Patriot P300 M.2 PCIe Gen 3 x4 256GB Low-Power Consumption SSD
Bottom line: The Patriot P300 M.2 PCIe Gen 3 x4 256GB Low-Power Consumption SSD ($52.99 on Amazon as of 2026-10-20 16:15 UTC): Sequential reads up to 1,700MB/s - roughly 3x a SATA SSD; main trade-off: 256GB fills fast; one modern AAA game can eat half of it. Another in-stock pick with the same 256GB PCIe 3.0 NVMe: the XPG S40G 256GB RGB 3D NAND PCIe Gen3x4 NVMe 1.3…, $51.99 on Amazon as of (price may vary).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Sequential reads up to 1,700MB/s - roughly 3x a SATA SSD
- ✓ 260K IOPS 4K random write keeps small-file work snappy
- ✓ 5-year warranty, long for an entry-tier NVMe drive
- ✓ LDPC plus NANDXtend ECC extends NAND flash lifespan
Cons
- ✗ 256GB fills fast; one modern AAA game can eat half of it
- ✗ Gen 3 x4 only - leaves Gen 4 and Gen 5 board speed unused
- ✗ 1,100MB/s write trails the 1,700MB/s read noticeably
- ✗ Mid-tier drive by Patriot's own positioning, not a flagship
Manufacturer description
The Patriot P300 256GB is a PCIe Gen 3 x4 NVMe M.2 drive built for people who want to move a boot volume off SATA without paying Gen 4 prices. Patriot rates it at sequential reads up to 1,700MB/s and writes up to 1,100MB/s, with 4K aligned random writes reaching 260K IOPS - enough headroom to cut Windows boot times and shorten level loads compared with a 2.5-inch SATA SSD capped near 550MB/s. Endurance and data integrity get real attention here: the P300 carries end-to-end data path protection, SmartECC, and LDPC with Patriot's NANDXtend ECC to stretch NAND flash lifespan, plus thermal…
SpecPicks Verdict
SpecPicks scored Patriot P300 M.2 PCIe Gen 3 x4 256GB Low-Power Consumption SSD using a rating × review-volume × price-fit model applied to published specs and reviews across the ssds & storage category. Patriot Memory's ssds & storage lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for ssds & storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How fast is the Patriot P300 256GB?
Patriot rates it at sequential reads up to 1,700MB/s and sequential writes up to 1,100MB/s, with 4K aligned random writes up to 260K IOPS. That read figure is about three times what a SATA III SSD can deliver.
Will the P300 work in my PCIe Gen 4 motherboard?
It is a PCIe Gen 3 x4 NVMe M.2 drive, and Gen 4 slots are backward compatible, so it will run at its Gen 3 speeds. Confirm your board has an M.2 slot keyed for NVMe rather than SATA-only before buying.
What warranty does Patriot include?
Patriot lists a 5-year warranty on the P300. Check the product listing for current terms and registration requirements in your region.
Is 256GB enough capacity for a boot drive?
It is workable for Windows plus productivity apps and a couple of games. Windows 7 through 11 are supported. If you install large modern titles, plan on a second drive for your game library.
Does the P300 overheat in a laptop or small case?
It includes thermal throttling technology to protect the controller under sustained load, and Patriot markets the drive on low power consumption, which is why it is commonly used for notebook and small-form-factor upgrades.
Key Features
- Capacity 256GB
- Built in end-to-end data path protection, SmartECC technology, and Thermal throttling technology
- Supports LDPC and NANDXtend ECC technology to extend the lifespan of NAND Flash
- SEQ Performance Read up to 1,700MB/s, Write up to 1,100MB/s; 4K Aligned Random Write: up to 260K IOPs
- 5 Year Warranty; O/S Supported: Windows 7/8.0/8.1/10/11
Full Specifications
| Brand | Patriot Memory |
|---|---|
| Color | Black |
| Model Name | P300P256GM28 |
| Read Speed | 1700 Megabytes Per Second |
| Unit Count | 1.0 Count |
| Form Factor | laptop |
| Media Speed | 1100 megabits_per_second |
| Model Number | P300P256GM28 |
| Hard-Drive Size | 256 GB |
| Mfr Part Number | P300P256GM28 |
| Number of Items | 1 |
| Special Feature | Shock Resistant |
| Hardware Platform | PC |
| Installation Type | Internal Hard Drive |
| Compatible Devices | Desktop |
| Enclosure Material | Nand Flash Memory |
| Additional Features | Shock Resistant |
| Hard Disk Interface | NVMe |
| Hard Disk Description | Solid State Drive |
| Hard Disk Form Factor | 2.5 Inches |
Ready to buy?
Patriot P300 M.2 PCIe Gen 3 x4 256GB Low-Power Consumption SSD is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Related SSDs & Storage
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- LM Studio vs Jan.ai vs Ollama on an RTX 3060 12GB: Which Local Runner Wins?
- Kimi K3 Costs $10.57 per Agentic Task: Is Local Cheaper?
- Self-Hosting Immich on a Raspberry Pi 4 8GB: Power and Performance
- Inkling 975B Open Weights: What a Frontier Speech Model Means for Local Rigs
- Best SATA SSDs for Older PCs and Retro Builds in 2026
- Noctua NH-U12S vs CoolerMaster ML240L: Air or AIO for 5800X
- Samsung SSD Brand Guide 2026: Every Drive Worth Buying
- AMD Instinct MI300X vs Consumer GPUs: What Local AI Builders Should Buy in 2026
- Voodoo 5 6000 FSAA: The Feature That Never Engaged
- Period-Correct Pentium III + GeForce 4 Ti Build for 2001-2003 Gaming
- Asus Prime Z890-P WiFi Review: Built for Core Ultra 200S
- Modern Retro Console Mods: 2026 Upgrade Guide
- Best Streaming Gear for a $500 Twitch Starter Setup in 2026
- Raspberry Pi Home Automation Projects: A 2025 Starter Guide
- AI Bug-Hunters Are Flooding Security Reports: Running a Local Code-Audit LLM on an RTX 3060
- Best Gaming Headsets and Streaming Mics for Console + PC (2026)
- Best Streaming Setup Under $400: G502 + QuadCast 2 S + Cam Link 4K vs the Bundle Alternatives
- HyperX QuadCast 2 vs Blue Yeti: Best Streaming Mic in 2026
- Raspberry Pi 4 vs Pi Zero W: Which Board for Your First Project?
- Best Retro PC Building Tools & Adapters 2026: The Kit That Ships the Build
- Is the Ryzen 7 7800X3D Worth It in 2026?
- Jetson Orin Nano Super vs Hailo-8 AI HAT+: Which Edge-AI Path Is Right for You?
- 9800X3D + RTX 5070 Ti PC Build 2026: 1440p High-Refresh
- Best GPU for 1440p 144Hz Esports in 2026: RTX 3060 Ventus Sweet Spot
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090