BIFALE SDI Cable
Bottom line: The BIFALE SDI Cable: Carries SD-SDI, HD-SDI and 3G-SDI signals on one 75 ohm cable; main trade-off: 10ft length is too short for most camera-to-DVR runs across a building.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Carries SD-SDI, HD-SDI and 3G-SDI signals on one 75 ohm cable
- ✓ 18 AWG 4N oxygen-free copper center conductor with foamed PE insulation
- ✓ 99% metallic braided shield plus foam HDPE dielectric to block EMI/RFI
- ✓ Reinforced joints rated for 6,000+ bends and 5,000 plug cycles
- ✓ 7.0mm RoHS PVC jacket rated -4F to 176F for wall, attic and conduit runs
Cons
- ✗ 10ft length is too short for most camera-to-DVR runs across a building
- ✗ 12G-SDI is not listed, so it is not specified for single-link 4K SDI
- ✗ BNC on both ends only; HDMI-only gear needs a separate SDI converter
- ✗ 7.0mm outside diameter is bulky for tight bends and crowded patch panels
Manufacturer description
The BIFALE SDI Cable is a 10ft BNC-to-BNC cable for SD-SDI, HD-SDI and 3G-SDI signals. One cable covers standard-definition gear through 1080P CCTV cameras and video equipment. It uses a 75 ohm coaxial design, which is the impedance SDI connections are built around. A foam HDPE dielectric and a 99% metallic braided shield guard the signal against EMI and RFI interference. The center conductor is 18 AWG 4N oxygen-free ETP copper. It is wrapped in physically foamed PE insulation, which BIFALE says reduces attenuation. Both ends have 24K gold plated pins set in copper alloy BNC connectors. The…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for BIFALE SDI Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "Carries SD-SDI, HD-SDI and 3G-SDI signals on one 75 ohm cable"; the main trade-off is "10ft length is too short for most camera-to-DVR runs across a building". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does this BIFALE cable support 3G-SDI?
Yes. BIFALE lists support for SD-SDI, HD-SDI and 3G-SDI over a 75 ohm coaxial design. 12G-SDI is not listed, so don't count on it for single-link 4K SDI signals.
Will it work with my HD-SDI security camera and DVR?
It is built for 1080P CCTV video security systems and has 75 ohm BNC connectors on both ends. Check that your camera and recorder both have BNC SDI ports. Devices with HDMI-only inputs need an SDI converter.
Can I run this cable through walls or conduit?
BIFALE says the upgraded RoHS PVC jacket is flexible enough to route through walls, ceilings, attics and conduit. The outside diameter is 7.0mm (0.2756 in) and the rated temperature range is -4F to 176F. No plenum rating is listed, so check local building code for in-wall installs.
What is the conductor and connector made of?
The center conductor is 18 AWG 4N oxygen-free ETP copper with physically foamed PE insulation. It has a foam HDPE dielectric and a 99% metallic braided shield. The BNC ends use 24K gold plated pins in copper alloy connector housings.
How durable are the connectors with frequent plugging?
The reinforced joints are rated for more than 6,000 bend cycles and 5,000 plug-and-unplug cycles, and BIFALE says they resist corrosion. Check the product listing for current warranty terms, since the listing doesn't state any.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【HD Braided】The BIFALE SDI cable support SD-SDI, HD-SDI, 3G-SDI, 75-ohm, foam HDPE dielectric and 99% heavy duty metallic shield mesh braided, no signal loss, anti EMI/RFI.
- 【18AWG 4N OFC】Our 3g sdi cable is made of pure 4N OFC 18 AWG ETP (Electrolytic Tough Pitch) copper center conductor, physical foaming PE, could reduce attenuation and speed up signal transmission.
- 【24K Gold Plated Pin】BIFALE hd sdi cable use 24k gold plated pin increasing conductor more connectivity & stability, heavy duty copper ALLOY CONNECTORS provide a good quality. The reinforced joint can resist corrosion and stand 6,000+ cycles of bending and 5,000 plugs and unplugs
- 【Upgraded ROHS PVC】Upgraded PVC jacket makes the cable more durable & flexible and more easier to install through walls, ceilings, attics and conduit. OD=0.2756 inch(7.0mm). Temperature tolerance range -4℉-176℉
- 【Customer Service】If there are any issues with 3G SDI cables, please contact us.
Full Specifications
| Brand | BIFALE |
|---|---|
| Color | Black |
| Gauge | 18.0 |
| Model | 5698765322 |
| Weight | 3g |
| Frequency | 3 GHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Model Name | 5698765322 |
| Unit Count | 1 Count |
| Item Length | 10 Feet |
| Part Number | 3467897553 |
| Connector Type | BNC |
| Number of Pins | 2 |
| Outer Material | Polyvinyl Chloride (PVC) |
| Number of Items | 1 |
| Special Feature | 18AWG 4N OFC,24K Gold Plated Pin,Upgraded ROHS PVC, Foam HDPE dielectric and 99% heavy duty metallic shield mesh braided, no signal loss, anti EMI/RFI. |
| Connector Gender | Male-to-Male |
| Specification Met | RoHS |
| Compatible Devices | Monitor |
| Full listing title | BIFALE SDI Cable - 10ft HD-SDI Heavy Duty BNC to BNC 75 Ohm Coaxial Cable for 1080P CCTV Video Security Systems |
Ready to buy?
BIFALE SDI Cable - 10ft HD-SDI Heavy Duty BNC to BNC 75 Ohm Coaxial Cable for 1080P CCTV Video Security Systems is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Logitech Slashes Gaming Mouse Prices up to 47% for Prime Day
- 007: First Light Is Great on Steam Deck
- Ryzen 9 9950X3D vs Core Ultra 9 285K
- M3 Ultra vs RTX 4090 for local LLMs
- Ryzen 5 5600G vs Ryzen 7 5700X: Best Budget AM4 CPU 2026
- Tesla Capped AI Spend at $200/Week — Build a Local Inference Box for Less
- Run Kimi K2.7 Code Locally: Ollama vs llama.cpp on RTX 3060
- Stable Diffusion on Intel Arc vs RTX 3060 12GB: Which Budget GPU Renders Faster?
- Best Steam Deck Dock and 4K Monitor Setup for TV-Mode Gaming in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X: Which for a Budget 1080p Build?
- Raspberry Pi LLM GPU Guide: What Actually Works in 2026
- What We Lost When LAN Parties Died: A 2026 Editorial
- FIDECO vs Unitek SATA/IDE-to-USB Adapters: Imaging and Rescuing Vintage Drives in 2026
- gpt-oss 20B: RTX 3060 12GB vs Ryzen 5 5600G CPU-Only (2026)
- Best Local LLM You Can Run on 12GB of VRAM in 2026
- Ryzen 7 9800X3D vs 7800X3D: The Real-Game FPS Gap at 1080p, 1440p, and 4K
- ComfyUI for NVIDIA Cosmos 3 on an RTX 3060 12GB: Setup + Limits
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Setup and Real tok-per-image Math
- Period-Correct 1999 LAN Rig: Pentium III, Voodoo3 3000, Sound Blaster
- Qwen 3.6 35B-A3B on a 16GB GPU: RTX 5060 Ti vs RX 9060 XT Quant Table
- RTX 5090 AI Cores: What the Specs Actually Mean in 2026
- Windows 98 vs Windows 2000 for a GeForce-Era Retro Gaming Build
- Claude Opus 4.8 Raised the Bar — Best Local Coding LLMs for a 12GB RTX 3060
- Voodoo 5 6000 Lab Method: Two Motherboards, One Dead BIOS
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090