10Gtek
10Gtek 10GBase-SR SFP+ LC Transceiver
Bottom line: The 10Gtek 10GBase-SR SFP+ LC Transceiver: Two 100% tested 10GBase-SR modules per pack, not a single-module listing; main trade-off: multimode 850nm only, so single-mode OS1/OS2 fiber runs need a different module.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Two 100% tested 10GBase-SR modules per pack, not a single-module listing
- ✓ Coded for Cisco, Meraki, UniFi, Fortinet, Mikrotik, Netgear, D-Link, Supermicro and TP-Link
- ✓ Under 1.05W draw per module keeps switch thermal and power budgets low
- ✓ DDM support lets you read optical levels and temperature from the switch CLI
Cons
- ✗ Multimode 850nm only, so single-mode OS1/OS2 fiber runs need a different module
- ✗ 300m ceiling applies to OM3/OM4; OM1 and OM2 cable drops that reach well short
- ✗ 0C to 70C commercial rating rules out unconditioned outdoor or industrial cabinets
- ✗ Third-party coding can trip unsupported-transceiver warnings on locked-down firmware
Manufacturer description
Bring 10 gigabit fiber to your switch stack without paying brand-name transceiver prices. This 10Gtek 10GBase-SR SFP+ module pack delivers 10GbE over multimode fiber at 850nm, reaching up to 300 meters on OM3/OM4 and working with 62.5um and 50um LC cables across OM1 through OM4 runs. The duplex LC connector and DDM support make it a straight swap for Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, Mikrotik, Netgear, D-Link, Supermicro, and TP-Link gear, so you can standardize on one module across a mixed switch fabric. Each module draws under 1.05 watts and is…
SpecPicks Verdict
SpecPicks scored 10Gtek 10GBase-SR SFP+ LC Transceiver using a rating × review-volume × price-fit model applied to published specs and reviews across the networking category. 10Gtek's networking lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for networking of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this work in my Cisco or Ubiquiti switch?
Yes. It is coded to match Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, and Ubiquiti UniFi UF-MM-10G, and 10Gtek also lists Fortinet, Mikrotik, Netgear, D-Link, Supermicro, and TP-Link compatibility. Confirm your exact switch model on the product listing before ordering.
How far can it actually run?
Up to 300 meters. It is a 10GBASE-SR 850nm multimode module that works with both 62.5um and 50um LC cables and supports OM1, OM2, OM3, and OM4 fiber. The full 300m figure applies to the higher-grade multimode types.
How many modules come in the package?
Two. The listing is a pack of 2, and 10Gtek states both modules are 100 percent tested before shipping.
Does it support DDM or DOM monitoring?
Yes, DDM is supported, so a compatible switch can report per-module optical and diagnostic data. It is also SFP MSA and IEEE 802.3ae compliant and fully hot-pluggable with ESD protection.
What warranty and support come with it?
10Gtek lists a 3-year warranty plus lifetime tech support on this pack. Check the product listing for current warranty terms and claim process before purchase.
Key Features
- 10GBASE-SR SFP+ to LC Optical 10 Gigabit Ethernet Fiber transceiver module, 10GbE Multimode SFP+(compatible with both 62.5um and 50um LC cables; supports OM1/OM2/OM3/OM4 fiber cables), Duplex LC connector, 850nm, DDM, up to 300m.
- [Wide Compatibility] Compatible with Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, Mikrotik, Netgear, D-Link, Supermicro, TP-Link and Other Open Switches.
- [Easy to Use] Easy installation, plug and play, fully hot-pluggable with ESD protection. Widely used in network switch, server, or NIC with SFP+ to a 10 Gigabit fiber channel network with multimode LC for Network Attached Storage(NAS), Storage Area Network(SAN), and High Performance Computing(HPC) applications.
- [Durable & Low Power Consumption] Adopt high quality alloy, the shell is strong and wear-resistant; Low power consumption(less than 1.05watt) and low EMI emission design. SFP MSA Compliant, IEEE 802.3ae Compliant. Operating Temperature: 0°C to 70°C.
- [What you Get] 2x 100% tested 10GBase-SR modules, 3-Year warranty and lifetime tech support.
Full Specifications
| Brand | 10Gtek |
|---|---|
| Weight | 10g |
| Compatibility | Switch |
| Package Dimensions | 3.78 x 2.05 x 0.67 inches |
| Full listing title | 10Gtek 10GBase-SR SFP+ LC Transceiver, 10G 850nm Multimode SFP Module, up to 300 Meters, for Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, TP-Link and More, Pack of 2 |
Ready to buy?
10Gtek 10GBase-SR SFP+ LC Transceiver, 10G 850nm Multimode SFP Module, up to 300 Meters, for Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, TP-Link and More, Pack of 2 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Networking
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- How to run Qwen 3 14B on Arc B580
- Qwen3 0.6B: Raspberry Pi 4 8GB vs Ryzen 5 5600G for Tiny-Model Hosts (2026)
- Sound Blaster G6 on a Modern Retro Build: When a USB DAC Beats an AWE32
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
- Best X870E Motherboards for the Ryzen 7 9800X3D in 2026
- FREENOVE Ultimate Starter Kit on Raspberry Pi 4 8GB: 30 Projects Tested for First-Time Makers and Robotics…
- Sound Blaster Audigy 2 ZS in 2026: The Last Great Win98/XP Sound Card Install Guide
- If Your Steam Deck Broke, Would You Buy Another?
- Gemma 4 31B Creative-Writing Finetunes on RTX 3060 12GB
- Build a Home AI Assistant on a Raspberry Pi 4 8GB in 2026
- Qwen 3.6 27B vs Sonnet 4.6: Local Agentic Benchmarks
- Is the RTX 3060 12GB Still the Best Budget GPU for 1080p Esports in 2026?
- Reve 2.0 Debuts at #2: Can You Run Competitive Image Models on an RTX 3060 12GB?
- Coral TPU for LLM Inference: What the Specs Really Say
- Best AM4 CPU for Streaming While Gaming: 5600G vs 5700X vs 5800X
- Best Webcam for Twitch Streaming Under $100 in 2026
- Flux.2-Klein Pipeline: Real-Time Webcam AI at 30 FPS
- Build a Self-Updating 24/7 FM Radio Station on a Raspberry Pi Zero W
- SATA SSD vs NVMe for a Ryzen 5 5600G Budget Build in 2026
- Best PC Game Streaming Gear in 2026: 5 Picks for Mic, Light & Capture
- RetroPie Handheld 3D Print Guide: Cases, Settings & Parts
- Qwen 3.6 27B with MTP: 2.5x Throughput on Local Hardware (Real Benchmarks)
- Raspberry Pi 4 8GB Local LLM Throughput in 2026
- Forza Horizon 6 Runs Surprisingly Well on Steam Deck — Here's What Players Are Reporting
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090