ZealSound
ZealSound Microphone Stand Gooseneck 19”
Bottom line: The ZealSound Microphone Stand Gooseneck 19” ($16.79 on Amazon as of 2026-10-07): 19-inch carbon steel gooseneck bends 360 degrees with no knobs to loosen; main trade-off: manufacturer says it is not intended for Blue Yeti or Yeti Nano mics.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 19-inch carbon steel gooseneck bends 360 degrees with no knobs to loosen
- ✓ Aluminum alloy clamp fits desk edges up to 2.24" thick, with a non-slip pad
- ✓ Built-in headset hook on the clamp keeps headphones and cables off the desk
- ✓ Holds mics up to 2.2 lb, with room for a foam windscreen or mic flag
- ✓ Includes 3/8" to 5/8" adapter plus a clip for handheld mics up to 1.38" wide
Cons
- ✗ Manufacturer says it is not intended for Blue Yeti or Yeti Nano mics
- ✗ Won't mount on desks or tables thicker than 2.24"
- ✗ 2.2 lb weight cap rules out heavier mic and mount combinations
- ✗ Screws for the 1/4" wall-mount holes are not included
Manufacturer description
The ZealSound gooseneck microphone stand clamps to the edge of your desk, podium or lectern, so your mic sits where you need it without a tripod taking up space. Its 19-inch carbon steel gooseneck bends through a full 360 degrees with no knobs to loosen. You can bring the mic close to your mouth and still reach your keyboard, monitors, mixer and notes. The aluminum alloy desk clamp fits surfaces up to 2.24 inches thick. A non-slip pad improves grip and helps protect the finish of your desk. A built-in headset hook on the clamp gives your headphones a place to hang between sessions. The arm…
SpecPicks Verdict
SpecPicks scored ZealSound Microphone Stand Gooseneck 19” using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. ZealSound's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this gooseneck stand fit my desk?
The aluminum alloy clamp fits table edges up to 2.24 inches thick. It works on office desks, conference tables, podiums and lecterns, and a non-slip pad helps stop it from sliding or scratching the surface.
Does it work with a Blue Yeti or Blue Snowball?
The included 3/8" to 5/8" adapter fits threaded mics like the Blue Snowball Ice and HyperX SoloCast. ZealSound says the Blue Yeti and Blue Yeti Nano use their own stand design and are not intended for this stand.
How heavy a microphone can the arm hold?
It supports microphones up to 2.2 lb. That leaves room for common add-ons like foam windscreens, mic flags or clip-on mounts without the gooseneck sagging in normal use.
What comes in the box?
You get one 19-inch gooseneck arm with an aluminum alloy desk clamp, one 3/8" to 5/8" screw adapter, and one mic clip holder for handheld mics up to 1.38" in diameter.
Can I mount it on a wall instead of a desk?
Yes. The clamp base has two 1/4" mounting holes for wall installation with standard 1/4" screws. The screws are not included, so buy them separately.
Key Features
- Stable Desk Clamp with Built-In Headset Hook for Organized Setup – The upgraded aluminum alloy desk clamp secures the microphone gooseneck stand firmly to desks, tables, podiums, and workstations, helping keep your microphone stable during recording, streaming, meetings, or online classes. Unlike basic mic stands, the clamp features an integrated headset hook that lets you conveniently hang headphones when not in use, keeping cables off the desk and your workspace tidy. Ideal for podcasters, streamers, gamers, teachers, and remote professionals who need a reliable desktop microphone setup while maintaining a clean, organized recording or working environment.
- Extended 19-Inch Reach for Greater Mic Positioning Range – This mic stand features a longer 19-inch gooseneck arm that gives you more reach for flexible microphone placement across wider desks and larger setups. The extended length makes it easier to bring the mic closer while keeping monitors, keyboards, mixers, and notes within easy reach. The adjustable gooseneck helps maintain a comfortable speaking angle for clear voice pickup during recording, streaming, or presentations. Podcasters, streamers, teachers, presenters, musicians, and event hosts can use this desktop mic stand on desks, podcast tables, podiums, and lecterns for livestreams, online classes, speeches, and meetings.
- Flexible Gooseneck Positioning for Precise Mic Placement – The adjustable gooseneck arm bends smoothly and supports full 360° positioning, allowing the microphone to be placed exactly where you need it for voice capture. The flexible design makes it easy to raise, lower, or angle the mic without knobs or complex adjustments, helping maintain a comfortable speaking distance while keeping your desk setup compact. This flexible positioning works well for podcast recording, livestream commentary, gaming voice chat, online teaching, video meetings, and speech setups, giving creators, presenters, and remote professionals better control over microphone placement in changing recording environments.
- Steel Gooseneck and Aluminum Alloy Clamp for Everyday Durability – Built with a carbon steel gooseneck and an aluminum alloy desk clamp, this microphone stand is designed for repeated daily use in recording, work, and speaking setups. The arm features a baked-paint finish that helps resist peeling, scratches, and wear from frequent bending and repositioning, keeping a clean look over time. The metal clamp grips your desk firmly to help reduce wobble while you speak, record, or stream. A practical choice for podcasters, teachers, streamers, office users, and creators who need a desktop mic stand that stays reliable through regular adjustments, long workdays, and repeated setup changes.
- Quick Clamp Setup for Easy Installation & Portable Use – This mic stand uses a clamp-on design that installs in seconds—attach the desk clamp to a table edge, tighten, then adjust the flexible gooseneck for comfortable mic placement. The bendable arm rolls up for compact storage, making it easy to pack in a bag and move between desks, home studios, classrooms, or event setups. The clamp base also includes two 1/4" mounting holes for optional wall installation with standard 1/4" screws (not included). Podcasters, streamers, gamers, teachers, students, and remote professionals can quickly create a reliable recording setup at home, in classrooms, offices, or temporary streaming spaces.
- Wide Mic Compatibility with 3/8" to 5/8" Adapter – This mic stand supports many common mic setups. The included 3/8" to 5/8" screw adapter fits popular mics like Blue Snowball Ice, HyperX SoloCast, and other microphones with standard threads. The mic clip holder fits handheld mics up to 1.38" in diameter, making it great for dynamic mics used for speaking, streaming, and presentations. Podcasters, streamers, gamers, teachers, and presenters can easily mount their microphones for livestreams, voice chat, online classes, meetings, and small event announcements. Note: Blue Yeti and Blue Yeti Nano microphones use their own stand design and are not intended for this type of mic stand.
Full Specifications
| Brand | ZealSound |
|---|---|
| Color | Black |
| Style | Flexible Gooseneck Mic Arm |
| Weight | 2.2 lb |
| Material | Aluminum, Metal |
| Base Type | Metal Table Clamp |
| Model Name | h19 |
| Unit Count | 1.0 Count |
| Finish Type | Painted or baked-on finish |
| Model Number | H19 Series |
| Material Type | Aluminum, Metal |
| Product Style | Flexible Gooseneck Mic Arm |
| Item Type Name | Microphone Arm Stand H19 |
| Maximum Height | 19 Inches |
| Item Dimensions | 19 x 0.48 x 19 inches |
| Body Material Type | Aluminum |
| Included Components | 19-inch gooseneck arm stand, aluminum alloy desk clamp, 3/8" to 5/8" screw adapter, microphone holder |
| Warranty Description | Manufacturer warranty for 365 days from date of purchase. |
| Manufacturer Part Number | H19 series |
| Item dimensions L x W x H | 19 x 0.48 x 19 inches |
| Full listing title | ZealSound Microphone Stand Gooseneck 19”, Flexible Clamp-On Desktop Mic Stand with 360° Adjustable Arm, 3/8" to 5/8" Adapter, Heavy-Duty Desk Mount, for Podcasting, Streaming, Podium & Public Speaking |
Ready to buy?
ZealSound Microphone Stand Gooseneck 19”, Flexible Clamp-On Desktop Mic Stand with 360° Adjustable Arm, 3/8" to 5/8" Adapter, Heavy-Duty Desk Mount, for Podcasting, Streaming, Podium & Public Speaking is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- How to Build a Fully Declarative Homelab Stack
- One Desk, Two Sims: Swapping a G29 Wheel and an Extreme 3D Pro Stick
- WoW Mythic+ 3500 on Steam Deck: Is It Possible?
- Best Hardware for Running Small Language Models Locally in 2026
- Can a Raspberry Pi 4 8GB Run Local LLMs in 2026? Ollama tok/s + SSD-Boot Setup
- Best Wheel and Controller for Truck and Farm Sims in 2026
- Best Internal SATA SSDs for PC Upgrades (2026)
- RX 9070 XT vs RTX 3060 12GB for Local LLMs in 2026
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput and VRAM Limits in 2026
- Build a Frigate AI Security-Camera NVR on a Raspberry Pi 4 8GB in 2026
- GLM-5.2's Long-Horizon Agent Mode: Running It Locally in 2026
- Benchmarking Open Models for Tool-Use on a Budget RTX 3060 Rig
- Raspberry Pi 5 IOMMU Driver Lands for the Mainline Linux Kernel
- Best PlayStation Controller for PC Gaming in 2026
- SATA SSD vs NVMe for Gaming: Does It Actually Load Faster?
- AMD Ryzen AI Mini PC vs a DIY RTX 3060 Build for Local LLMs
- Best Streaming Gear for New Creators in 2026
- Run Kimi K2.7 Code Locally: Ollama vs llama.cpp on RTX 3060
- Prime Big Deal Days 2026 GPU Deals for Local LLMs: 12GB vs 16GB Cards
- Best Esports Club Practice Room Gear in 2026
- Nous Hermes Desktop: A Local AI Agent for Your Own Hardware
- RTX 4090 AI TOPS in 2026: What the Number Means
- Self-Host Jellyfin on the Raspberry Pi 4 8GB: Transcoding Limits
- Google's Tiny Gemma 3 Board: What a $0 SBC Gemma Demo Means for Local AI
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090