ARCTIC P8 (5 Pack) - 80 mm Case Fan, Pressure-optimised, Quiet Motor, Computer, Fan Speed: 3000 RPM - Black
Bottom line: The ARCTIC P8 (5 Pack) - 80 mm Case Fan, Pressure-optimised, Quiet Motor, ($15.99 on Amazon as of 2026-11-21 17:28 UTC): Static-pressure blade design suits 80mm heatsinks and radiators, not just open case vents; main trade-off: 3-pin connector only, so speed control needs motherboard voltage or a resistor cable.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Static-pressure blade design suits 80mm heatsinks and radiators, not just open case vents
- ✓ 3000 RPM ceiling pushes 23.4 CFM (39.76 m3/h) through restrictive retro chassis grilles
- ✓ Rated 0.3 Sone at full 3000 RPM, quiet for an 80mm fan spinning that fast
- ✓ Fluid dynamic bearing with sealed oil capsule resists lubricant leakage over long runtimes
Cons
- ✗ 3-pin connector only, so speed control needs motherboard voltage or a resistor cable
- ✗ No PWM header support limits fine-grained RPM curves in modern BIOS setups
- ✗ 23.4 CFM is modest, so high-heat builds may need multiple P8s in series
- ✗ 3000 RPM fixed-speed operation is audible in a quiet room without undervolting
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for ARCTIC P8 (5 Pack) - 80 mm Case Fan, Pressure-optimised, Quiet…, so this read rests on the manufacturer's listed specs and the current price in the retro cpu coolers & fans category (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Static-pressure blade design suits 80mm heatsinks and radiators, not just open case vents"; the main trade-off is "3-pin connector only, so speed control needs motherboard voltage or a resistor cable". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- OPTIMISED FOR STATIC PRESSURE: The fan guarantees extremely efficient cooling, even with increased air resistance, therefore, the P8 is particularly suitable for use on heatsinks and radiators
- HIGH QUALITY BEARING: Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved
- LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
- REDESIGNED FAN BLADES: The P8 fan features completely redesigned fan blades and is optimised for high static pressure
- TECHNICAL DATA: Fan speed: 3000 RPM, Airflow: 23.4 CFM/39.76 m³/h (@ 3000 RPM), Noise Level: 0.3 Sone (@ 3000 RPM), Pin: 3-pin
Full Specifications
| Brand | ARCTIC |
|---|---|
| Color | Black |
| Model | ACFAN00153A |
| Voltage | 12 Volts |
| Wattage | 1.68 watts |
| Material | Metal |
| Unit Count | 5.0 Count |
| Noise Level | 0.3 Sones |
| Part Number | ACFAN00153A |
| Material Type | Metal |
| Cooling Method | Fan |
| TECHNICAL DATA | Fan speed: 3000 RPM, Airflow: 23.4 CFM/39.76 m³/h (@ 3000 RPM), Noise Level: 0.3 Sone (@ 3000 RPM), Pin: 3-pin |
| Number of Items | 5 |
| Air Flow Capacity | 23.4 Cubic Feet Per Minute |
| Compatible Devices | Desktop |
| Included Components | P8 (5 Pack) |
| HIGH QUALITY BEARING | Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved |
| Power Connector Type | 3-Pin |
| Warranty Description | 6 year limited warranty |
| REDESIGNED FAN BLADES | The P8 fan features completely redesigned fan blades and is optimised for high static pressure |
Benchmark data for other processors
Ready to buy?
ARCTIC P8 (5 Pack) - 80 mm Case Fan, Pressure-optimised, Quiet Motor, Computer, Fan Speed: 3000 RPM - Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- AVX-512 Speeds Linux Software RAID Up to 41% — What It Means for Your Homelab NAS
- Best SATA, IDE & CompactFlash Adapters for Retro PC Data Recovery in 2026
- Llama 3.3 70B: Dual RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- Raspberry Pi 5 16GB Ships — Is the Pi 4 8GB Still Worth It?
- Best Gaming GPUs for 1080p High-Refresh Rate (2026)
- RTX 5080 vs RX 7900 XTX: Which GPU Wins in 2026?
- GameNative Unlocks Up to 100 FPS PC Gaming on Android
- Modern Sound Cards on Retro Rigs: The Sound BlasterX G6 for Win9x and DOS Audio
- Perplexity's Local-or-Cloud Router: What Hardware Runs the Local Half
- RTX 4090 vs RTX 5090 for Local LLM Inference: 24 GB vs 32 GB
- Data Center CPU Demand Surge: AI Agents and the GPU Ratio Shift
- LoRA Fine-Tuning Small LLMs on an RTX 3060 12GB in 2026
- Rescue Your Retro PC's Data Before the IDE or SATA Drive Dies
- T9 Keyboard for Your Smartphone: 2026 Maker's Guide
- Running Mistral's New OCR Model Locally on a 12GB GPU
- Replace a Dying IDE Drive With CompactFlash in a Win98 Retro PC
- Linux 7.3: 'Flatten the Pick' Scheduler Gains for Gaming
- Best Budget GPU for Local 12B–14B LLM Inference: Why the RTX 3060 12GB Still Wins
- Heterogeneous GPU Weighting and Layer Splitting: Mixed-GPU LLM Inference on Consumer Hardware
- Raspberry Pi 4 8GB Local LLM Throughput in 2026
- Intel Arc Pro B60 Gaming Performance: 2025 Benchmarks
- Best Streaming Microphone for Twitch in 2026
- Best Retro PC Storage Adapters in 2026: IDE, SATA & CompactFlash Picks
- Best Parts for an Always-On Local LLM Server in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090