cablecc
Cablecc Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop
Bottom line: The Cablecc Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard: Includes a 70x60x9.5mm enclosure, not just a bare adapter board; main trade-off: accepts mSATA SSDs only, not M.2 or 2.5in SATA drives.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Includes a 70x60x9.5mm enclosure, not just a bare adapter board
- ✓ JM20330 bridge chip handles mSATA-to-IDE translation
- ✓ Fits standard 2.5in 44-pin IDE laptop drive bays
- ✓ 9.5mm height matches common notebook drive slots
Cons
- ✗ Accepts mSATA SSDs only, not M.2 or 2.5in SATA drives
- ✗ 50mm half-height mSATA modules only, so full-size cards may not fit
- ✗ mSATA SSD is sold separately, adding to total cost
- ✗ PATA 44-pin interface caps throughput far below the SSD's native speed
Manufacturer description
Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop50mm (1.8 inches) MSATA SSD to 2.5 inches Notebook IDE Adapter with case.This adapter using JM20330 Serial ATA Bridge Chip.Case Size:70mm x 60mm X 9.5mmUsed with MSATA SSD ONLY!
SpecPicks Verdict
SpecPicks scored Cablecc Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard… using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. cablecc's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop
- 50mm (1.8 inches) MSATA SSD to 2.5 inches Notebook IDE Adapter with case.
- This adapter using JM20330 Serial ATA Bridge Chip.
- Case Size:70mm x 60mm X 9.5mm
- Used with MSATA SSD ONLY!
Full Specifications
| Brand | cablecc |
|---|---|
| Color | Green |
| Case Size | 70mm x 60mm X 9.5mm |
| Unit Count | 1 Count |
| Model Number | SA-111 |
| Mfr Part Number | SA-111 |
| Number of Items | 1 |
| Hardware Platform | Laptop |
| Compatible Devices | Laptop |
| Enclosure Material | Metal, Plastic |
| Hardware Interface | IDE |
| Hard Disk Form Factor | 2.5 inches |
| Item Dimensions L x W x H | 2.76"L x 2.36"W x 0.37"H |
| Supported Devices Quantity | 1 |
Ready to buy?
Cablecc Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Storage Adapters
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- First-Time CPU Delidding: What to Expect and How to Get It Right
- Building a Local LLM Workstation on a Raspberry Pi 5 + Ryzen 7 5800X Hybrid
- CompactFlash as an IDE Hard Drive: Silent, Solid-State Storage for Win98 & DOS Builds
- vLLM vs llama.cpp on a 12GB GPU: Which Serves Local LLMs Faster?
- Qwen-Audio-3.0-TTS-Plus Tops the Speech Arena: Run It Locally on an RTX 3060?
- Watching a Z80 Live From a Raspberry Pi RP2350
- CompactFlash as a Win98 Hard Drive: IDE Adapter Setup Guide
- Aider vs Cline vs Cursor for Local Coding on a 12GB GPU (2026)
- How to run Llama 3.1 8B on Apple M3 Ultra
- AMD Ryzen AI Max for Local LLMs: What the Specs Mean
- Imaging Vintage Hard Drives in 2026: SATA/IDE-to-USB Adapters Compared (FIDECO vs Unitek vs Vantec)
- CompactFlash as an IDE Hard Drive for Your Win98 Retro Build
- RTX 5090 AI TOPS: What the Official Number Means
- Revive an Old Payphone with a Raspberry Pi Zero 2W
- NVIDIA Nemotron 3 Ultra: What It Takes to Run Locally
- Best Gaming Mouse for FPS Esports in 2026 (Tournament-Tested Picks)
- What Is AI? A Practical 2026 Guide for Makers
- Ryzen AI Max 400 Gorgon Halo vs RTX 3060 for Local LLMs
- Best Budget Build for Local LLMs in 2026: How Far a Ryzen 5 5600G + RTX 3060 Gets You
- 3D Printed Glow-Spike Bracelet: Adafruit Builder's Guide 2026
- Best Raspberry Pi Projects for College Students in 2026: 8 Builds on a Pi 4 8GB
- Building a MAME Fighting Setup: Fight Stick + CF Storage for an Arcade Corner
- 1998 3dfx Voodoo2 SLI Build Guide: Period-Correct Glide Gaming with a CompactFlash Boot Drive
- Noctua NH-U12S vs DeepCool AK620 vs ML240L: Best Cooler for a Ryzen 7 5800X
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090