Skip to main content
Thermal Pad, 200x200x2mm, Highly Efficient 6.0 W/mK, Insulated Heat Resistant Silicone Pad for IC SSD CPU GPU Heat Sink LED Cooling
AIYUNNI

Thermal Pad, 200x200x2mm, Highly Efficient 6.0 W/mK, Insulated Heat Resistant Silicone Pad for IC SSD CPU GPU Heat Sink LED Cooling

Bottom line: The Thermal Pad, 200x200x2mm, Highly Efficient 6.0 W/mK, Insulated Heat: Rated 6.0 W/mK thermal conductivity for silicone gap filling; main trade-off: only one thickness (2mm); thinner gaps need a different pad.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Rated 6.0 W/mK thermal conductivity for silicone gap filling
  • ✓ Large 200x200mm sheet yields many custom-cut pads
  • ✓ Electrically insulating, safe against exposed traces
  • ✓ Rated -40 to 200 C without melting
  • ✓ Soft, compressible silicone conforms to uneven surfaces

Cons

  • ✗ Only one thickness (2mm); thinner gaps need a different pad
  • ✗ Too thick for direct CPU/GPU die-to-cooler contact
  • ✗ Cutting precise small pieces takes time and a sharp blade
  • ✗ No adhesive backing mentioned; relies on heatsink pressure

Manufacturer description

The AIYUNNI Thermal Pad is a 200x200x2mm sheet of silicone gap filler rated at 6.0 W/mK thermal conductivity. It sits in the air gap between a hot component and its heatsink or metal case, so heat moves into the cooler instead of building up around the chip. One large sheet gives you room to cut many custom pieces. Trim strips for GPU memory and VRMs, squares for an M.2 SSD heatsink, or pads for a laptop, set-top box, DVD player, motor controller or power LED board. The silicone is soft and elastic, so it presses into uneven surfaces that a rigid shim would not fully contact. The pad is…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Thermal Pad, 200x200x2mm, Highly Efficient 6.0 W/mK, Insulated Heat…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Rated 6.0 W/mK thermal conductivity for silicone gap filling"; the main trade-off is "Only one thickness (2mm); thinner gaps need a different pad". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How big is the AIYUNNI thermal pad and can I cut it?

The sheet is 200x200mm and 2mm thick. You can cut it to any shape with scissors or a hobby knife to fit GPU memory, VRMs, SSDs or other components.

What is the thermal conductivity of this pad?

AIYUNNI rates it at 6.0 W/mK. Pads fill gaps between a component and its heatsink; thermal paste is still the usual choice for a bare CPU or GPU die.

Is the pad safe to place on circuit boards and traces?

Yes. The silicone is electrically insulating and anti-static, so contact with electrical traces will not short them, according to the manufacturer.

What temperature range can it handle?

The manufacturer rates it for -40 to 200 C and says it will not melt in that range, which covers typical PC, laptop and LED operating temperatures.

How do I know if 2mm is the right thickness?

Measure the gap between the component and heatsink, for example with a caliper or the original pad. Use 2mm only if the gap is about 2mm. A pad that is too thick can stop the cooler from seating properly.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • EXCELLENT THERMAL CONDUCTIVITY - Upgraded thermal silica gel material with 6.0 W/mK thermal conductivity, our thermal pad greatly improve the heat transfer between the electronic elements and effectively cool the temperature down in seconds.
  • SUPER RELIABLE & DURABLE - High temperature performance in -40 ℃ - 200 ℃ will not melt, non-toxic, odorless, anti-corrosion, wear resistant, anti-static, fire retardant, compression, good insulation, contact with any electrical traces wouldn’t result in damage of any sort.
  • EASY & CONVENIENT TO USE - Dimension 200x200x2mm, the thermal pads can be cut freely according to your needs, perfect to filled contact surfaces gap, a great assistant for both beginners and professionals.
  • WIDELY APPLICATION - Perfectly replaces traditional heatsink compound grease paste, great for Control board, motor, electronics, CPU, GPU, Heat Sink, Power LED, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC SMD DIP and any cooling modules
  • We Committed To Provide Superior Thermal Pads, Easy To Install, Feel Free To Contact Us If There Is Any Issue With Our Thermal Pads.

Full Specifications

BrandAIYUNNI
ModelAIYUNNI
CPU SocketUniversal
Dimensions200x200x2mm
Unit Count1 Count
Part NumberAIYUNNI-140
Mounting TypePanel Mount or Chassis Mount
Cooler Heatsink MaterialAluminum or Copper
Item Dimensions L x W x H7.87"L x 7.87"W x 0.08"H

Benchmark data for other processors

Ready to buy?

Thermal Pad, 200x200x2mm, Highly Efficient 6.0 W/mK, Insulated Heat Resistant Silicone Pad for IC SSD CPU GPU Heat Sink LED Cooling is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Retro CPU Coolers & Fans

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →