Anber-Tech HDMI to Component Converter with Scaler Function
Bottom line: The Anber-Tech HDMI to Component Converter with Scaler Function ($38.99 on Amazon as of 2026-11-20 11:17 UTC): Built-in scaler up- or down-converts HDMI to component at 1080p/60Hz; main trade-off: one-way only: cannot convert component back to HDMI.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Built-in scaler up- or down-converts HDMI to component at 1080p/60Hz
- ✓ Outputs YPbPr plus separate R/L RCA audio for older receivers
- ✓ Handles 480i through 1080p input, covering PS3, Xbox 360 and Switch
- ✓ Blue/red power LED signals whether HDMI input is locked
Cons
- ✗ One-way only: cannot convert component back to HDMI
- ✗ YPbPr output tops out at 1080p, 720p, 576p and 480p progressive modes
- ✗ Needs a true YPbPr component input, not standard yellow RCA composite
- ✗ Requires external power before the HDMI source is connected
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Anber-Tech HDMI to Component Converter with Scaler Function, so this read rests on the manufacturer's listed specs and the current price in the handheld consoles category (how we evaluate). Compare with similarly-priced alternatives in the handheld consoles category before committing. On the listing's own facts, the case for it is "Built-in scaler up- or down-converts HDMI to component at 1080p/60Hz"; the main trade-off is "One-way only: cannot convert component back to HDMI". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- HDMI to Component Converter: This HDMI to Component Converter can convert HDMI input to analog YPbPr video and R/L audio signal output. When used this product, Please power up it first. Please note that your TV has YPbPr (Component) Port, different from RCA Port.
- Built-in scaler engine, can easily Up-scales or Down-scales HDMI signal to Component. It can solve display problems when the source resolution is greater than the display resolution. HDMI(input) to YPbPr (output) 1080p scaler compatible with the Nintendo Switch/ Laptop /PS3 /PS4 /PS4 Pro /Roku /Amazon Fire TV /Blu-Ray DVD /HD Projectors /Xbox 360 /Xbox One /DVB receiver/Game Console etc.
- Support HDMI interface resolution 1080p/60Hz, 1080i/60Hz, 720p/60Hz,720i/60Hz, 576p/60Hz, 576i/60Hz, 480p/60Hz, 480i/60Hz; Support Ypbpr Component Output: 1080p/60Hz, 720p/60Hz, 576P/60Hz, 480p/60Hz.
- The HDMI port support MAX HDMI 1080P@60Hz resolution resource input. It is an solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DW and Projector factory conference room noise space and security concerns, data center control, information distribution presentation, school and corporate training environment.
- Using a 19+1 28AWG HDMI Cable. When the Power LED displays blue, it indicates that the HDMI input signal is normal; Red indicates abnormal HDMI signal. Use friendly, Easy to Use and Install in seconds, No need of setting, it can not be reversed to use. If you encounter product quality problems, Please first inform us that you will be compensated within 24 hours.
Full Specifications
| Brand | Anber-Tech |
|---|---|
| Interface | HDMI to Component Converter |
| Unit Count | 1 Count |
| Compatibility | PS4, PS3, Xbox, Switch |
| Material Type | Plastic |
| Interface Type | HDMI to Component Converter |
| Number of Pins | 24 |
| Number of Items | 1 |
| Audio Output Mode | Stereo |
| Compatible Devices | Laptop, Projector, Television |
| Number of Channels | 2 |
| Maximum Supply Voltage | 5 volts |
| Minimum Supply Voltage | 5 volts_of_direct_current |
| Full listing title | HDMI to Component Converter with Scaler Function, HDMI to YPbPr 5RCA RGB Scaler Adapter V1.4 with R/L Audio Output Support for MacBook TV Blu-Ray DVD PS4 DVD, PSP, Xbox 360,Amazon Fire TV |
Ready to buy?
HDMI to Component Converter with Scaler Function, HDMI to YPbPr 5RCA RGB Scaler Adapter V1.4 with R/L Audio Output Support for MacBook TV Blu-Ray DVD PS4 DVD, PSP, Xbox 360,Amazon Fire TV is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Handheld Consoles
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- AI-Driven Driver Hunting on WinXP: Using Vision LLMs to Install Audigy 2 ZS Without Internet
- Is the RTX 3060 12GB Still the Best Sub-$400 AI Card in 2026?
- Adafruit's Cyberdeck Raspberry Pi Music Workstation Guide Lands
- AI Bug-Hunting Exploded: Run a Local Vuln-Scanner LLM on 12GB VRAM
- STEPLA-1 8-Bit Hardwired CPU: 74-Series Logic Explained
- FLUX.2 Klein 4B for Halloween Art: RTX 3060 12GB vs RTX 5060 8GB
- Ryzen 5 5600G APU for Local LLM Inference in 2026: What You Can Actually Run
- Best AMD Ryzen 5000 CPUs for AM4 in 2026
- Best Storage for a Retro PC Build in 2026
- Best SSDs and Cloning Tools to Upgrade an Aging Gaming PC or Console in 2026
- Build a PiKVM V3 Device for Remote Server Management (2026)
- Build a Low-Power Pi Home Server with NVMe in 2026
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- Best Budget Build for Local LLMs in 2026: How Far a Ryzen 5 5600G + RTX 3060 Gets You
- xAI Open-Sources Grok-Build: Running Agentic Coding on Your Own GPU
- Viral: Hobbyists Are Tracking Every Plane With a $50 Raspberry Pi - Here Is What You Need
- Devin Maker Cognition Hits $26B: What a Capital-Backed Coding Agent Race Means for Local-LLM Builders
- GeForce 3 Ti 500 Build Guide: Period-Correct Win98 SE Rig for 2001-Era Gaming
- 3dfx Voodoo2 SLI on Windows 98 SE: Period-Correct Build, Glide Driver Setup, and Real Quake 3 Benchmarks
- Raspberry Pi Projects for Students (2025 Guide)
- Using Claude to Auto-Generate Period-Correct DOSBox-X Configs for 90s PC Games
- Qwen3.6-35B-A3B VRAM Optimization: Why Bigger Quants Win
- Best Budget PC Gaming Peripherals and Desk Setup in 2026
- Troubleshooting Voodoo 5 5500 PCI Driver Hangs on Windows 98 SE: Field Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090