innomaker
innomaker GS (Global Shutter) Camera Module
Bottom line: The innomaker GS Camera Module is a specs-and-price decision rather than a crowd-consensus one in the single board computers category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by innomaker's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored innomaker GS Camera Module using a rating × review-volume × price-fit model applied to published specs and reviews across the single board computers category. innomaker's single board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 📌 Compatible with all Raspberry Pi boards - Global shutter camera module for Raspberry Pi models Pi 5/4/3B+/3/Zero with plug-and-play drivers
- ⚡️ IMX296 Mono Global Shutter Sensor - 1.58MP (1456×1088) resolution | 60fps | 6.3mm Type 1/2.9 CMOS | variable charge-integration
- 🎥 High-speed Y10/YUV output - Stream Mode & Flash Strobe support | Mode0 continuous streaming | Mode1 fast trigger (<1μs latency)
- 🔌 Isolated hardware trigger - External capture on falling-edge signal | Strobe sync | Industrial-grade signal isolation
- 🚀 Dual driver flexibility - Supports Raspberry Pi OS libcamera tools & InnoMaker v4l2-ctl trigger control
- Global Shutter Camera Module with IMX296 Sensor, High Speed, Native Raspberry Pi OS Driver, Supports Rpi-Cam/Libcamera & External Trigger, for All RPi Models,On board eeprom
Full Specifications
| Brand | innomaker |
|---|---|
| Color | CAM-MIPI296RAW |
| Lens Type | Wide Angle |
| Focus Type | Fixed Focus |
| Model Name | CAM-MIPI296RAW |
| Style Name | CAM-MIPI296RAW |
| Unit Count | 1 Count |
| File Format | JPEG |
| Form Factor | Compact |
| Screen Size | 4.5 inches |
| Sensor Type | CMOS |
| Model Number | CAM-IMX296RAW |
| Built-In Media | M12 Lens-seat, CS Lens-Seat, M12 Wide Angle Lens |
| Camcorder Type | Video Camera |
| Shooting Modes | Stream, Strobe |
| Special Feature | Low Light |
| Antenna Location | high-speed photography, low light environments, applications requiring external triggering, Raspberry Pi projects |
| Maximum Aperture | 2.8 f_stop |
| Minimum Aperture | 2.8 millimeters |
| Video Resolution | 1456x1088 |
| Full listing title | GS (Global Shutter) Camera Module for Raspberry Pi All Series with IMX296 Mono Sensor (1456x1088) 60fps, External Trigger Support - Supports Rpi-Cam/Libcamera & External Trigger |
Ready to buy?
GS (Global Shutter) Camera Module for Raspberry Pi All Series with IMX296 Mono Sensor (1456x1088) 60fps, External Trigger Support - Supports Rpi-Cam/Libcamera & External Trigger is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Single Board Computers
![Arduino Nicla Vision [ABX00051] - Compact Vision AI Board with 5MP Camera, Edge AI Processing, and Integrated Connectivity for IoT & Machine Learning Applications](https://m.media-amazon.com/images/I/61EnUGkxn8L._AC_SL1000_.jpg)
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Game Controller for PC in 2026: 5 Picks Tested Against Real Use
- Halloween Talking Prop: Qwen3 4B on Jetson Orin Nano Super vs Raspberry Pi 5 16GB
- AMD Ryzen AI Max for Local LLMs: What the Specs Mean
- CPU Fan Angled Left on a New Prebuilt: Normal or Not?
- Shared ChatGPT & Claude Chat Malware: Why Local LLMs Cut the Risk
- Anthropic Tightens Claude Fable 5 Limits — Why Builders Are Eyeing Local Rigs
- HiDream-O1-Image Debuts as Top Open-Weights Text-to-Image Model
- KOORUI 27-inch 4K QD-Mini LED: A Budget HDR Gaming Monitor?
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- Best Budget GPU for Local 12B–14B LLM Inference: Why the RTX 3060 12GB Still Wins
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe Boot Drive
- RTX 3060 12GB vs RTX 3090 for Local LLMs (2026)
- Hy3-Preview vs DeepSeek V4 Flash: Where the New Open-Weights Model Actually Lands
- Voodoo5 5500 PCI Boots on Modern ASUS P8Z77-V Pro — A Look at Retro GPUs in 2026 Boards
- Sound BlasterX G6 for DOS and Win98 Retro Gaming: SBEMU and Real-Mode Audio
- AI coding assistants ranked — Claude Code, Cursor, GitHub Copilot, Aider
- Best Sim Racing Wheel + Shifter Combo Under $400 in 2026: 5 Setups for iRacing, ACC, and GT3
- Claude Code Artifacts Just Shipped: What It Adds, and the Local Aider Alternative
- Best PC Streaming Starter Kit in 2026: 5 Picks
- HyperX QuadCast 2 vs Blue Yeti: Best USB Mic for Streaming and Podcasting in 2026
- RetroPie Handheld 3D Print Guide: Cases, Settings & Parts
- Do you need a shifter for sim racing? Logitech G29 + Thrustmaster TH8A
- Best Game Controller for PC and Console in 2026
- Best Nintendo Switch Accessories for Handheld and Docked Play in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090