CableCreation Cat6 RJ45 Pass Through Connectors, 100-Pack Cat6 Modular Plug
Bottom line: The CableCreation Cat6 RJ45 Pass Through Connectors: 100-pack handles large cabling jobs and repeat installs; main trade-off: unshielded UTP only — no STP shielding for noisy runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 100-pack handles large cabling jobs and repeat installs
- ✓ Pass-through design seats each wire flush to the contact
- ✓ Transparent body lets you verify T568A/T568B order pre-crimp
- ✓ 3-prong gold-plated contacts for stable, low-resistance links
- ✓ Fits 24-26AWG solid or stranded UTP with standard crimpers
Cons
- ✗ Unshielded UTP only — no STP shielding for noisy runs
- ✗ Requires a pass-through crimper to trim protruding wires
- ✗ Rated Cat6/Cat5e only, not Cat6a or Cat7
- ✗ Exposed wire ends unless flush-cut cleanly after crimping
SpecPicks Verdict
SpecPicks scored CableCreation Cat6 RJ45 Pass Through Connectors using a rating × review-volume × price-fit model applied to published specs and reviews across the retro networking cards category. CableCreation's retro networking cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro networking cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【RJ45 Cat6/5e Connectors】100 pieces Rj45 cat6/5e connectors ideal for 24awg~26awg twisted pair solid and stranded cable, which can be used for almost all types of RJ45 crimping tools to make custom-length ethernet cables.
- 【Pass-through Design】Wires can be easily inserted through the connector so that the core attaches to the contact closer, the 3-prong gold plated contacts enhance connection stability.
- 【Easily Identify Wiring Order】The transparent body makes verifying the wire sequence(T568A and T568B) easier to reduce scrap and waste crimping. Provide you with a fast and effective method of crimping Cat5/6 connectors.
- 【Operating instructions】The wires can be passed directly through the RJ45 connector so that the twisted wire segments of each pair can fit more closely to the contacts, minus cutting off the excess wires,followed by crimping using crimping pliers.
- 【Portable and Reliable】100 RJ45 Connectors is small and portable for large projects or multiple installation scenarios. Designed for computers, hubs, routers, switches.
Full Specifications
| Brand | CableCreation |
|---|---|
| Cable Type | Ethernet |
| Connector Type | RJ45 |
| Special Feature | High Speed |
| Compatible Devices | Laptop |
Ready to buy?
CableCreation Cat6 RJ45 Pass Through Connectors, 100-Pack Cat6 Modular Plug is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Networking Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Started a Homelab a Month Ago — Is a Ryzen 5 5600G Enough?
- HyperX QuadCast 2 vs Blue Yeti: Best USB Mic for Streaming and Podcasting in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming PC
- Best Budget Gaming Headset Under $60: Turtle Beach Recon 50 vs BERIBES vs TAGRY
- RTX 3090 24GB vs RTX 4060 Ti 8GB in 2026: Used VRAM or New Efficiency?
- Best Gaming Headset in 2026 for Gaming and Music
- 50+ Raspberry Pi Project Ideas for 2025 (By Skill Level)
- Ryzen 5 5600G vs Ryzen 7 5700X: Which for a Budget 1080p Build?
- Qwen 3.6 35B-A3B-MTP on a GTX 1060 6GB: How Far Can Old GPUs Still Go?
- Build a RetroPie Handheld with the Raspberry Pi Zero W in 2026: Full BOM + Setup
- Intel Arc AI Inference: 2025 Performance & Setup Guide
- Kimi K3 Open Weights: What It Takes to Run It Locally
- Intel Arc Pro B70 vs RTX 3060 12GB for Local LLMs
- Logitech G29 vs HORI Racing Wheel Overdrive for Entry Sim Racing
- Cyberdeck Raspberry Pi 4/5 Mini Music Workstation Build Guide
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Which 27-Inch Wins?
- Intel Arc B580 for Local LLMs in 2026: 12GB for Under $300
- Best USB Microphone for Streaming in 2026
- Build a Raspberry Pi Zero W Retro Emulation Handheld in 2026
- CompactFlash vs SATA SSD vs IDE-to-USB: Best Storage for a Retro PC
- Gemma 4 26B-A4B NVFP4 vs Qwen 3.6 27B Q4_K_M: Single-GPU Local Inference Benchmarked
- Best CPU for Streaming and Gaming on a Single PC in 2026
- Best Webcam for PC Game Streaming Under $100 (2026)
- Do You Even Need a Graphics Card? Ryzen 5 5600G iGPU vs RTX 3060 for 1080p
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090