ESD Mat with a Grounding Cord, Three Layer Vinyl, 36" X 72" (3' Wide x 6' Long x 0.125" Thick), Blue
Bottom line: The Scientific Americas ESD Mat with a Grounding Cord is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
36" X 72'' Vinyl Mat. Feature a three layer design, 0.125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide. It is compatible for use with continuous monitors. Meets the ESD work surface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1. The top layer is made of durable vinyl and it is suited for use as an ESD protective bench mat or tray mat. Its highly conductive Carbon middle layer provides a Quick discharge path to ground. The cushioned dissipative bottom layer provides excellent protection against physical damage…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Scientific Americas ESD Mat with a Grounding Cord, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Feature a three layer design, 0.125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide. It is compatible for use with continuous monitors. Meets the ESD work surface.
- Construction: Heat fused vinyl composite,Thickness: 0.125" (3.2mm) , Hardness: 45 Shore “A”, per ASTM-D412
- Tensile Strength: Greater than 300 PSI, per ASTM-D412, Tear Strength: Greater than 80 lbs/inch, per ASTM-D624
- Abrasion Resistance: Greater than 750 cycles, per Tabor-CS17 , Heat Resistance: -20°F to 140°F continuous
- Resistance to degradation by inorganic acids, organic acids, reducing agents, Aliphatic hydrocarbons, mineral oil, aldehydes, and amines
Full Specifications
| Brand | Scientific Americas |
|---|---|
| Construction | Heat fused vinyl composite,Thickness: 0.125" (3.2mm) , Hardness: 45 Shore “A”, per ASTM-D412 |
| Special Features | Cushioned, Durable |
| Tensile Strength | Greater than 300 PSI, per ASTM-D412, Tear Strength: Greater than 80 lbs/inch, per ASTM-D624 |
| Abrasion Resistance | Greater than 750 cycles, per Tabor-CS17 , Heat Resistance: -20°F to 140°F continuous |
| Manufacturer Part Number | 2080-36X72B |
Ready to buy?
ESD Mat with a Grounding Cord, Three Layer Vinyl, 36" X 72" (3' Wide x 6' Long x 0.125" Thick), Blue is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- DeepSeek V4 Pro Local Inference: Hardware Requirements and Cost-Per-Million-Tokens vs API
- Best CPU Coolers for AMD Ryzen 5000 (AM4) in 2026
- Best CPU for Streaming and Gaming on a Single PC in 2026
- CRT vs Monitor for Retro Gaming: Which Wins in 2026
- Intel's llm-scaler-vLLM 1.4 Adds Arc Pro B70: A Cheaper Local-Inference Path?
- Qwen 3.6 35B-A3B-MTP on a GTX 1060 6GB: How Far Can Old GPUs Still Go?
- Samsung 256GB microSD Drops to $47.99 — 40% Off Storage Deal
- Best Gaming SSD in 2026: 5 Picks for PS5, Steam Deck, and Custom Builds
- HyperX QuadCast 2 vs Blue Yeti: Best Streaming Mic in 2026
- One Monitor, Two PCs: Monitor KVM vs Dual-Input for a Gaming Rig and AI Box
- ASRock Arc B580 12GB vs RTX 3060 12GB for 1440p Gaming in 2026
- Best Controller for RetroPie & Pi Emulation: SN30 Pro vs DualSense
- Best DualSense and PC-Compatible Controller (2026)
- Forza Horizon 6 PC Benchmarks: What GPU Hits 60 FPS at 1440p?
- Best Budget Build for Local LLMs in 2026: How Far a Ryzen 5 5600G + RTX 3060 Gets You
- Adding USB Audio to a Retro Windows XP Gaming PC: Sound BlasterX G6
- Best CPU Cooler for 2026: 5 Picks for Air, AIO, and Silent Builds
- AMD Ryzen AI Max+ 'Gorgon Halo' 192GB: What 192GB Unified Memory Means for Local LLMs
- OpenAI Tripled Revenue to $5.7B but Burned $3.7B: What It Means for Local AI
- RX 9070 XT vs RTX 3060 12GB for Local LLMs
- Aider vs Cline vs Continue.dev for Local Coding on an RTX 3060 (2026)
- Best USB Microphone for Streaming in 2026: HyperX QuadCast 2 vs Blue Yeti
- Best SSD for a Local LLM Model Library in 2026: Capacity vs Load Speed
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090