MyLifeUNIT Badge Hole Punch, Slot Puncher for Id Card, PVC Slot and Paper, Heavy-Duty Hole Punch for Pro Use
Bottom line: The MyLifeUNIT Badge Hole Punch ($16.99 on Amazon as of 2026-10-06): Zinc alloy cutter head punches rigid PVC cards without jamming; main trade-off: single fixed slot size only, no interchangeable dies.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Zinc alloy cutter head punches rigid PVC cards without jamming
- ✓ Punches up to 15 sheets of paper per press
- ✓ Standard 0.6 x 0.16 in oval slot fits lanyard clips and badge reels
- ✓ Built-in scrap collector in the lower cover empties without shaking
Cons
- ✗ Single fixed slot size only, no interchangeable dies
- ✗ Compact 5.9 x 1 x 3.15 in body offers no depth guide or margin stop
- ✗ Manual lever, so bulk badge runs get tiring despite the ergonomic grip
- ✗ Metal construction makes it heavier than plastic desk punches
Manufacturer description
The MyLifeUNIT Badge Hole Punch cuts clean oval slots in ID cards, PVC badges, and paper without the jamming that plagues cheaper plastic-bodied punches. The zinc alloy cutter head drives through rigid PVC cleanly, and the all-metal frame is built to resist rust and survive drops, so it holds up to repeated daily use at a front desk or badge station. The punch produces a 0.6 x 0.16 inch elliptical aperture, the standard slot shape for lanyard clips and badge reels, and handles up to fifteen sheets of paper in a single press. At 5.9 x 1 x 3.15 inches it sits easily on a desk, and the…
SpecPicks Verdict
SpecPicks scored MyLifeUNIT Badge Hole Punch using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. MyLifeUNIT's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this punch go through thick PVC ID cards?
Yes. The sharp zinc alloy cutter head is designed for PVC card stock and the manufacturer notes it resists jamming on plastic cards.
What size hole does it make?
An elliptical slot measuring 0.6 x 0.16 inches, the common oval shape used with lanyard clips, badge reels, and strap clips.
How many sheets of paper can it punch at once?
Up to fifteen sheets in a single press, so it doubles as a general paper punch alongside badge work.
Can I use it one-handed or does it need a table?
Both. The handle is shaped for one-handed squeezing in mid-air, and you can also brace it on a table for heavier stock.
Where do the punched scraps go?
Into a collector built into the lower cover. Open the cover to empty it instead of shaking chads out of the mechanism.
Key Features
- Slot puncher is suitable for punching employee certificates, passes, mobile phone foils, various papers, etc., and has strong practicability. Wide range of uses is all kinds of manual punching machine assistant
- ID slot punch is made of heavy metal, the metal structure is firm and rust-free, resistant to falling, with the features of strong penetrating power, high-quality punching, durable, and will not be damaged for long-term use
- Unique design allows you to punch holes in your hand or on a table. Hole puncher can punch up to fifteen sheets at a time, elliptical aperture is 0.6 x 0.16 inches
- Using the sharp zinc alloy cutter head, with strong penetrating power, can easy to punch pvc card, not easy to jam
- Notice: If the paper gets stuck, gently tap the punch handles on the table to fix any looseness
- Ergonomically designed handle of the badge hole punch is comfortable and easy to use, allowing for effortless one-handed operation without fatigue, you can use the one hole punch for a long time without being tired
Full Specifications
| Brand | MyLifeUNIT |
|---|---|
| Color | black |
| Model | KT19ZL110 |
| Notice | If the paper gets stuck, gently tap the punch handles on the table to fix any looseness |
| Material | Alloy Steel, Metal |
| Dimensions | 5.9 x 1 x 3.15 inch |
| Hole Count | 1 holes |
| Unit Count | 1 Count |
| Part Number | KT19ZL110 |
| Sheet Count | 15 |
| Material Type | Alloy Steel, Metal |
| Operation Mode | Manual |
| Number of Items | 1 |
| Number of Packs | 1 |
| Pin Hole Diameter | 0.6 inches |
| Included Components | Badge hole punch, Fixing screws, Depth selector, Assembly instructions |
| Item Dimensions L x W x H | 0.98"L x 3.15"W x 5.91"H |
Ready to buy?
MyLifeUNIT Badge Hole Punch, Slot Puncher for Id Card, PVC Slot and Paper, Heavy-Duty Hole Punch for Pro Use is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Gaming Headset Under $50 for Console + PC (2026)
- Laguna XS.2 Lands in llama.cpp: What the Tiny Hybrid Model Means for Local Inference
- Ryzen AI Max+ 395 LLM Performance: What to Expect
- Best PlayStation 5 Controllers in 2026: 5 Picks for Every Player
- Imaging and Restoring Vintage IDE Drives in 2026: SATA/IDE-to-USB Adapters Compared
- Best Parts for a Gaming PC That Also Runs Local LLMs in 2026
- Build a Budget Local-AI Rig in 2026: Ryzen 7 5800X + RTX 3060 12GB
- Legion Go vs Steam Deck vs ROG Ally: 2026 Buying Guide
- CompactFlash as an IDE Hard Drive for Your Win98 Retro Build
- Ryzen AI Max 400 Gorgon Halo vs RTX 3060 for Local LLMs
- Best Budget 4K Monitor in 2026: SANSUI vs KOORUI vs ASUS TUF
- How to run Qwen 3 32B on Apple M3 Ultra
- CompactFlash Boot Drive for Windows 98 Retro PC: The 2026 Transcend CF133 Recipe
- How to Identify Your Motherboard: A Step-by-Step Guide
- Ryzen 5 5600G vs RTX 3060 12GB for Entry Local LLM Inference (2026)
- Samsung and SK Hynix Plan $590B Chip Push as Memory Prices Climb
- Sound BlasterX G6 for DOS and Win98 Retro Gaming: SBEMU and Real-Mode Audio
- Alienware AW3426DW Review: QD-OLED Ultrawide Gaming at $699
- Qwen 3.8 Open Weights: What Fits on a 12GB GPU
- Best Peripherals for a Modern Retro-PC LAN Party (2026)
- Intel Kills BigDL: The Local-LLM Path Forward in 2026
- Best Budget GPU for Local LLM Inference in 2026
- Revive a Dead Payphone with a Raspberry Pi Zero 2 W: Full Build Walkthrough
- Gemma 4 31B Uncensored on a 12GB RTX 3060: What Fits, How Fast
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090