Antrader 1ft 40 Pin F/F Connector USB ASP ISP JTAG AVR Wire IDC Flat Rainbow Ribbon Data Cable 2.54mm 2 Pieces
Bottom line: The Antrader 1ft 40 Pin F/F Connector USB ASP ISP JTAG AVR Wire IDC Flat: Two 12 in (30cm) cables per pack; main trade-off: female-to-female only; won't mate with female headers without an adapter.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Two 12 in (30cm) cables per pack
- ✓ Female 2 x 20 sockets on both ends fit standard 2.54mm male headers
- ✓ 28 AWG 7x36 stranded wire flexes well in tight builds
- ✓ 300V wire rating covers low-voltage logic and programming lines
- ✓ Rainbow conductors peel apart for custom terminations
Cons
- ✗ Female-to-female only; won't mate with female headers without an adapter
- ✗ 12 in length is too short for long chassis or between-bench runs
- ✗ 28 AWG conductors are thin for carrying meaningful power
- ✗ Fixed 40-way width; smaller headers need a different cable
Manufacturer description
The Antrader 40 pin IDC ribbon cable two-pack gives you a short female-to-female jumper for any board with 2.54mm pin headers. Each cable is 12 inches (30cm) long and has a 2 x 20 female socket on both ends, so it joins two male 40-pin headers directly with no adapter. The cable uses 28 AWG (7x36) stranded wire rated at 300V, set at a 0.05 inch (1.27mm) conductor pitch. The stranded core bends without much effort for routing inside an enclosure or across a bench setup. The rainbow color coding makes it easy to trace a single pin when you are probing signals or checking continuity. The…
SpecPicks Verdict
SpecPicks scored Antrader 1ft 40 Pin F/F Connector USB ASP ISP JTAG AVR Wire IDC Flat… using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. Antrader's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How long is the Antrader 40 pin ribbon cable?
Each cable is 12 inches (30cm) in total length, and the pack includes two cables.
What connector spacing does this cable fit?
Both ends have 40-pin 2 x 20 female IDC sockets that fit male pin headers with standard 2.54mm (0.1 inch) spacing. The individual conductors in the ribbon run at a 1.27mm (0.05 inch) pitch.
Will it work with my AVR programmer or JTAG debugger?
Antrader lists it as suitable for most Atmel AVR JTAG debuggers, in-system programmers and ISP download setups. Your board needs a 40-pin 2 x 20 male header at 2.54mm spacing. Check your programmer's pinout and header size before ordering.
Can I use this as an IDE hard drive cable in a retro PC?
The listing does not mention IDE. It's a generic 40-way, 2.54mm female-to-female ribbon cable. Faster IDE modes need an 80-conductor cable, and some boards expect keyed connectors, so check your drive and motherboard requirements first.
What gauge is the wire and can I split the ribbon?
The conductors are 28 AWG (7x36) stranded wire rated at 300V. The ribbon separates cleanly, so you can peel off individual wires and terminate them with standard connectors, jacks or pins.
Key Features
- 40Pin 40Way/ Female to Female, compatible with 2.54mm spacing pin headers.
- Total length is 12" (30cm) with 2.54mm Female to Female 40P 2 x 20 sockets.
- Wire: 28 AWG (7x36) Stranded 300V; Wire Pitch: 0.05" (1.27 mm) Center Spacing.
- Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins.
- 2pcs IDC Connector flat Ribbon cable, Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc.
Full Specifications
| Wire | 28 AWG (7x36) Stranded 300V; Wire Pitch: 0.05" (1.27 mm) Center Spacing. |
|---|---|
| Brand | Antrader |
| Color | Rainbow |
| Gauge | 28 |
| Model | USB-40P-30CM |
| Cable Type | USB |
| Item Shape | Round |
| Unit Count | 2 Count |
| Item Length | 30 centimeters |
| Part Number | AZ18073101 |
| Connectivity | USB |
| Connector Type | USB Type A |
| Number of Pins | 40 |
| Maximum Voltage | 300 volts |
| Number of Items | 2 |
| Special Feature | Braided |
| Connector Gender | Female-to-Female |
| Specification Met | ISO |
| Compatible Devices | Monitor |
| Indoor Outdoor Usage | Indoor, Outdoor |
Ready to buy?
Antrader 1ft 40 Pin F/F Connector USB ASP ISP JTAG AVR Wire IDC Flat Rainbow Ribbon Data Cable 2.54mm 2 Pieces is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Kimi K3 Open Weights: What It Takes to Run It Locally
- Best Budget Gaming Monitor in 2026: 5 Picks From 1440p to 4K
- When a Game Boy Clone Runs Too Fast: The Crystal-Swap Fix Behind a Viral Repair
- How Fast Is Local LLM Inference on a Ryzen 7 5800X (CPU-Only, No GPU)?
- Acti Brings AI Agents Into Your Smartphone Keyboard
- Best Parts for a Long-Context Local LLM Workstation in 2026
- Best Handheld Gaming PC Under $300 in 2026
- CRT vs LCD for Retro Gaming: Which Wins in 2026?
- Period-Correct Sound for a Modern Retro PC: The Sound Blaster G6 and the EAX Legacy
- Build a Pocket Retro Emulation Handheld on the Raspberry Pi Zero W in 2026
- Forza Horizon 6 on Steam Deck: How Well Does It Run?
- Sony Trinitron FW900 Setup for Retro Gaming: Resolution Sweet Spots, Calibration, and Refresh-Rate Math
- Intel Kills BigDL: The Local-LLM Path Forward in 2026
- Best Controller for Retro Emulation on PC: 8BitDo Pro 2 vs GameSir G7 SE
- Self-Host a 24/7 FM Radio Station on a Raspberry Pi Zero 2W
- Retro Game Emulator Online: Top Browser-Based Picks for 2026
- RTX 5080 vs RTX 4080 SUPER — one generation apart
- Can the Ryzen 5 5600G Game at 1080p Without a Graphics Card in 2026?
- RTX 4080M Desktop Build: 100W Gaming vs. RX 9070 GRE
- Best GPU for Training CNNs at Home in 2026: The RTX 3060 12GB Case
- ComfyUI on an RTX 3060 12GB: What Image Models Actually Run Well
- Best SSD for Raspberry Pi Boot (2026): USB SATA vs NVMe
- Run Home Assistant on a Raspberry Pi 4 8GB in 2026 (SSD Boot)
- Best Storage Upgrades for Retro and Budget PC Builds in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090