Skip to main content
Argon ONE M.2 SATA Expansion Board for Raspberry Pi 4 - ONE V2 Only
Argon Forty

Argon ONE M.2 SATA Expansion Board for Raspberry Pi 4 - ONE V2 Only

Bottom line: The Argon Forty Argon ONE M.2 SATA Expansion Board for Raspberry Pi 4 ($25.00 on Amazon as of 2026-11-20 23:13 UTC): Fits M.2 SATA SSDs in 2230, 2242, 2260 and 2280 lengths; main trade-off: fits only the Argon ONE V2 case, which is sold separately.

$25.00 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure β†’

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • βœ“ Fits M.2 SATA SSDs in 2230, 2242, 2260 and 2280 lengths
  • βœ“ UASP over USB 3.0 for faster reads and writes than a microSD card
  • βœ“ Replaces the Argon ONE V2 bottom panel, so the SSD stays inside the case
  • βœ“ Kit includes USB 3.0 bridge, bottom plate, screws, rubber feet and guide

Cons

  • βœ— Fits only the Argon ONE V2 case, which is sold separately
  • βœ— SATA only: M-key-only NVMe drives are not supported
  • βœ— Speed is capped by the Pi 4's USB 3.0 link, not native SATA bandwidth
  • βœ— Listed for Raspberry Pi 4 only; no Pi 5 support stated

Manufacturer description

πŸš€ Upgrade Your Raspberry Pi 4 with M.2 SATA SSD Storage Add high-capacity and faster storage to your Raspberry Pi 4 by installing an M.2 SATA SSD directly into your Argon ONE setup. Enjoy quicker boot times and improved system responsiveness compared to traditional microSD cards. ⚑ High-Speed UASP Transfer via USB 3.0 Built with UASP support, the expansion board maximizes data transfer speeds through the Raspberry Pi 4’s USB 3.0 interface, allowing faster read/write performance for operating systems, applications, and file storage. πŸ’Ύ Supports M.2 SATA SSDs (B-Key & B+M Key) Compatible with…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Argon Forty Argon ONE M.2 SATA Expansion Board for Raspberry Pi 4, so this read rests on the manufacturer's listed specs and the current price in the single board computers category (how we evaluate). Compare with similarly-priced alternatives in the single board computers category before committing. On the listing's own facts, the case for it is "Fits M.2 SATA SSDs in 2230, 2242, 2260 and 2280 lengths"; the main trade-off is "Fits only the Argon ONE V2 case, which is sold separately". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does the Argon ONE M.2 SATA Expansion Board work with NVMe SSDs?

No. It supports M.2 SATA SSDs with B-Key or B+M Key connectors. M-key-only NVMe drives are not listed as compatible.

Which SSD sizes fit in the Argon ONE M.2 board?

M.2 SATA SSDs in 2230, 2242, 2260 and 2280 form factors are supported, as long as they use a B-Key or B+M Key connector.

Will this board fit my original Argon ONE case or a different Pi case?

It is designed for the Argon ONE V2 case and replaces that case's bottom panel. The listing does not claim compatibility with other cases, and the Argon ONE V2 case is sold separately.

How does the SSD connect to the Raspberry Pi 4?

Through the included USB 3.0 bridge adapter, which plugs into one of the Pi 4's USB 3.0 ports. UASP support helps get the most transfer speed out of that USB 3.0 connection.

What comes in the box, and is an SSD included?

The kit includes the M.2 SATA expansion board, a USB 3.0 bridge adapter, a bottom cover plate, screws, rubber feet and an installation guide. The SSD is not included, and neither is the Argon ONE V2 case. Check the product listing for current warranty terms.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • πŸš€ Upgrade Your Raspberry Pi 4 with M.2 SATA SSD Storage Add high-capacity and faster storage to your Raspberry Pi 4 by installing an M.2 SATA SSD directly into your Argon ONE setup. Enjoy quicker boot times and improved system responsiveness compared to traditional microSD cards.
  • ⚑ High-Speed UASP Transfer via USB 3.0 Built with UASP support, the expansion board maximizes data transfer speeds through the Raspberry Pi 4’s USB 3.0 interface, allowing faster read/write performance for operating systems, applications, and file storage.
  • πŸ’Ύ Supports M.2 SATA SSDs (B-Key & B+M Key) Compatible with M.2 SATA SSDs of all sizes including 2230, 2242, 2260, and 2280 formats using B-Key or B+M Key connectors, providing flexible storage options for your Raspberry Pi projects.
  • πŸ”§ Designed for Argon ONE V2 Cases This expansion board replaces the bottom panel of the Argon ONE V2 case, seamlessly integrating an M.2 SATA SSD into your Raspberry Pi enclosure for a clean, all-in-one setup. (Argon ONE case required and sold separately.)
  • πŸ“¦ Complete Upgrade Kit Includes everything needed for installation: M.2 SATA expansion board USB 3.0 bridge adapter Bottom cover plate Screws and rubber feet Installation guide

Full Specifications

BrandArgon Forty
ColorM.2 BOARD
ModelA20-007-AR-MDT-EB
UnitCount1
ManufacturerArgon Forty
ItemPartNumberA20-007-AR-MDT-EB

Ready to buy?

Argon ONE M.2 SATA Expansion Board for Raspberry Pi 4 - ONE V2 Only is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers β€” check the listing for current terms. SpecPicks earns a small commission on qualifying purchases β€” thank you for supporting independent review work.

Buy on Amazon β€” $25.00

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Read our analysis

SpecPicks coverage that features this Single Board Computer.

Related Single Board Computers

Argon ONE M.2 SATA Expansion Board for Raspberry… head-to-head

Side-by-side specs, prices, and a pick for each matchup β€” no tab-switching.

More guides & deep dives from the SpecPicks archive

Browse all articles & guides β†’

More reviews from the SpecPicks archive

Browse all reviews β†’

Earliest SpecPicks reviews

Browse full archive β†’