EZDIY-FAB [20cm] PCIE 3.0 16x Extreme High Speed Riser Cable PCI Express Port GPU Extension Card-Straight Connector
Bottom line: The EZDIY-FAB [20cm] PCIE 3.0 16x Extreme High Speed Riser Cable PCI: Pure copper tinned core keeps PCIe 3.0 signaling stable across the full 20cm run; main trade-off: no PCIe 4.0 support, so RTX 30/40 and RX 6000+ cards drop to Gen3 speeds.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Pure copper tinned core keeps PCIe 3.0 signaling stable across the full 20cm run
- ✓ EMI shielding blocks interference from PSU and case fans in tight builds
- ✓ Sectional flexible design bends for vertical GPU mounts without kinking
- ✓ Straight 180-degree connector plus a 90-degree variant covers most case layouts
Cons
- ✗ No PCIe 4.0 support, so RTX 30/40 and RX 6000+ cards drop to Gen3 speeds
- ✗ 20cm length is short for full-tower vertical mounts needing longer reach
- ✗ Straight connector may not clear tight side-panel clearance in slim cases
- ✗ Riser cables can cause boot or detection issues in some motherboards
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for EZDIY-FAB [20cm] PCIE 3.0 16x Extreme High Speed Riser Cable PCI…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. On the listing's own facts, the case for it is "Pure copper tinned core keeps PCIe 3.0 signaling stable across the full 20cm run"; the main trade-off is "No PCIe 4.0 support, so RTX 30/40 and RX 6000+ cards drop to Gen3 speeds". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Imported cable and the core is made of pure copper tinning process, which ensures the signal is full speed, stable and almost no attenuation transmission.
- EMI (electromagnetic interference) shielded to eliminate signal interference and ensure maximum performance.
- Flexible sectional cable design allows for installing in various orientations and better airflow.
- Supports PCIE3.0/2.0/1.0, Doesn't Support PCIE4.0
- Available in straight (180°), right angled (90°) connector variations with wide compatibility mounting hole.
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| Color | Black |
| Model | US-NEW PCIE20CM-180 |
| Cable Type | PCIe |
| Item Shape | Round |
| Unit Count | 1.0 Count |
| Item Length | 20 Centimeters |
| Part Number | US-NEW PCIE20CM-180 |
| Connector Type | Pcie |
| Number of Pins | 62 |
| Number of Items | 16 |
| Special Feature | High Speed |
| Connector Gender | Male-to-Female |
| Compatible Devices | [Not Specified] |
| Data Transfer Rate | 16 Gigabits Per Second |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Customer Package Type | sealed anti-static bag |
| Recommended Uses For Product | Extending and providing orientation flexibility for the GPU connection to the motherboard in a computer system |
| Other Special Features of the Product | High Speed |
Ready to buy?
EZDIY-FAB [20cm] PCIE 3.0 16x Extreme High Speed Riser Cable PCI Express Port GPU Extension Card-Straight Connector is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Build a Raspberry Pi Zero Cyberdeck in 2026: Parts, Wiring and a Working BOM
- Gemma 4 31B on a 24GB GPU: RTX 3090 vs RTX 4090 vs RX 7900 XTX Quant Table (2026)
- AMD Ryzen 7 9800X3D Bundle: DDR5 + MSI B850 Wi-Fi 7 Guide
- Budget Ollama Build Under $500: What Actually Runs in 2026
- Kingston 2GB DDR Modules: Identifying and Buying RAM for a 2004-Era Retro PC
- Best Wireless Controller for PC Gaming in 2026
- Best Noctua Cooling Products in 2026: A Brand Buying Guide
- Cerebras Running GPT-5.4 and 5.5 Internally: What it Means for Local LLM Builders
- After the Mythos Cyber-Ops Report, Why Run AI on an Air-Gapped Local Box
- Claude Opus 4.8 Tops the Intelligence Index: Cloud vs Local on a 3060
- NVIDIA's AI Servers Run on Hot Tub Coolant — No Evaporators Neede
- Expanding the SNES Classic and Genesis Mini Library in 2026
- 3D Printed Glow-Spike Bracelet: Adafruit Builder's Guide 2026
- Best Home Office Monitor Under $200 (2026)
- Kingston A400 960GB vs Crucial BX500 1TB for a PS4 Pro SSD Upgrade
- How to Image and Preserve Vintage IDE and CompactFlash Drives in 2026
- Mini-ITX Gaming PC in a 3D Printed Case: 2026 Builder's Guide
- Logitech Slashes Gaming Mouse Prices up to 47% for Prime Day
- Best SSD for Retro PC IDE-to-SATA Builds (Win98, WinXP) in 2026
- Qwen 3.8 Open Weights: What Fits on a 12GB GPU
- Building a DualSense PC Adapter with a Raspberry Pi for $20 (2026)
- Crucial BX500 vs Samsung 870 EVO: Best 1TB SATA SSD for Game Storage
- The $5M Sega Bet That Saved Nvidia — and Still Shapes GPU Launches
- Running Qwen3.5/3.6 with NextN MTP on an RTX 3090 Ti
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090