Easycargo 2-Pack 40mm Heatsink Fan 12V Kit
Bottom line: Per its Amazon listing, the Easycargo 2-Pack 40mm Heatsink Fan 12V Kit: 40mm Fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc; fan dimension: 4010 40x40x10mm, 12V DC, wire connector 2-pin-2.5mm, wire length: 5.9"/15cm.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 40mm Fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc
- ✓ Backed by Easycargo's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
40mm 12V DC cooler fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier. Each pack includes: 1pc Dual ball bearing 12V DC fan, 1pc heatsink, 1pc thermal tape, 1 metal grill, screw mounting screw nut set. Fan dimension: 40x40x10mm, 12V DC, wire 2-pin-2.5mm connector 5.9"/15cm, speed: 6500rpm, airflow 7.93CFM, noise level: 28 dBA, life time: 50000 hours,, start up voltage: 7V DC, working voltage range: 10.8-13.2V DC.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Easycargo 2-Pack 40mm Heatsink Fan 12V Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 40mm Fan heatsink kit for cooling 3D Printer, TEC1-12706 Thermoelectric Peltier etc
- Fan specifications: Ball bearing, speed 6500rpm, airflow 7.93CFM, noise level: 28 dBA, life time: 50000 hours,, start up voltage: 7V DC, working voltage range: 10.8-13.2V DC
- Fan dimension: 4010 40x40x10mm, 12V DC, wire connector 2-pin-2.5mm, wire length: 5.9"/15cm.
- Heatsink dimension: 1.6x1.6x0.43 inch / 40x40x11mm, Adhesive thermal pad dimension: 1.6x1.6x0.02 inch / 40mmx40mmx0.5mm.
Full Specifications
| Brand | Easycargo |
|---|---|
| Model | ES-FH404011-12V |
| Voltage | 12 volts |
| Wattage | 7 watts |
| Material | Metal |
| Dimensions | 40x40x10mm |
| Unit Count | 1 Count |
| Noise Level | 28 db |
| Part Number | ES-FH404011-12V |
| Fan dimension | 4010 40x40x10mm, 12V DC, wire connector 2-pin-2.5mm, wire length: 5.9"/15cm. |
| Material Type | Metal |
| Cooling Method | Air |
| Number of Items | 2 |
| Air Flow Capacity | 7.93 cfm |
| Compatible Devices | Desktop, Printer |
| Heatsink dimension | 1.6x1.6x0.43 inch / 40x40x11mm, Adhesive thermal pad dimension: 1.6x1.6x0.02 inch / 40mmx40mmx0.5mm. |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 6500 rpm |
| Item Dimensions L x W x H | 1.57"L x 1.57"W x 0.87"H |
| Full listing title | Easycargo 2-Pack 40mm Heatsink Fan 12V Kit, Cooler Heat Sink 40x40mm + 12V Ball Bearing Fan + Thermal Tape + Grill Screw Mounting Kit for Cooling 3D Printer, TEC1-12706 Thermoelectric Peltier (2) |
Benchmark data for other processors
Ready to buy?
Easycargo 2-Pack 40mm Heatsink Fan 12V Kit, Cooler Heat Sink 40x40mm + 12V Ball Bearing Fan + Thermal Tape + Grill Screw Mounting Kit for Cooling 3D Printer, TEC1-12706 Thermoelectric Peltier (2) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Qwen3 0.6B: Raspberry Pi 4 8GB vs Ryzen 5 5600G for Tiny-Model Hosts (2026)
- Best Components for a Budget Local-LLM Workstation in 2026
- Grok 4.5 at $0.31 a Task: When Cheap Cloud Beats a Local Build
- Best SSD for the PS4 Pro in 2026: SATA Upgrade Guide
- Best Microphones for Streaming and Podcasting (2026)
- Silicon Motion PCIe 6.0: Nvidia AI Drives Consumer Storage
- OpenAI Codex Now Drives Windows Autonomously: What It Means for Local AI Rigs
- AI Coding Agents Find the Right File but Miss the Lines — What Local Code Models on a 12GB GPU Get Wrong
- 32B Models on 12GB VRAM: What an RTX 3060 Can Really Run in 2026
- How to Image a 90s Big-Box CD-ROM to CompactFlash for IDE-Adapter Retro PCs
- Beijing's $295B AI Buildout Wants 80% Domestic Chips — What It Means for GPU Buyers
- Raspberry Pi 5 Projects Worth Building in 2026
- RTX 3060 12GB vs Arc B580 for 1080p Gaming: Which Wins?
- How to Run a SATA SSD on a Windows XP Retro Gaming PC (AHCI + Adapters)
- Automated Cabinet Lighting With a Raspberry Pi: Build Guide
- CompactFlash as a Win98 Boot Drive: Sizes, Limits, Gotchas
- Running Your Own AI Guardrail Model on a 12GB GPU in 2026
- Period-Correct Windows 98 Boot Drive: CompactFlash vs IDE SSD
- Ryzen 5 5600G vs Ryzen 7 5700X for a No-GPU Home Server
- FIDECO vs Unitek vs Vantec: Best IDE-to-USB Adapter for Dumping Retro Drives
- 3dfx Voodoo3 3000 PCI vs Voodoo5 5500 AGP: Win98 Performance Synthesis (2026)
- Microsoft's Copilot Super App vs a Local RTX 3060 Ollama Box in 2026
- Jellyfin on a Ryzen 5 5600G: 4K Transcoding on a $400 Mini-Server (2026)
- Intel Plans Two 22-Core Nova Lake-S SKUs With Game-Boosting Cache
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090