Skip to main content
BTF-LIGHTING RGBW LED Strip Lights,UL Listed,5050 4 Colors in 1 RGB + 2700K-3000K Warm White,12V DC,16.4ft/5m 60LEDs/m 12mm Black PCB, IP30 for Home Decoration(No Adapter or Controller)
BTF-LIGHTING

BTF-LIGHTING RGBW LED Strip Lights

Bottom line: The BTF-LIGHTING RGBW LED Strip Lights: True 2700K warm white chip, not RGB-blended white with a color cast.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar rgb & lighting

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ True 2700K warm white chip, not RGB-blended white with a color cast
  • ✓ 300 LEDs over 16.4ft at 60/m for dense, even light output
  • ✓ UL Recognized strip, wires, and PCB with 3M adhesive pre-applied
  • ✓ Works with WLED, ESP32, Raspberry Pi, Tuya, Zigbee 3.0, and DMX 512

Cons

  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

Manufacturer description

BTF-LIGHTING's RGBW LED Strip puts four chips in one 5050 package - red, green, blue, and a dedicated 2700K-3000K warm white - so you get 16 million colors plus clean white light without the pink or blue cast that plagues RGB-only strips mixing their own white. The 16.4ft (5m) run carries 300 LEDs at 60 per meter on a 12mm black PCB, which disappears against dark surfaces better than the usual white backing. It is UL Recognized, with UL-certified wires, PCB, and a pre-attached 5-pin (+12V G R B W) connector at each end for daisy-chaining runs in series. Cut marks land every 3 LEDs, and 3M…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored BTF-LIGHTING RGBW LED Strip Lights using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. BTF-LIGHTING's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does this LED strip come with a power supply and controller?

No. The package includes the 16.4ft RGBW strip and one 5-pin male connector only. BTF-LIGHTING recommends a DC12V 4A 48W power supply, purchased separately, plus an RGBW-capable controller.

What is the difference between RGBW and regular RGB strips?

RGBW adds a fourth dedicated white chip - here a 2700K-3000K warm white - alongside red, green, and blue in the same 5050 package. RGB strips create white by mixing all three colors, which leaves a visible color cast. The dedicated white chip gives cleaner, more efficient white light.

Can I cut this strip to fit my space?

Yes. The flexible PCB has cut marks every 3 LEDs, so you can trim to length and reconnect using the pre-fitted 5-pin (+12V G R B W) male and female connectors for daisy-chaining.

Will this work with WLED or a Raspberry Pi project?

Yes. BTF-LIGHTING lists compatibility with SP805E WLED, ESP32, Raspberry Pi, and Arduino UNO R3, along with Tuya controllers (RC09RF, WB5, LM053), BanlanX SP630E/SP530E/SP614E, Zigbee 3.0 (LM052, C04Z), and DMX 512 consoles.

Can I use this strip outdoors or in a bathroom?

Not this version. It is IP30, which means no moisture protection and dry indoor use only. BTF-LIGHTING offers IP65 and IP67 variants of this strip for damp or wet locations; IP67 is 14mm wide and needs fastening clips rather than adhesive.

Key Features

  • 【RGBW White Advantages】Vibrant color blending from SMD RGB+WHITE 4-in-1 LEDs.16.4ft 300 LEDs total, offering 16 million stunning colors with bright glow.Dedicated pure white light(2700K warm white)delivers cleaner, natural illumination and higher efficiency. Completely eliminates color cast from traditional RGB mixed white.Excellent pure lighting effect in static and dynamic modes. Dimmable with 50,000+ hours lifespan.
  • 【Precise Cut & Effortless Connection】Cuttable & linkable LED tape for hassle-free DIY. Pre-fitted UL-certified 5-pin (+12V G R B W) male/female connectors enable effortless series daisy-chaining. Flexible PCB supports custom layouts; cut along marks every 3 LEDs.
  • 【UL Listed】UL Recognized LED strip for guaranteed safety, featuring 3M double-sided adhesive, UL Recognized wires and PCB .IP30/IP65 come with 3M tape for easy mounting; IP67 require fastening clips (no adhesive included).IP30/IP6-12mm FPCB; IP67-14mm width
  • 【Wide Compatibility】Compatible with a wide range of controllers: DIY (SP805E WLED,ESP32, Rasp Pi, UNO R3 etc.), Tuya (RC09RF+C04RF/C04W, RC03RFB+C04RF, WB5, LM053), BanlanX (SP630E/SP530E/SP614E etc.), industrial (DMX 512 Console etc.) and Zigbee 3.0 (LM052, C04Z).Choose the controller matching your project.Recommended power supply: DC12V 4A 48W
  • 【Endless Versatile Applications】Perfect for indoor home decor, architectural lighting, commercial venues, theaters, DIY projects, LED screens, video walls, billboards, and festive decor. Multiple IP ratings (IP30/IP65/IP67) fit diverse indoor installations for vibrant ambiance.
  • 【Package Listed】1xRGBW LED strip,1x 5PIN male connector .Only support 12V power supply.Do NOT connect to DC5V or DC24V power supply. This will permanently damage the strip.Note: Power supply and controller are not included and need to be purchased separately.

Full Specifications

BrandBTF-LIGHTING
Color12v RGB+Warm White 3000K-3500K
StyleModern
ThemeIndoor LED Strip Lighting
Voltage12 Volts
Wattage90 watts
OccasionChristmas, Halloween, New Year
Unit Count16.4 Feet
Form FactorStrip Lights
Item Length196.8 Inches
Light ColorMulticolor
Model NumberRGBWW45M505060LB30
Power SourceCorded Electric
Material TypeSilicone Rubber
Product StyleModern
Control MethodVoice
Controller TypeIFTTT, Voice Control
Item Dimensions6.3 x 4.33 x 2.36 inches
Number of Items1
Special FeatureWaterproof
Full listing titleBTF-LIGHTING RGBW LED Strip Lights,UL Listed,5050 4 Colors in 1 RGB + 2700K-3000K Warm White,12V DC,16.4ft/5m 60LEDs/m 12mm Black PCB, IP30 for Home Decoration(No Adapter or Controller)

Ready to buy?

BTF-LIGHTING RGBW LED Strip Lights,UL Listed,5050 4 Colors in 1 RGB + 2700K-3000K Warm White,12V DC,16.4ft/5m 60LEDs/m 12mm Black PCB, IP30 for Home Decoration(No Adapter or Controller) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related RGB & Lighting

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
BTF-LIGHTING RGBW LED Strip Lights,UL Listed,5050 4 Colors in 1 RGB + 2700K-3000K Warm White,12V DC,16.4ft/5m 60LEDs/m 12mm Black PCB, IP30 for Home Decoration(No Adapter or Controller)
View on Amazon →