Skip to main content
12 Pieces Solder Wick 1.5 Meter Length Braided Wicks Desoldering No-clean Solder Braid Wick Set(0.08", 0.1", 0.12",)
Hotop

12 Pieces Solder Wick 1.5 Meter Length Braided Wicks Desoldering No-clean Solder Braid Wick Set(0.08", 0.1", 0.12",)

Bottom line: The 12 Pieces Solder Wick 1.5 Meter Length Braided Wicks Desoldering: 12 wicks total, 4 each in 2.0mm, 2.5mm and 3.0mm widths; main trade-off: no-clean flux load can be light, sometimes needing a second pass.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Also on eBay → Compare to similar tools & maintenance

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For PC and retro-hardware cleaning and maintenance tools, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 12 wicks total, 4 each in 2.0mm, 2.5mm and 3.0mm widths
  • ✓ 1.5 m (5 ft) per braid, so 18 m of wick across the set
  • ✓ Non-conductive, non-corrosive residue means no post-desolder cleanup
  • ✓ Fine-braided copper weave pulls solder fast via capillary action
  • ✓ Three widths cover fine SMD pads through larger through-hole joints

Cons

  • ✗ No-clean flux load can be light, sometimes needing a second pass
  • ✗ Copper braid tarnishes in storage; no sealed dispenser included
  • ✗ Narrow 2.0mm width still overshoots very fine 0402-class pads
  • ✗ Widths listed in mm while the title uses inches, so sizing is confusing

Manufacturer description

Features:Little residues:The solder braided wicks can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency. Besides, they will just leave little residues after use and the residues are non-conductive and non-corrosive.Practical tool:The desoldering wicks are practical tool to correct mistakes on small PCB boards and will not make the damage, suitable for re-soldering and desoldering.Specifications:Material: copper wiresSize:Width: 2.0 mm, 2.5 mm, 3.0 mmLength: 1.5 m/ 5 feetPackage Contents:4 x Solder wicks, width 2.0 mm4 x Solder wicks, width…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored 12 Pieces Solder Wick 1.5 Meter Length Braided Wicks Desoldering… using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. Hotop's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • Low residue design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time to clean it
  • Quality material: the desoldering wicks are made of quality copper wires, and the design of precise weaving can improve the capillary effect and the redundant solder absorbing ability, increasing the work efficiency
  • Extensive applications: the braided solder wicks are suitable for labs, home and industry welding work; And the wicks adopt fine braid design to promote strong capillary action, bringing more convenience for your daily work
  • Various sizes: you will receive 12 pieces of solder braid wicks in 3 sizes, width respectively is 2.0 mm, 2.5 mm, 3.0 mm, and the length is 1.5 m; 4 pieces for each size, enough quantity and length for your daily needs
  • Easy to use: the desoldering wicks can provide a nice way to correct mistakes on small PCB boards and will not make the damage, suitable for re-soldering and desoldering

Full Specifications

Size‎0.08", 0.1", 0.12"
BrandHotop
Material‎copper
Part Number‎Hotop-Solder Wick-SW20
Item Package Quantity‎12

Ready to buy?

12 Pieces Solder Wick 1.5 Meter Length Braided Wicks Desoldering No-clean Solder Braid Wick Set(0.08", 0.1", 0.12",) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Tools & Maintenance

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
12 Pieces Solder Wick 1.5 Meter Length Braided Wicks Desoldering No-clean Solder Braid Wick Set(0.08", 0.1", 0.12",)
View on Amazon →