Easycargo 40mm Heatsink Fan 12V Kit
Bottom line: Per its Amazon listing, the Easycargo 40mm Heatsink Fan 12V Kit: 40mm Fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc; fan dimension: 40x40x10mm, 12V DC, wire connector 2-pin-2.5mm, wire length: 5.9"/15cm.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 40mm Fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc
- ✓ Backed by Easycargo's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
12V DC cooler fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier. Each pack includes: 1pc 12V DC fan, 1pc heatsink, 1pc thermal tape, 1 metal grill, screw mounting screw nut set. Fan dimension: 40x40x10mm, 12V DC, wire 2-pin-2.5mm connector 5.9"/15cm, speed: 6500rpm, airflow 7.93CFM, noise level: 28 dBA, life time: 50000 hours,, start up voltage: 7V DC, working voltage range: 10.8-13.2V DC.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Easycargo 40mm Heatsink Fan 12V Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 40mm Fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc
- Fan specifications: Ball bearing, speed 6500rpm, airflow 7.93CFM, noise level: 28 dBA, life time: 50000 hours,, start up voltage: 7V DC, working voltage range: 10.8-13.2V DC
- Fan dimension: 40x40x10mm, 12V DC, wire connector 2-pin-2.5mm, wire length: 5.9"/15cm.
- Heatsink dimension: 40x40x11mm, Adhesive thermal pad dimension: 40x40x0.5mm.
- Each pack includes: 1pc 12V DC fan, 1pc heatsink, 1pc thermal pad, 1 metal grill, screw mouthing screw nut set.
Full Specifications
| Brand | Easycargo |
|---|---|
| Voltage | 12 Volts, 13.2 Volts |
| Wattage | 7 watts |
| Material | Metal |
| Dimensions | 40x40x10mm |
| Unit Count | 1 Count |
| Noise Level | 28 Decibels |
| Part Number | 4010-FH-12V-1pc |
| Fan dimension | 40x40x10mm, 12V DC, wire connector 2-pin-2.5mm, wire length: 5.9"/15cm. |
| Material Type | Metal |
| Cooling Method | Air |
| Number of Items | 5 |
| Air Flow Capacity | 7.93 Cubic Feet Per Minute |
| Compatible Devices | Desktop, Printer |
| Each pack includes | 1pc 12V DC fan, 1pc heatsink, 1pc thermal pad, 1 metal grill, screw mouthing screw nut set. |
| Heatsink dimension | 40x40x11mm, Adhesive thermal pad dimension: 40x40x0.5mm. |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 6500 RPM |
| Item Dimensions L x W x H | 1.57"L x 0.39"W x 1.57"H |
| Full listing title | Easycargo 40mm Heatsink Fan 12V Kit, Cooler Heat Sink 40x40mm + 12V Ball Bearing Fan + Thermal Tape + Grill Screw Mounting Kit (1) |
Benchmark data for other processors
Ready to buy?
Easycargo 40mm Heatsink Fan 12V Kit, Cooler Heat Sink 40x40mm + 12V Ball Bearing Fan + Thermal Tape + Grill Screw Mounting Kit (1) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Capture Setup for Console Streaming in 2026: Elgato Cam Link 4K + PS4 Pro
- Pentium III Coppermine vs Tualatin: Which 2001 LAN Build CPU Aged Better
- 32GB of DDR5 Drops to $240 in New Newegg Build Bundles
- OpenAI's Codex Price War: When Local Coding on an RTX 3060 Wins
- Tencent Hunyuan-MT 440MB On-Device Translator: Which Phones and SBCs Can Actually Run It?
- Etched's Transformer-Only Inference Chip vs Your GPU: What Changes for Local Builders
- 007: First Light Is Great on Steam Deck
- Best Wireless Controller for PC Gaming on Couch and Living Room (2026)
- Building a CompactFlash Boot Drive for a Windows 98 Retro PC
- Raspberry Pi Zero W vs Pi 4 for a 2026 Cyberdeck: Which Board Fits?
- Best Raspberry Pi Alternatives for AI in 2026
- Surprise AI Bills: Moving LLM Work to a Local RTX 3060 12GB Rig
- Intel Arc B580 LLM Inference: 12GB Battlemage Benchmarks
- Ryzen 5 5600X vs 5700X vs 5800X: Best AM4 Gaming CPU in 2026
- Best Travel Gaming Kit in 2026: 5 Picks for Hotels and Flights
- Building a Budget Local-AI Box: Ryzen 7 5800X + RTX 3060 12GB
- Period-Correct Pentium III + GeForce 4 Ti Build for 2001-2003 Gaming
- Best Controller for Steam Deck and PC in 2026: 8BitDo vs GameSir vs DualSense
- Best Storage Upgrades for Older Gaming PCs in 2026
- Best Budget Gaming Mouse + Mousepad Combo Under $80 in 2026
- Razer Blade 16 (2026) Review: Gaming Performance and Endurance
- Llama 3.3 70B: Dual RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- The Budget Streaming Starter Kit: Mic, Light, and Webcam Under $250
- RTX 3060 12GB vs Arc B580 for 1080p Gaming: Which Wins?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090