Skip to main content
BTF-LIGHTING WS2812B ECO RGB LED Strip,UL Listed,Individually Addressable,16.4FT 60LED/m 300Pixel DC5V 5050SMD,Alloy Wire Flexible 3M Tape for DIY Chasing Color Project IP65(No Adapter or Controller)
BTF-LIGHTING

BTF-LIGHTING WS2812B ECO RGB LED Strip

Bottom line: The BTF-LIGHTING WS2812B ECO RGB LED Strip: 300 individually addressable pixels over 16.4ft, 60 LED/m; main trade-off: no power supply included; DC5V 10A 50W needed separately.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 300 individually addressable pixels over 16.4ft, 60 LED/m
  • ✓ 24-bit color depth with 256 brightness levels per pixel
  • ✓ UL Listed with UL-approved wires and circuit boards
  • ✓ IP65 rating plus pre-applied 3M double-sided adhesive
  • ✓ 3-pin JST-SM connectors pre-installed on both ends

Cons

  • ✗ No power supply included; DC5V 10A 50W needed separately
  • ✗ No controller included, so budget for an ESP32 or SP-series
  • ✗ 5V only: DC12V or DC24V permanently destroys the strip
  • ✗ Cuts only every 50cm at solder joints, not per LED

Manufacturer description

BTF-LIGHTING's WS2812B ECO strip gives you 300 individually addressable pixels across 16.4 feet at 60 LEDs per meter, with each 5050SMD package carrying its own WS2812B IC for 24-bit color and 256 brightness levels. That per-pixel control is what separates this from analog RGB tape: you can run chasing, rainbow, and meteor effects down the strip rather than washing the whole run in one color. The ECO designation refers to alloy bonding wire instead of pure gold, which drops the price without changing the color depth or brightness resolution. The strip is UL Listed, using UL-approved wires…

SpecPicks Verdict

SpecPicks scored BTF-LIGHTING WS2812B ECO RGB LED Strip using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. BTF-LIGHTING's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does this LED strip come with a power supply and controller?

No. The package includes the WS2812B strip, a voltage compensation wire, and a 3-pin male connector only. BTF-LIGHTING recommends a DC5V 10A 50W supply for the 16.4ft 300-LED version, purchased separately along with a controller.

How many LEDs are on the 16.4ft strip?

300 LEDs at 60 LEDs per meter, and because each 5050SMD LED has its own embedded WS2812B IC, that equals 300 independently addressable pixels on a 10mm-wide white PCB.

Can I run this with WLED on an ESP32?

Yes. BTF-LIGHTING lists ESP32, ESP8266, WLED, Raspberry Pi, and Arduino UNO R3 among supported DIY platforms, plus SP803E/SP805E, BanlanX app controllers such as the SP107E, and industrial K1000C/K8000C units.

Where can I cut the strip?

Every 50cm at the marked solder joints. Each cut segment keeps its addressable behavior, and the pre-installed male and female 3-pin connectors let you reconnect sections in series or parallel.

Is it safe to use 12V with this strip?

No. It is a DC5V-only strip, and connecting DC12V or DC24V causes permanent damage. The strip itself is UL Listed with UL-approved wires and circuit boards, so match the supply voltage exactly.

Key Features

  • 【Individually Addressable LED Strip】 Fully programmable WS2812B ICs embedded in 5050SMD LEDs deliver true addressable RGB performance—each pixel independent with 24-bit color depth and 256 brightness levels for stunning dynamic effects: chasing, rainbow, meteor, and beyond. Plug-and-play ready with pre-installed 3-pin JST-SM connectors and separable power wires.
  • 【Smart Value Engineering】 BTF-LIGHTING's alloy wire WS2812B strips offer the same 24-bit color and 256-level brightness as pure gold-wire versions, but at a fraction of the cost. Achieve professional-grade dynamic effects—chasing, rainbow, meteor—with entry-level pricing. For premium applications, pure gold wire variants are also available.
  • 【UL Listed】UL-certified LED strip for guaranteed safety, featuring 3M double-sided adhesive, UL-approved wires and circuit boards.IP30/IP65 versions come with 3M double-sided adhesive for easy mounting; IP67versions require fastening clips (no adhesive included).
  • 【Parameter】Flexible and cuttable 16.4ft LED strip 300LEDs=300IC=300Pixle.10mm Width.White PCB. Cuttable every 50cm (at solder joints) for flexible customization.
  • 【Versatile Functions】Compatible with multiple controllers: DIY Projects (SP803E,SP805E,ESP32, ESP8266,WLED, Rasp Pi, UNO R3 etc.), Tuya APP (DR03W), BanlanX APP (SP630E/SP530E/SP611E/SP602E/SP608E/SP107E/SP105E etc.),industrial-grade (K1000C, K8000C, etc.). Choose the right controller per your project.Recommended power supply: DC5V 10A 50W (for 16.4FT 300LED strip).
  • 【Flexible Installation, Wide Application】 UL-certified male and female 3-pin connectors pre-installed on both ends enable easy series (daisy-chain) or parallel connections. Each LED is cuttable for custom lengths and shapes, supporting series or parallel configurations. Perfect for LED screens, video walls, advertising boards, commercial venues (hotels, KTVs, bars), and festive decorations (Christmas, weddings). Multiple IP ratings (IP30/IP65/IP67) available for diverse indoor applications.

Full Specifications

BrandBTF-LIGHTING
ColorWhite Ip65
StyleModern
ThemeIndoor LED Strip Lighting
Seasonsautumn, winter
Voltage5 volts
Wattage90 watts
OccasionChristmas, Halloween, New Year
Unit Count16.4 Feet
Form FactorStrip Lights
Item Length199.2 inches
Light ColorMulticolor
Model NumberWS2812B5M60LW65E
Power SourceCorded Electric
Material TypeSilicone Rubber
Product StyleModern
Control MethodApp
Controller TypeVoice Control
Item Dimensions5.91 x 3.94 x 0.59 inches
Number of Items1
Full listing titleBTF-LIGHTING WS2812B ECO RGB LED Strip,UL Listed,Individually Addressable,16.4FT 60LED/m 300Pixel DC5V 5050SMD,Alloy Wire Flexible 3M Tape for DIY Chasing Color Project IP65(No Adapter or Controller)

Ready to buy?

BTF-LIGHTING WS2812B ECO RGB LED Strip,UL Listed,Individually Addressable,16.4FT 60LED/m 300Pixel DC5V 5050SMD,Alloy Wire Flexible 3M Tape for DIY Chasing Color Project IP65(No Adapter or Controller) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related RGB & Lighting

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →