Easycargo 2pcs 40mm Heatsink Kit 100mmx40mmx20mm + 3M8810 Thermal Conductive Adhesive Tape
Bottom line: The Easycargo 2pcs 40mm Heatsink Kit 100mmx40mmx20mm + 3M8810 Thermal: Pre-applied 3M 8810 thermal tape means no clamps or screws needed; main trade-off: passive only, so hot retro chipsets may still need airflow over the fins.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Pre-applied 3M 8810 thermal tape means no clamps or screws needed
- ✓ Black anodized aluminum finish resists corrosion and hides inside dark cases
- ✓ Long 100mm footprint spans stepper motors, Peltier modules, and drive bays
Cons
- ✗ Passive only, so hot retro chipsets may still need airflow over the fins
- ✗ 75g per piece can stress adhesive on vertical or overhead mounts
- ✗ 3M 8810 tape bonds permanently and is hard to reposition after contact
- ✗ 20mm fin height blocks tight clearances in slim retro cases
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Easycargo 2pcs 40mm Heatsink Kit 100mmx40mmx20mm + 3M8810 Thermal…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "Pre-applied 3M 8810 thermal tape means no clamps or screws needed"; the main trade-off is "Passive only, so hot retro chipsets may still need airflow over the fins". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Includes 2 pieces black anodized aluminum heatsink.
- Pre-applied thermal conductive adhesive tape backing.
- Can be applied for passive cooling of Water cooling modules, 3D printers stepper motor, NEMA 17, TEC1-12706, TEC1-12710 Thermoelectric Peltier Cooler etc.
- Dimension: 3.9 x 1.57 x 0.78 inch / 100mm x 40mm x 20mm (L*W*H).
- Unit Weight: 2.7 oz / 75 gram per piece.
Full Specifications
| Brand | Easycargo |
|---|---|
| Model | 1004020B02-3M-8810 |
| Weight | 2.7 oz |
| Dimension | 3.9 x 1.57 x 0.78 inch / 100mm x 40mm x 20mm (L*W*H). |
| Dimensions | 3.9 x 1.57 x 0.78 inch |
| Unit Count | 2 Count |
| Part Number | 1004020B02-3M-8810 |
| Unit Weight | 2.7 oz / 75 gram per piece. |
| Mounting Type | Panel Mount |
| Number of Items | 2 |
| Cooler Heatsink Material | Aluminum |
| Item Dimensions L x W x H | 3.9"L x 1.57"W x 0.78"H |
| Full listing title | Easycargo 2pcs 40mm Heatsink Kit 100mmx40mmx20mm + 3M8810 Thermal Conductive Adhesive Tape, Cooling Aluminium Heat Sink |
Benchmark data for other processors
Ready to buy?
Easycargo 2pcs 40mm Heatsink Kit 100mmx40mmx20mm + 3M8810 Thermal Conductive Adhesive Tape, Cooling Aluminium Heat Sink is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Hands-On: Asus ROG Harpe II Extreme Edition 20 Gaming Mouse
- Best GPU for Local Llama 3 8B Under $400: Why the RTX 3060 12GB Wins
- Gemma 4 31B on a 12GB RTX 3060: Quantization, VRAM, and Real tok/s
- Muse Spark 1.1 Beats GLM-5.2 at Coding — Does It Change the Local-Rig Question?
- Rescue a Dying Vintage IDE Drive: Imaging Retro Disks with a USB-to-IDE Adapter
- Claude Limits Cut: Why a Local Fallback Rig Just Got Cheaper
- pxpipe Hides Prompts in PNGs to Cut Claude Code Tokens 70% — Or Just Run Local on an RTX 3060
- Backing Up Vintage IDE Drives to CompactFlash in 2026
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 3090
- Modern Sound Cards on Retro Rigs: The Sound BlasterX G6 for Win9x and DOS Audio
- Why Nvidia Killed 3dfx — and How Voodoo Still Shapes Every GPU Launch
- Raspberry Pi LLM GPU Guide: What Actually Works in 2026
- Best Gaming Monitor for PS5 & High-Refresh PC Gaming (2026)
- Best CPU Cooler for the Ryzen 7 5700X: Noctua vs DeepCool vs CoolerMaster
- Best Streaming & Content-Creation Starter Kit in 2026
- Four Frontier Models in Eight Days: What a 12GB RTX 3060 Can Actually Run
- Best Wireless Controller for PC Gaming in 2026
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a 2026 Build
- Best AIO Liquid Cooler for Ryzen X3D & High-End Intel (2026)
- AMD Ryzen 7 7700X3D Lands as a Newegg Exclusive at $329
- Raspberry Pi Locator Shuts Down in July: Where to Buy a Pi Now
- Best Budget FPS Gaming Setup Under $120: Mouse, Pad, Keyboard and Headset for 2026
- Best Budget Local-AI Workstation Parts in 2026: 5 Picks
- Intel Arc Pro B60 24GB: AI Workstation GPU Guide 2025
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090