Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24" X 60" (2'x 5')
Bottom line: Per its Amazon listing, the Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24" X 60": top layer Static-“Dissipative Layer” ( 0.5mm thickness ); bottom Layer Conductive layer (1.5mm thickness).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Top layer Static-“Dissipative Layer” ( 0.5mm thickness )
- ✓ Backed by Scientific Americas's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
24" X 60'' With 2 MM Thickness, Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance. Feature two layers rubber; the top layer is dissipative and the bottom layer is conductive. Available in Blue. Dual Bench Ground Mount for Single Conductor Wrist Straps. This is a good complement to our mat grounding cord as it will install under the work bench and provide long term solution. It also provides more workable surface area ( the mat grounding usually is mounted on the corner, top left or right of the mat).
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24" X 60", so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance
- Top layer Static-“Dissipative Layer” ( 0.5mm thickness )
- Bottom Layer Conductive layer (1.5mm thickness)
- Resistance: RTT:3.8 x 10^6 to 1 x 10^8, RTG:2.4 x 10^7 to 1x 10^8, Surface:<10^4 to <10^7
- Heat resistance (600oF, 10 sec no smell, no melt)
Full Specifications
| Brand | Scientific Americas |
|---|---|
| Color | Blue |
| Display | lcd or led |
| Resistance | RTT:3.8 x 10^6 to 1 x 10^8, RTG:2.4 x 10^7 to 1x 10^8, Surface:<10^4 to <10^7 |
| Display Type | lcd or led |
| Number of Channels | 1 |
| Included Components | Grounding Cord, Mat |
| Temperature Stability | 600 degrees_fahrenheit |
| Manufacturer Part Number | 2050-24X60BB |
| Full listing title | Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24" X 60" (2'x 5') - 0.08" Thick- with Dual Bench and Wrist Strap-Blue |
Ready to buy?
Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24" X 60" (2'x 5') - 0.08" Thick- with Dual Bench and Wrist Strap-Blue is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best Webcam for Streaming and Remote Work in 2026
- AIO vs Air on a Ryzen 7 5800X: Corsair ML240L vs Noctua NH-U12S
- Why Preassembled PCs Beat DIY Builds in 2026
- RTX 5090 vs RX 7900 XTX — does AMD still matter?
- Best Streaming Webcam and Mic Setup Under $300 (2026)
- Build a Raspberry Pi 4 8GB RetroPie Emulation Station in 2026
- Ryzen 7 5700X vs 5800X for a 2026 Gaming Build: Which AM4 Chip Wins?
- Arc Pro B60 Dual 48GB vs Dual RTX 3060 12GB for 70B Local LLMs (2026)
- Ryzen 5 5600G vs Ryzen 7 5700X for 1080p Gaming
- Best CPU for a Budget AI + Gaming Rig: Ryzen 7 5700X vs 5800X vs 5600G
- How to run Qwen 3 14B on Arc B580
- Best Budget SSD for a Gaming PC in 2026: Crucial BX500 vs SanDisk vs Samsung 970 EVO Plus
- VibeThinker-3B: A 3B Reasoning Model That Fits Any 12GB GPU
- Build a Silent Windows 98 Boot Drive with CompactFlash + IDE
- Best Gaming CPU for 1440p Builds in 2026
- Claude Opus 4.8 Ships, Tops GPT-5.5 on Intelligence Index
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5080
- Best Budget Gaming Mouse + Mousepad Combo Under $80 in 2026
- AMD Ryzen AI Halo: Pre-Orders Open for Linux Developers
- GLM-5.2 vs Claude Opus 4.7: Open-Weights Value on Local GPUs
- Jetson Orin Nano Super for Local LLM: 7B/13B Tokens-per-Second Reality Check
- Inside the Intel 8087: Decapping a 1980 Math Coprocessor's Microcode
- Best Game Controllers for PC and Emulation in 2026
- Best GPU for 1080p High-Refresh Esports 2026: RTX 3060 12GB
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090