Thermal Pad,100x100x3mm Highly Efficient Thermal Conductivity 6.0 W/mK,Heat Resistant Silicone Thermal Pads for Electronics Laptop Heatsink CPU GPU SSD IC LED Cooler
Bottom line: The Thermal Pad,100x100x3mm Highly Efficient Thermal Conductivity 6.0 ($9.98 on Amazon as of 2026-10-06): 6.0 W/mK rated conductivity for a silicone gap-filler pad; main trade-off: single 3mm thickness; won't suit 0.5-2mm gaps without swapping pads.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 6.0 W/mK rated conductivity for a silicone gap-filler pad
- ✓ 100x100mm sheet cuts into many VRAM, VRM or SSD strips
- ✓ Rated for -40 to 200 C without melting, per the listing
- ✓ Electrically insulating and anti-static, safe near exposed traces
Cons
- ✗ Single 3mm thickness; won't suit 0.5-2mm gaps without swapping pads
- ✗ Too thick to replace paste on a bare CPU or GPU die
- ✗ Shore hardness and compression rate are not published
- ✗ No independent test data backs the 6.0 W/mK claim
Manufacturer description
The AIYUNNI Thermal Pad is a 100x100x3mm silicone sheet rated at 6.0 W/mK thermal conductivity. It fills the gaps between hot components and a heatsink, so it suits jobs where thermal paste is too thin to bridge the space. You cut it to size. A single sheet can cover GPU VRAM and VRM strips, M.2 SSD controllers, laptop chipsets, power LEDs, set-top boxes and retro console or PC boards where the original pads have dried out and cracked. According to the listing, the material holds its form from -40 to 200 degrees C without melting. It is also electrically insulating and anti-static, so…
SpecPicks Verdict
SpecPicks scored Thermal Pad,100x100x3mm Highly Efficient Thermal Conductivity 6.0… using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. AIYUNNI's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What thickness is the AIYUNNI thermal pad?
It is 3mm thick on a 100x100mm sheet. Measure your existing pads or the component-to-heatsink gap before you buy, because pad thickness has to match the gap for the heatsink to seat properly.
What is the thermal conductivity of this pad?
AIYUNNI rates the pad at 6.0 W/mK. That figure comes from the manufacturer's listing, and no independent test results are provided.
Can I use it on a GPU's VRAM or an M.2 SSD?
Yes. The listing names CPU, GPU, SSD, IC and LED cooling as intended uses. Cut the sheet to the chip footprint, and first check that your card or heatsink calls for a 3mm pad rather than a thinner one.
Is the pad electrically conductive?
No. The listing describes it as insulating and anti-static, and says contact with electrical traces will not cause damage.
What temperatures can it handle?
The manufacturer rates it for -40 to 200 C without melting. For warranty or replacement terms, check the current Amazon product listing or contact the seller.
Key Features
- EXCELLENT THERMAL CONDUCTIVITY - Upgraded thermal silica gel material with 6.0 W/mK thermal conductivity, our thermal pad greatly improve the heat transfer between the electronic elements and effectively cool the temperature down in seconds.
- SUPER RELIABLE & DURABLE - High temperature performance in -40 ℃ - 200 ℃ will not melt, non-toxic, odorless, anti-corrosion, wear resistant, anti-static, fire retardant, compression, good insulation, contact with any electrical traces wouldn’t result in damage of any sort.
- EASY & CONVENIENT TO USE - Dimension 100x100x3mm, the thermal pads can be cut freely according to your needs, perfect to filled contact surfaces gap, a great assistant for both beginners and professionals.
- WIDELY APPLICATION - Perfectly replaces traditional heatsink compound grease paste, great for Control board, motor, electronics, CPU, GPU, Heat Sink, Power LED, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC SMD DIP and any cooling modules
- We Committed To Provide Superior Thermal Pads, Easy To Install, Feel Free To Contact Us If There Is Any Issue With Our Thermal Pads.
Full Specifications
| Size | 100x100x3mm 6.0 W/mK |
|---|---|
| Brand | AIYUNNI |
| Color | Blue |
| UnitCount | 1 |
| Manufacturer | AIYUNNI |
| ItemPartNumber | TP-01 |
Ready to buy?
Thermal Pad,100x100x3mm Highly Efficient Thermal Conductivity 6.0 W/mK,Heat Resistant Silicone Thermal Pads for Electronics Laptop Heatsink CPU GPU SSD IC LED Cooler is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- RTX 5080 vs RTX 5070: Which Blackwell GPU Should You Buy in 2026?
- Noctua NH-U12S vs ML240L RGB on a Ryzen 7 5800X
- Build a Fully Local PDF-to-Audiobook Pipeline on Jetson Orin Nano Super
- Build a 3D-Printed Cyberdeck Music Workstation on a Raspberry Pi 4
- How to run Qwen 3 32B on Apple M4 (2026)
- AI-Driven Driver Install on Win98 + WinXP: Vision-LLM Walks the Installer (Field Report)
- Build a Retro Emulation Cabinet Brain on a Pi 4 8GB in 2026
- Homelab Month One: Raspberry Pi 4 or a Ryzen 5 Mini-PC?
- Why Stock GPU Pastes Last Longer Than Aftermarket Ones
- Best Streaming Setup for PC Gamers in 2026: 5 Picks Under $500
- That Game Boy Clone Runs Too Fast — and the Fix Is a Clock Crystal
- Ryzen 7 5800X vs Core i7-9700K for 1080p Esports in 2026
- Best Upgrades to Revive an Old Gaming PC in 2026: 5 Picks
- Plug-and-Play Retro Consoles Compared: Genesis Mini vs SNES vs NES Classic
- AMD Ryzen AI Halo ($4K) vs a DIY RTX 3060 Local-LLM Rig
- Open-Source Linux Driver Lands for the ASUS ZenVision Lid OLED
- Best CPU for the RTX 3060 12GB (No Bottleneck) in 2026
- Using LLMs to Install Vintage GPU Drivers on Win98 and WinXP: A Field Report from Our Retro-Agent Fleet
- NVMe vs SATA for Gaming: WD Blue SN550 vs Crucial BX500 in 2026
- Best Wireless Keyboard for Office and Hybrid Work in 2026
- Best GPU for Qwen 3 14B (2026)
- Best Budget SSD for Gaming and PC Upgrades in 2026
- A 3D-Printed Switch Steering Wheel V2 Brings Adaptive Racing to More Players
- Best Mini PC for Local LLM Inference in 2026: Ryzen vs Apple vs Intel
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090