GeeekPi
GeeekPi Case with PWM Fan for Raspberry Pi 4
Bottom line: The GeeekPi Case with PWM Fan for Raspberry Pi 4 ($17.99 on Amazon as of 2026-10-07): Bundle covers case, 18W 5V 3.6A USB-C PSU, 4010 PWM fan, 4 heatsinks and card reader; main trade-off: fits only Raspberry Pi 4 Model B - no Pi 5, Pi 3 or Zero support.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Bundle covers case, 18W 5V 3.6A USB-C PSU, 4010 PWM fan, 4 heatsinks and card reader
- ✓ PWM fan speed is adjustable natively in Raspberry Pi OS or via GPIO scripts
- ✓ Snap-together three-part shell needs no screws to assemble
- ✓ GPIO header, USB ports and microSD slot all stay accessible with the case closed
- ✓ Power supply carries TUV and RoHS certification and has an inline on/off switch
Cons
- ✗ Fits only Raspberry Pi 4 Model B - no Pi 5, Pi 3 or Zero support
- ✗ Four aluminum heatsinks must be applied by hand and are not pre-mounted
- ✗ Snap-fit shell with no screws is less secure than a bolted enclosure
- ✗ Small 40mm fan is audible at full speed until you tune the PWM curve
Manufacturer description
About this item Easy-to-install Raspberry Pi 4 case - The Raspberry Pi 4 case consists of three parts and there is no need to screw the case, just cover them tightly; It can be access to all ports of Raspberry Pi Board, such as GPIO port, USB port, Card slot. Better Cooling System – Raspberry Pi 4 quite cooling fan 40x40x10cm and 4pcs aluminum heatsinks are good for heat dissipation of Raspberry Pi 4 Model B. This fan can be adjusted by PWM. The official Raspberry Pi OS supports the speed adjustment function. You can also control the speed of the fan by controlling the GPIO pin through a…
SpecPicks Verdict
SpecPicks scored GeeekPi Case with PWM Fan for Raspberry Pi 4 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. GeeekPi's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Easy-to-install Raspberry Pi 4 case - The Raspberry Pi 4 case consists of three parts and there is no need to screw the case, just cover them tightly; It can be access to all ports of Raspberry Pi Board, such as GPIO port, USB port, Card slot.
- Better Cooling System – Raspberry Pi 4 quite cooling fan 40x40x10cm and 4pcs aluminum heatsinks are good for heat dissipation of Raspberry Pi 4 Model B. This fan can be adjusted by PWM. The official Raspberry Pi OS supports the speed adjustment function. You can also control the speed of the fan by controlling the GPIO pin through a third-party program.
- 18W 5V 3.6A Power Supply for Raspberry Pi 4 Model B - With ON/Off switch, it's convenient for you to power on and power off your Raspberry Pi 4; With Professional Certification TUV, RoHS Certification;
- 1m Micro cable for Raspberry Pi 4 Model B – High speed 4K cable 60P; 1m gold-plated cable.
- Package Includes 1x Case for Raspberry Pi 4 Model B, 1x 5V 3.6A USB-C Power Supply, 1x 4010 Cooling fan, 1x Cable (1m), 1x Adapter, 1x USB Card Reader, 1x 4pcs heatsinks, 1x Screw driver
Full Specifications
| UPC | 703501204228 |
|---|---|
| ASIN | B07Y7W3GFH |
| Brand | GeeekPi |
| Color | Black |
| Amperage | 3.6 Amps |
| Material | Aluminum |
| Unit Count | 1.0 Count |
| Form Factor | [Unique Form-Factor] |
| Manufacturer | GeeekPi |
| Model Number | K-0400 |
| Input Voltage | 5 Volts |
| Maximum Power | 18 Watts |
| Connector Type | USB-C, Micro HDMI |
| Output Current | 3.6 Amps |
| Output Voltage | 5 Volts |
| Output Wattage | 18 Watts |
| Mfr Part Number | K-0400 |
| Specification Met | RoHS |
| Enclosure Material | Aluminum |
| Connector Type Used on Cable | USB-C, Micro HDMI |
| Full listing title | GeeekPi Case with PWM Fan for Raspberry Pi 4, 18W 5V 3.6A USB-C Power Supply for Raspberry Pi 4, Heatsinks, USB Card Reader, Adapter for Raspberry Pi 4 8GB/4GB/2GB |
Ready to buy?
GeeekPi Case with PWM Fan for Raspberry Pi 4, 18W 5V 3.6A USB-C Power Supply for Raspberry Pi 4, Heatsinks, USB Card Reader, Adapter for Raspberry Pi 4 8GB/4GB/2GB is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Open-WebUI + Ollama on RTX 3060 12 GB: A 2026 Self-Hosted Stack
- Imaging Vintage IDE Drives in 2026: A CompactFlash + USB Adapter Workflow
- AI-Driven Sound Blaster Driver Recovery on Win98 in 2026
- ComfyUI on an RTX 3060 12GB: Flux and SDXL Speeds in 2026
- Best SSD for PS5 Storage Expansion Under $100 (2026)
- When Gemini Debugs Your Linux Boot: Agentic Sysadmin on a Local RTX 3060 Rig
- Ryzen 5 5600G vs Intel i7-9700K for Budget Gaming in 2026
- AMD Ryzen AI Max+ 395 Box (Strix Halo) for Local LLMs: What 128GB Unified Memory Actually Buys You
- Best SATA SSD for a Retro Windows XP or 98 Build (2026)
- Two RTX 3060 12GB vs One Bigger GPU for Local 70B Models
- Gemma 4 31B-IT on a 12GB RTX 3060: What Fits, What Offloads, How Fast
- Claude Sonnet 5: What Shipped and What It Means for Local Rigs
- Ryzen 5 2600 vs Ryzen 7 5800X for CPU-Only Qwen3 30B-A3B (2026)
- Best SATA, IDE & CompactFlash Adapters for Retro PC Data Recovery in 2026
- Best PC Controllers for Cross-Platform Gaming in 2026
- How to run DeepSeek-R1 32B on Arc B580
- Best Budget Streaming Gear in 2026: 5 Picks to Go Live Cheap
- Best Mouse Pad for Office Productivity and Long Hours (2026)
- From AWE32 to BlasterX G6: The Sound Blaster Lineage for Modern Retro Rigs
- Best CPU Cooler for Ryzen 9 3900X Overclocking in 2026
- AIO vs Air on a Ryzen 7 5800X: Corsair ML240L vs Noctua NH-U12S
- Best Parts for a Local LLM Box That Also Runs Jellyfin in 2026
- Best Gaming Monitors in 2026: 1080p, 1440p, and 4K Picks
- Old RAM Identification: Decode Part Numbers & Specs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090