WINSINN
WINSINN 40mm Fan 12V
Bottom line: The WINSINN 40mm Fan 12V is a specs-and-price decision rather than a crowd-consensus one in the retro cpu coolers & fans category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by WINSINN's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
✔️WINSINN 40mm fan 5V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.✔️Rated Voltage: DC 12V, Current: 0.11A, Power: 1.32W, Speed: 7900PRM, Air Pressure: 8.07mmH₂O, Airflow: 8.5CFM, Noise: 28.2dBA✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling…
SpecPicks Verdict
SpecPicks scored WINSINN 40mm Fan 12V using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. WINSINN's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- ✔️WINSINN 40mm fan 12V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.
- ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ✔️Rated Voltage: DC 12V, Current: 0.11A, Power: 1.32W, Speed: 7900PRM, Air Pressure: 8.07mmH₂O, Airflow: 8.5CFM, Noise: 28.2dBA
- ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation.
- ✔️Packing List: 2 x 40mm Fan - 12v - Dual Ball Bearings, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 20mm
Full Specifications
| Brand | WINSINN |
|---|---|
| Model | DB402012F2P |
| Voltage | 12 volts, 5 volts |
| Wattage | 1.32 watts |
| Material | Plastic |
| Unit Count | 2 Count |
| Noise Level | 28.2 db |
| Part Number | DB402012F2P |
| Compatibility | PC |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 2 |
| Air Flow Capacity | 8.5 cfm |
| ✔️Widely Used | Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation. |
| Compatible Devices | Desktop |
| ✔️Packing List | 2 x 40mm Fan - 12v - Dual Ball Bearings, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 20mm |
| ✔️Rated Voltage | DC 12V, Current: 0.11A, Power: 1.32W, Speed: 7900PRM, Air Pressure: 8.07mmH₂O, Airflow: 8.5CFM, Noise: 28.2dBA |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 7900 rpm |
| Item Dimensions L x W x H | 1.57"L x 0.79"W x 1.57"H |
| Full listing title | WINSINN 40mm Fan 12V, 3D Printer Micro 12 Volt Fans 4020 Dual Ball Bearing, Brushless Cooling 40mmx20mm 2PIN (Pack of 2Pcs) |
Ready to buy?
WINSINN 40mm Fan 12V, 3D Printer Micro 12 Volt Fans 4020 Dual Ball Bearing, Brushless Cooling 40mmx20mm 2PIN (Pack of 2Pcs) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- RTX A6000 48GB vs RTX 3090 24GB for Production LLM Inference (2026)
- 1440p 165Hz vs 4K 60Hz: ASUS TUF VG27 vs SANSUI 27" for Gaming
- Jellyfin NVENC Transcodes + a Local LLM on One RTX 3060 12GB
- Run a Local LLM on a Raspberry Pi 4 8GB: What Works in 2026
- How to Find and Join Active UT99 and UT2004 Servers in 2026
- Raspberry Pi 4 8GB vs Ryzen 5 5600X: Gemma 3 1B Always-On
- NVIDIA Nemotron 3 Ultra (550B/55B-Active): What a 12GB Rig Can Run
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget 1080p Gaming Build
- Best Parts for a ComfyUI + Local LLM Workstation in 2026
- Ryzen AI Max+ 395 (Strix Halo) Mini PC vs RTX 3060 12GB for Local LLMs
- Ryzen AI Max vs RTX 4060: Which Fits Your Build?
- Best GPU for Stable Diffusion and Local Image Generation in 2026
- Voodoo3 3500 TV on Windows 98 SE: AI-Assisted Driver Install Walkthrough in 2026
- ASUS TUF VG27AQ vs Dell G3223Q: 1440p HDR or 4K 32-Inch in 2026
- KOORUI 27-inch 4K QD-Mini LED: A Budget HDR Gaming Monitor?
- HiDream-O1 1.5 Lands #3 in Text-to-Image: Can You Run It Locally on a 12GB GPU?
- Intel Panther Lake on Linux: First Core Ultra X7 Numbers Land
- Best USB Microphone for Streaming in 2026
- Best Game Controllers for PC and Console (2026)
- Sound BlasterX G6 for Retro DOS and Win98 Gaming: Does a Modern USB DAC Fix the EAX Era?
- ROG Ally X vs Steam Deck OLED: 2026 Buying Guide
- How to Build a Fully Declarative Homelab Stack
- Beijing's $295B AI Buildout Wants 80% Domestic Chips — What It Means for GPU Buyers
- 768GB Intel Optane DIMMs Running a 1-Trillion-Parameter LLM: How the Build Actually Works
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090