Skip to main content
Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV
Inkbird

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV

Bottom line: The Inkbird PID Temperature Controller Kit ($34.39 on Amazon as of 2026-11-20 11:20 UTC): 40DA solid state relay included, so no separate SSR purchase; main trade-off: requires mains-voltage wiring, so not a plug-and-play unit.

$34.39 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For PC and console controllers, synthesises manufacturer specs and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ 40DA solid state relay included, so no separate SSR purchase
  • ✓ Accepts 100-240V AC input for use on most mains supplies
  • ✓ Dual display shows live temperature and setpoint together
  • ✓ Takes 2-wire or 3-wire sensors, including K-type thermocouples
  • ✓ Alarm relay rated AC250V 3A, NO or NC, can drive a buzzer

Cons

  • ✗ Requires mains-voltage wiring, so not a plug-and-play unit
  • ✗ Only one SSR control output, so one heating zone per controller
  • ✗ Alarm relay 3A rating is for resistive loads only
  • ✗ Probe not listed in kit contents, so confirm before ordering

Manufacturer description

The Inkbird PID Temperature Controller Kit gives you precise, closed-loop temperature control for DIY projects that need a steady setpoint, such as heaters, kilns, smokers, or brewing rigs. It runs on 100 to 240V AC mains power, so the same kit works in most regions without a separate supply. The kit includes a 40DA solid state relay. The controller drives it through a dedicated SSR output, which lets you switch your heating load without the wear of a mechanical contactor. The controller needs an SSR or relay to work, and this one comes in the box. A separate alarm relay is rated AC250V, 3A…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Inkbird PID Temperature Controller Kit, so this read rests on the manufacturer's listed specs and the current price in the controllers & gamepads category (how we evaluate). Compare with similarly-priced alternatives in the controllers & gamepads category before committing. On the listing's own facts, the case for it is "40DA solid state relay included, so no separate SSR purchase"; the main trade-off is "Requires mains-voltage wiring, so not a plug-and-play unit". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Does the Inkbird PID controller kit come with a solid state relay?

Yes. A 40DA SSR is included. The controller needs an SSR or relay to switch your load, and it drives one through its dedicated SSR output.

What temperature sensors work with this controller?

It supports both 2-wire and 3-wire sensors, including K-type thermocouples. Check the product listing to confirm whether a probe is included in your kit.

Can I use it on 220V or 240V power?

Yes. The controller accepts 100 to 240V AC input, which covers both 120V North American and 220-240V supplies.

What can I connect to the alarm output?

The alarm relay is rated AC250V, 3A for resistive loads and can be set to NO or NC. You can wire a buzzer or another low-current indicator to it.

Can the display show Fahrenheit instead of Celsius?

Yes. You can set the readout to Celsius or Fahrenheit. Both the real-time temperature and the setpoint show at the same time in two display windows.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Alarm Output: With 1 alarm relay output, AC250 V, 3 A (Resistive load), ON or NC, you can wire a buzzer
  • Supports 3-Wire Sensor: a 3-wire sensor or 2-wire sensor, like the K type thermocouple and Cu500, is supported by this PID temperature controller
  • SSR Output: With 1 relay output for external SSR, an SSR or relay is a must for this temperature controller; A 40DA SSR is included
  • Digital Display Celsius or Fahrenheit: It’s a digital PID controller but also supports Centigrade or Fahrenheit reading
  • 2 Temp Displaying Windows: The real-time temperature and the setpoint are shown at the same time

Full Specifications

BrandInkbird
Colorwhite
Voltage240 volts
MaterialPlastic
SSR OutputWith 1 relay output for external SSR, an SSR or relay is a must for this temperature controller; A 40DA SSR is included
Part NumberPID40W
Alarm OutputWith 1 alarm relay output, AC250 V, 3 A (Resistive load), ON or NC, you can wire a buzzer
Display TypeLED
Material TypePlastic
Number of Items1
Included ComponentsPID, SSR 40DA Solid State Relay, K Type Thermocouple, and White Heat Sink
Supports 3-Wire Sensora 3-wire sensor or 2-wire sensor, like the K type thermocouple and Cu500, is supported by this PID temperature controller
2 Temp Displaying WindowsThe real-time temperature and the setpoint are shown at the same time
Item Dimensions L x W x H3.5"L x 1.88"W x 1.88"H
Digital Display Celsius or FahrenheitIt’s a digital PID controller but also supports Centigrade or Fahrenheit reading

Ready to buy?

Inkbird PID Temperature Controller Kit, High Voltage 100ACV to 240ACV is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $34.39

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Controllers & Gamepads

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →