Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24" X 48" (2'x 4')
Bottom line: Per its Amazon listing, the Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24" X 48": top layer Static-“Dissipative Layer” ( 0.5mm thickness ); bottom Layer Conductive layer (1.5mm thickness).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Top layer Static-“Dissipative Layer” ( 0.5mm thickness )
- ✓ Backed by Scientific Americas's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
24" X 48'' With 2 MM Thickness, Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance. Feature two layers rubber; the top layer is dissipative and the bottom layer is conductive. Available in Gray. Dual Bench Ground Mount for Single Conductor Wrist Straps. This is a good complement to our mat grounding cord as it will install under the work bench and provide long term solution. It also provides more workable surface area ( the mat grounding usually is mounted on the corner, top left or right of the mat).
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24" X 48", so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance
- Top layer Static-“Dissipative Layer” ( 0.5mm thickness )
- Bottom Layer Conductive layer (1.5mm thickness)
- Resistance: RTT:3.8 x 10^6 to 1 x 10^8, RTG:2.4 x 10^7 to 1x 10^8, Surface:<10^4 to <10^7
- Heat resistance (600oF, 10 sec no smell, no melt)
Full Specifications
| Brand | Scientific Americas |
|---|---|
| Color | Gray |
| Display | lcd or led |
| Resistance | RTT:3.8 x 10^6 to 1 x 10^8, RTG:2.4 x 10^7 to 1x 10^8, Surface:<10^4 to <10^7 |
| Display Type | lcd or led |
| Number of Channels | 1 |
| Included Components | Grounding Cord, Mat |
| Temperature Stability | 600 degrees_fahrenheit |
| Manufacturer Part Number | 2050-24X48RB |
| Full listing title | Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24" X 48" (2'x 4') - 0.08" Thick- with Dual Bench and Wrist Strap-Gray |
Ready to buy?
Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24" X 48" (2'x 4') - 0.08" Thick- with Dual Bench and Wrist Strap-Gray is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best CPU for a Budget AI + Gaming Rig: Ryzen 7 5700X vs 5800X vs 5600G
- RTX 5090 AI Cores: What the Specs Actually Mean in 2026
- Self-Hosting DeepSeek on an RTX 3060 12GB: What Fits in 2026
- RTX 5060 8GB vs RTX 4070 12GB for Qwen3 14B: Does 8GB Fit? (2026)
- 9800X3D vs Core Ultra 9 285K — gaming vs productivity
- Raspberry Pi 4 8GB vs Pi 5 vs Mini-PC for Local LLMs
- Horse Riding Game Controller for PC/Mac: Buy or Build
- Best Budget PC Upgrades for 1440p Gaming in 2026
- Best Budget 4K Gaming Monitor Under $400 in 2026: SANSUI vs KOORUI Mini-LED
- Best CPU for Streaming and Gaming on a Single PC in 2026
- Local LLMs on the Ryzen 5 5600G: llama.cpp CPU Inference Numbers
- Best Mechanical Keyboard for Office and Hybrid Coding in 2026
- USB Wi-Fi 6 vs PCIe Wi-Fi 6E: Which Actually Fixes Gaming Lag?
- Intel Arc for Stable Diffusion: ComfyUI + A1111 setup (2026)
- Intel Arc AI Training in 2026: What Workloads Actually Work
- Intel Plans Two 22-Core Nova Lake-S SKUs With Game-Boosting Cache
- Prime Intellect Raises $130M to Help Enterprises Build Their Own AI Agents
- ComfyUI on an RTX 3060 12GB: Flux and SDXL Speeds in 2026
- Run a Local Coding Agent on an RTX 3060 12GB (After Codex Went Autonomous)
- Ex-Sega Engineer Builds a 'Super-Realistic' CRT Emulator
- pxpipe Cuts Claude Code Token Costs Up to 70%: How It Works, When to Go Local
- Local LLM Inference on the RTX 3060 12GB: 2026 Quantization Playbook
- Local LLM Image Generators: Best AMD GPUs in 2025
- Raspberry Pi Locator Website to Shut Down in July 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090