Skip to main content
LINKUP - Ultra PCIe 4.0 X16 Riser Cable (Reconditioned) [RTX4090 RX6950XT x570 B550 Z690 Tested] Vertical Mount Gaming PCI Express Gen4┃Universal 90 Degree Socket (10cm / 3.9") 3.0 Gen3 Compatible
LINKUP

LINKUP - Ultra PCIe 4.0 X16 Riser Cable (Reconditioned) [RTX4090 RX6950XT x570 B550 Z690 Tested] Vertical Mount Gaming PCI Express Gen4┃Universal 90 Degree Socket (10cm / 3.9") 3.0 Gen3 Compatible

Status: LINKUP - Ultra PCIe 4.0 X16 Riser Cable: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

Bottom line: The LINKUP - Ultra PCIe 4.0 X16 Riser Cable (Reconditioned) [RTX4090: True PCIe 4.0 signaling rated over 64GB/s bi-directional across all 16 lanes; main trade-off: reconditioned unit, not factory-new, so cosmetic wear is possible.

Unavailable on Amazon as of

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ True PCIe 4.0 signaling rated over 64GB/s bi-directional across all 16 lanes
  • ✓ Per-lane individual shielding blocks EMI/RFI crosstalk between channels
  • ✓ Validated on RTX 4090, RX 6950XT and X570/B550/Z690 boards
  • ✓ Hand-soldered gold-plated contacts tuned to the 85-ohm PCIe impedance spec

Cons

  • ✗ Reconditioned unit, not factory-new, so cosmetic wear is possible
  • ✗ Only 10cm (3.9 inches) long, too short for many full-tower vertical mounts
  • ✗ LINKUP advises against using the mounting screws due to hole misalignment
  • ✗ Not compatible with screw-mounting in the Thermaltake P8 case

Manufacturer description

∙AGILE AT RANGE►【Extreme High Speed】Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. More headroom works foroverclocked CPUs and GPUs.LINKUP Riser Cables feature technology used Extreme High-Speed wires that are tested to reach speeds of 160GB/s for the sum of all x16 channels.LINKUP PCIE 4.0 compatible riser cables = Untouched in their class►【Improved Shielding】Individual PCIE laneway shielding blocks unwanted interference to improve signalstrength at longer distances.►【Pure Frequency】Designed to match PCIE impedance differential of 85 ohms—signals traveling betweenthe motherboard…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for LINKUP - Ultra PCIe 4.0 X16 Riser Cable (Reconditioned) [RTX4090…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "True PCIe 4.0 signaling rated over 64GB/s bi-directional across all 16 lanes"; the main trade-off is "Reconditioned unit, not factory-new, so cosmetic wear is possible". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, confirm the board side: this card needs a free PCIe 4.0 x16 slot. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX4090, RTX3090ti, RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6950XT, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets.
  • Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount. *Please do not use the screws to mount the TT P8 case (the GPU can still be secured by the two screws on the PCIE slots in the case)
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals at range. Re-engineered wires and connectors for PCIe 4.0 85ohm applications for GPUs, M.2 NVMe SSD. Quality hand soldered gold-plated contacts for signal integrity.
  • Unique individual laneway shielding prevents external EMI/RFI and interference between channels. Sectional design allows air ventilation and lowers working temperatures for better overall system performance. Backed by LINKUP Limited 1-Year Warranty and complimentary Premium Online Support. *** Compatible with most GPU/motherboard components and fits most cases.

Full Specifications

BrandLINKUP
ColorBlack
Cable TypeComponent
Unit Count1 Count
Item Length10 centimeters
Part NumberPCIE4EXT11SR-010-r
Connector TypeDisplayPort
Special FeatureHigh Speed
Compatible DevicesSSD
Data Transfer Rate160 gigabytes_per_second
Other Special Features of the ProductHigh Speed

Ready to buy?

Amazon shows no buyable offer for LINKUP - Ultra PCIe 4.0 X16 Riser Cable at the last check. An Amazon search for this model lists current offers. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Search Amazon for an in-stock match →

Related Accessories

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
LINKUP - Ultra PCIe 4.0 X16 Riser Cable (Reconditioned) [RTX4090 RX6950XT x570 B550 Z690 Tested] Vertical Mount Gaming PCI Express Gen4┃Universal 90 Degree Socket (10cm / 3.9") 3.0 Gen3 Compatible
Unavailable on Amazon. Current offers:
LINKUP - Ultra PCIe 4.0 X16 Riser Cable
Search in-stock →