intel Arc LLM Performance: A770, B580 & Pro B60 Guide 2025
- Black Friday Monitor Deals 2026: 5 Picks for Gaming and AI Desks
- Best Budget Gaming Setup Essentials for 2026: Mouse, Keyboard, Headset, Mic & Mousepad
- Pentium 4 + Radeon 9700 Pro Windows XP Build in 2026
- Best AM4 Upgrade Parts Under $100 Each in 2026
- Ollama vs LM Studio vs GPT4All on a 12GB GPU (2026)
- Best GPU for Gemma 3 27B in 2026: Where 12 GB Stops Being Enough
- How to run Llama 3.1 70B on Apple M4 Pro
- RetroPie Handheld 3D Print Guide: Cases, Settings & Parts
- Running Local LLMs on a Raspberry Pi 5 in 2026: What Works, What Doesn't
- CompactFlash + IDE Storage for a Period-Correct Windows 98 Build
- Best PlayStation 5 Controllers in 2026: 5 Picks for Every Player
- GameSir G7 SE vs DualSense: Which Controller Is Better on PC in 2026?
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090