Three Layer Dissipative Vinyl Anti-Static ESD Mat -30" X 48" (2.5'x 4')
Bottom line: The Three Layer Dissipative Vinyl Anti-Static ESD Mat -30" X 48" is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
30" X 48'' Vinyl Mat. Feature a three layer design, 0.125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide. It is compatible for use with continuous monitors. Meets the ESD work surface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1. The top layer is made of durable vinyl and it is suited for use as an ESD protective bench mat or tray mat. Its highly conductive Carbon middle layer provides a Quick discharge path to ground. The cushioned dissipative bottom layer provides excellent protection against physical damage…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Three Layer Dissipative Vinyl Anti-Static ESD Mat -30" X 48", so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Feature a three layer design, 0.125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide. It is compatible for use with continuous monitors. Meets the ESD work surface.
- Construction: Heat fused vinyl composite,Thickness: 0.125" (3.2mm) , Hardness: 45 Shore “A”, per ASTM-D412
- Tensile Strength: Greater than 300 PSI, per ASTM-D412, Tear Strength: Greater than 80 lbs/inch, per ASTM-D624
- Abrasion Resistance: Greater than 750 cycles, per Tabor-CS17 , Heat Resistance: -20°F to 140°F continuous
- Resistance to degradation by inorganic acids, organic acids, reducing agents, Aliphatic hydrocarbons, mineral oil, aldehydes, and amines
Full Specifications
| Brand | Scientific Americas |
|---|---|
| Color | Gray |
| Construction | Heat fused vinyl composite,Thickness: 0.125" (3.2mm) , Hardness: 45 Shore “A”, per ASTM-D412 |
| Special Features | Cushioned, Durable |
| Tensile Strength | Greater than 300 PSI, per ASTM-D412, Tear Strength: Greater than 80 lbs/inch, per ASTM-D624 |
| Abrasion Resistance | Greater than 750 cycles, per Tabor-CS17 , Heat Resistance: -20°F to 140°F continuous |
| Manufacturer Part Number | 2080-30X48RP |
| Full listing title | Three Layer Dissipative Vinyl Anti-Static ESD Mat -30" X 48" (2.5'x 4') - 0.125" Thick- with Dual Point and Wrist Strap-Gray |
Ready to buy?
Three Layer Dissipative Vinyl Anti-Static ESD Mat -30" X 48" (2.5'x 4') - 0.125" Thick- with Dual Point and Wrist Strap-Gray is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Why Cheap Monitors Use HDMI Instead of DisplayPort
- IPEX-LLM + Ollama in Docker: Running Local Models on Intel GPUs
- CUDA 13.3 and the RTX 3060: What Changes for Local LLM Inference
- Best Gaming CPU for 1080p and 1440p Builds in 2026
- What Is Mistral AI? The OpenAI Rival Explained (2026)
- AMD Ryzen AI Max 400 'Gorgon Halo': 192GB Unified Memory for Local LLMs
- Best Raspberry Pi Starter Kits for Beginners (2026)
- Best CompactFlash and SATA/IDE Adapter for a Retro PC Boot Drive in 2026
- Best Budget SATA SSD in 2026: BX500 vs SanDisk Plus vs WD Blue
- Athlon 64 + Radeon 9800 Pro Windows XP Build (2026 Revival): CompactFlash-to-IDE Boot Guide
- Raspberry Pi Zero W vs Pi 4 for a 2026 Cyberdeck: Which Board Fits?
- Gunnir Arc B580 vs RTX 5090D on DeepSeek: The Budget AI-Rig Upset Explained
- Crucial BX500 vs Samsung 870 EVO vs SanDisk SSD Plus: Best Budget SATA SSD
- xAI Open-Sources Grok-Build: Can You Run It Locally?
- Samsung Unveils World's First 4K 360Hz QD-OLED Panel
- Best Mouse and Mousepad for FPS in 2026: G502 Hero + SteelSeries QcK
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5070
- Best Budget 4K Monitor for an RTX 3060 Build in 2026: SANSUI vs KOORUI vs ASUS TUF
- Strix Halo Gaming Benchmarks: What AMD's APU Can Really Do
- ASUS TUF 27" 1440p vs Samsung Odyssey G5 32": Best High-Refresh Esports Monitor
- Best CompactFlash to IDE Adapter for Win98 SE Builds in 2026
- Best PC Game Controller in 2026
- Qwen 3.6 27B vs DeepSeek V4: Which Local Model Wins on a Single 5090?
- Open WebUI + Ollama on an RTX 3060: The Self-Hosted ChatGPT Alternative for 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090