SUPERBAT SMA Male to BNC Male Cable 10ft + 5pcs RF Coax Adapter Kit SMA to BNC Cable SMA BNC Adapter Cable Kit for Scanner Antennas/Wireless LAN Devices/Wi-Fi Radios External Antenna etc
Bottom line: The SUPERBAT SMA Male to BNC Male Cable 10ft + 5pcs RF Coax Adapter Kit: Ships with 5 RF adapters covering SMA/BNC male and female in every combination; main trade-off: RG58a/u has higher loss than RG8 or LMR-400 on long UHF/microwave runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Ships with 5 RF adapters covering SMA/BNC male and female in every combination
- ✓ 10ft (3m) RG58a/u run reaches a roof or window-mounted antenna from the desk
- ✓ 50 Ohm impedance matches SDR dongles, scanners, and handheld transceivers
- ✓ Rated for over 1000 mating cycles, so swapping antennas won't wear the ends out
Cons
- ✗ RG58a/u has higher loss than RG8 or LMR-400 on long UHF/microwave runs
- ✗ No right-angle adapter, so the connector sticks straight out of a handheld radio
- ✗ 50 Ohm only, so it is wrong for 75 Ohm video and cable-TV BNC gear
- ✗ 10ft is the only length offered, with no shorter option for benchtop use
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for SUPERBAT SMA Male to BNC Male Cable 10ft + 5pcs RF Coax Adapter Kit…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "Ships with 5 RF adapters covering SMA/BNC male and female in every combination"; the main trade-off is "RG58a/u has higher loss than RG8 or LMR-400 on long UHF/microwave runs". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- CABLE- Connector 1: SMA Male; Connector 2: BNC Male; Cable Length: 3m.
- Impedance: 50 Ohm; Cable Type:RG58a/u; >1000 times mating life time.
- Adapter:1pcs BNC Female to BNC Female Adapter,1pcs SMA Female to SMA Female Adapter,1pcs SMA Female to BNC Male Adapter,1pcs SMA Female to BNC Female Adapter,1pcs -BNC Female to SMA Male Adapter.
- This RF Coaxial cable kit addresses all your SMA-BNC needs: Whether it's SMA male/Female to BNC Male/Female or SMA to SMA.By using the adapter, you can turn the product into any SMA-BNC cable you need.
- The bnc to sma cable adapter kit is good for VHF amplifier, handheld transceivers, HT radio, microwave applications, SDR dongles, Handheld Radios, Scanner, Walkie Talkie Adapters etc.
Full Specifications
| Brand | Superbat |
|---|---|
| Color | RG58 |
| Model | SUPERBAT-SMA-BNC-10ft |
| Impedance | 50 Ohm; Cable Type:RG58a/u; >1000 times mating life time. |
| Cable Type | Coaxial |
| Item Shape | Round |
| Model Name | SUPERBAT SMA Male to BNC Male Cable |
| Unit Count | 1 Count |
| Item Length | 3 meters |
| Part Number | GP-KIT-AC-17 |
| Connectivity | Wireless, WiFi |
| Connector Type | Sma, Bnc |
| Number of Pins | 3 |
| Outer Material | Copper |
| Connection Type | Wireless |
| Number of Items | 7 |
| Connector Gender | Female, Male |
| CABLE- Connector 1 | SMA Male; Connector 2: BNC Male; Cable Length: 3m. |
| Compatible Devices | Router |
| Indoor Outdoor Usage | Indoor, Outdoor |
Ready to buy?
SUPERBAT SMA Male to BNC Male Cable 10ft + 5pcs RF Coax Adapter Kit SMA to BNC Cable SMA BNC Adapter Cable Kit for Scanner Antennas/Wireless LAN Devices/Wi-Fi Radios External Antenna etc is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- The Half-Life Mod Era That Built Modern Multiplayer: Counter-Strike, Day of Defeat, TFC, Natural Selection
- Qwen 3.6 27B on 16GB: RTX 5060 Ti 16GB vs RX 9060 XT 16GB by Quant (2026)
- RTX 4090 AI TOPS in 2026: What the Number Means
- Microsoft + Nvidia Agent PCs vs a DIY RTX 3060 12GB Local-Agent Box
- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic 2026
- Claude Sonnet 5 Closes the Opus Gap: When Local Still Wins
- Best SSD for a Steam Deck or ROG Ally Upgrade (2026)
- Intel Arc Stable Diffusion Benchmark: A770, B580 & B60 (2025)
- Build a Live ADS-B Flight Tracker on a Raspberry Pi 4 in 2026
- Best Streaming Setup Under $400: G502 + QuadCast 2 S + Cam Link 4K vs the Bundle Alternatives
- Imaging a vintage IDE hard drive with a USB adapter in 2026
- GPT-5.6 Sol Reportedly Cracks a 30-Year Statistics Conjecture in 90 Minutes
- Dual Radeon AI PRO R9700 Workstation: 64 GB Local LLM Build
- Best Internal SSD for Gaming PC Build in 2026
- Bilingual Voice Agents: Frontier ASR on Code-Switched Speech
- The Best Retro Game Emulators for Mac in 2026
- Best Sim Racing Gear for PC in 2026: 5 Picks Tested by Spec
- Best GPU for Stable Diffusion and Local Image Generation in 2026
- RTX 3060 12GB Local LLM Guide: Which Models Actually Fit (2026)
- Claude Sonnet 5 Costs ~$2.29/Task: When an RTX 3060 Rig Breaks Even
- Best CPU for Gaming 2026: Price-to-Performance Guide
- AI-Driven Driver Install on Windows 98: TNT2, Voodoo3, and SoundBlaster Live! Walked by Claude
- 1440p Gaming PC Build 2026: Cost, Parts, FPS
- Self-Hosted Jellyfin on a Raspberry Pi 4 8GB: What 1080p Transcoding Really Costs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090