COMeap ATX Power Jumper Cable, 24 Pin ATX Red LED Power On/Off Switch Bridge Adapter Braided 21.5-inch(55cm)
Bottom line: The COMeap ATX Power Jumper Cable: Bench-tests a PSU with no motherboard: bridges 24-pin or 20-pin ATX on/off; main trade-off: LED stays dark on 20-pin supplies, so older units give no visual confirmation.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Bench-tests a PSU with no motherboard: bridges 24-pin or 20-pin ATX on/off
- ✓ Red LED confirms the rail is live at a glance on 24-pin supplies
- ✓ Rated to 1000W, so it handles high-wattage ATX and retro AT-to-ATX bench work
- ✓ 1007-18AWG tin-coated copper in a braided sleeve resists fraying at the connector
- ✓ 21.5in (55cm) run plus included self-adhesive tape lets you route it off the bench
Cons
- ✗ LED stays dark on 20-pin supplies, so older units give no visual confirmation
- ✗ Single cable per pack - you need a second for dual-PSU bench setups
- ✗ No inline switch position marking; on/off state relies on the LED alone
- ✗ 55cm is short for reaching a PSU mounted in a full-tower case bottom
SpecPicks Verdict
SpecPicks scored COMeap ATX Power Jumper Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. COMeap's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 『ATX Power Jumper Cable』Allowing you to turn on/off your 24 pin/20 pin ATX power supply;
- 『LED Indication』Illuminated Red LED light indicates that the power supply is on;
- 『Parameter』Gauge: 1007-18AWG (standard tin-coating copper wire), Length: 21.5inches(55cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs;
- 『Sleeved』With Braided Sleeves for easy cable management;
- 『Note』The LED light is off when to connect with 20 pin ATX power supply;
Full Specifications
| Brand | COMeap |
|---|---|
| Color | Red |
| Gauge | 18 |
| Wattage | 1000 watts |
| Plug Type | ATX 24-pin connector |
| Unit Count | 1 Count |
| Item Length | 21.5 inches |
| Plug Format | ATX 24-pin connector |
| Compatibility | Switch |
| Connector Gender | Female |
| Special Features | Braided |
| Indoor Outdoor Usage | Outdoor |
| 『Parameter』Gauge | 1007-18AWG (standard tin-coating copper wire), Length: 21.5inches(55cm), Maximum power: 1000 watts, Quantity: 1pcs, Self-adhesive tape*1pcs; |
| Power Cord Prong Count | 24 |
Ready to buy?
COMeap ATX Power Jumper Cable, 24 Pin ATX Red LED Power On/Off Switch Bridge Adapter Braided 21.5-inch(55cm) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- MicroPython Now Runs on the Super Nintendo — Here's What That Means
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best 27-Inch Gaming Monitor?
- KOORUI vs Samsung Odyssey: Best 27" 4K Gaming Monitor?
- Qwen 3.6 27B vs Llama 3.1 70B on Local Hardware: tok/s, VRAM, and Quality (2026)
- SANSUI vs KOORUI 27" 4K: Which Budget 4K Gaming Monitor Wins?
- Raspberry Pi 4 as a SimHub Dash for a Logitech G29 Rig
- AMD RX 9070 XT Hits All-Time Low $629 in Amazon Lightning Sale
- Best NVMe Boot SSD for an AM4 Ryzen Build: 970 EVO Plus vs the Budget Field
- MTP (Multi-Token Prediction): 2x Faster Token Generation on AMD Strix Halo & Radeon 9700 AI Pro
- Authentic Retro PC Audio in 2026: Sound BlasterX G6 vs Vintage AWE64 and Audigy
- Best Budget AM4 Gaming PC Parts in 2026
- Best GPU for Gemma 3 27B in 2026: Where 12 GB Stops Being Enough
- Build a Raspberry Pi Zero W Cyberdeck in 2026: BOM + Wiring Guide
- Best Retro-PC Storage & Drive-Imaging Kit in 2026: 5 Picks
- Best Sim Racing Wheels for Beginners in 2026
- Best Gaming Keyboard for Office and Gaming Crossover (2026)
- Intel LLM-Scaler vLLM 1.4 on Arc Pro B70: What the Latest Driver Stack Means for Local Inference
- Best GPU for 1080p High-Refresh Esports 2026: RTX 3060 12GB
- Best Uses for Old RAM Sticks in 2025
- Raspberry Pi OS Moves to the Linux 6.18 LTS Kernel
- Best GPU for Training CNNs at Home in 2026: The RTX 3060 12GB Case
- Local LLMs for Generating Interactive Textbooks On the Fly
- Can Local Qwen 3.6 Match Frontier Models at Canvas Code?
- RTX 3060 12GB vs Ryzen 5 5600G iGPU: Do You Need a GPU for 1080p Esports?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090