S erounder PCIE to Parallel Expansion Card
Bottom line: The S erounder PCIE to Parallel Expansion Card is a specs-and-price decision rather than a crowd-consensus one in the expansion cards category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ A PCI Express single parallel port card.
- ✓ Backed by S erounder's warranty and support channels
Cons
- ✗ Needs a free PCIe slot — check which of your board's slots are wired for it
Manufacturer description
A PCI Express single parallel port card that can be connected to parallel devices such as printers, programmers, scanners, etc. Supports a variety of mainstream operating systems, including for for OS X and for Linux. The product uses a PCI Express x1 slot that can be installed in a variety of PCI Express slots (including 4x 8x16x).Specifications:Compliant with PCI-Express Specification Revision 1.1Built-in SPP, , EPP, ECP compatible IEEE 1284 printing protocolNo switch without jumper, easy to set up with software32-bit bus design, supporting PCI 2.1 specificationUse high speed I/O…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for S erounder PCIE to Parallel Expansion Card, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- A PCI Express single parallel port card.
- Can be connected to parallel devices such as printers, programmers, scanners, etc.
- Supports a variety of mainstream operating systems.
- For for OS X and for Linux.
- The product uses a PCI Express x1 slot that can be installed in a variety of PCI Express slots (including 4x 8x16x).
Full Specifications
| Brand | S erounder |
|---|---|
| Style | Classic |
| Style Name | Classic |
| Model Number | PCIE to Parallel Expansion |
| Compatibility | Linux |
| Mfr Part Number | S erounderhxqd6cgs5y874 |
| Number of Items | 1 |
| Compatible Devices | Printer, Programmer, Scanner |
| Hardware Interface | PCI |
| Full listing title | PCIE to Parallel Expansion Card, PCI Express to DB25 LPT Parallel Port Adapter with Low Bracket for for OS X and for Linux, SPP/EPP/ECP |
Ready to buy?
PCIE to Parallel Expansion Card, PCI Express to DB25 LPT Parallel Port Adapter with Low Bracket for for OS X and for Linux, SPP/EPP/ECP is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Sim-Racing Wheel and Shifter Setup for Beginners in 2026
- Best Streaming Setup for PC Gamers in 2026: 5 Picks Under $500
- LEGO Batman: Legacy of the Dark Knight Steam Deck FPS
- Microsoft Now Points to 32GB RAM for Windows 11 Gaming — What It Means for Your Build
- RTX 3060 12GB vs RTX 4070 Super for Local LLMs (2026): Same VRAM, 40% More Bandwidth
- RTX 3090 vs RTX 4090 for LLM Inference: Same 24GB (2026)
- Best Budget Streaming Mic + Capture Setup: Blue Yeti vs HyperX QuadCast 2 S
- RetroPie Handheld Shells in 2026: Pick the Right Pi for Your DIY Handheld
- Best 1440p 240Hz Gaming Monitors for Competitive FPS in 2026
- Lenovo G02 Retro Handheld Reportedly Ships Preloaded With Pirated Games
- Step 3.7 Flash vs Gemma 4 12B: Which Local Model Wins on a 12GB GPU?
- MAYFLASH F300 vs DualSense for PC Rhythm Games (2026)
- Black Friday SSD Deals: 5 NVMe and SATA Drives Worth Buying
- Local LLMs on Refurb M4 Max vs New M5 Max: What the LocalLLaMA Numbers Show
- Best Controller for PC Emulation: 8BitDo Pro 2 vs GameSir G7
- Corsair's New Gaming Mouse Has a Dedicated Stream Deck Launch Button
- Cerebras Says It's Running GPT-5.5 Internally — What It Means for Local LLM Boxes
- Raspberry Pi OS Moves to Linux 6.18 LTS: What Changes for Pi Builders
- Ryzen AI Max for Local LLMs: What the Hardware Enables
- Using Claude to Auto-Generate Period-Correct DOSBox-X Configs for 90s PC Games
- Best AIO Liquid Cooler for Ryzen X3D & High-End Intel (2026)
- Half an MI350X in a PCIe Slot: Inside AMD’s 144GB MI350P, the First Air-Cooled CDNA 4 Card
- Anthropic's Fable 5 Ban and Jailbreak: What It Means for Local-LLM Resilience
- Crucial BX500 vs Samsung 870 EVO for an Emulation Box
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090