solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components
Bottom line: The solder wick braid 10ft Length Desoldering Wick Braid Remover Tool ($6.99 on Amazon as of 2026-11-20 23:15 UTC): 10ft roll on a single piece - long enough for months of bench rework; main trade-off: 0.1 inch is one fixed width - no narrow or wide options in the pack.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ 10ft roll on a single piece - long enough for months of bench rework
- ✓ No-clean formulation skips post-rework flux cleanup
- ✓ 0.1 inch width suits SMD pads and keyboard switch pads alike
- ✓ Precision copper weave boosts capillary pull on molten solder
Cons
- ✗ 0.1 inch is one fixed width - no narrow or wide options in the pack
- ✗ Needs a soldering iron; not a standalone tool like a solder sucker
- ✗ Braid wicks flux over time if the roll is left exposed on the bench
- ✗ Only one roll included, so no spare when a run gets contaminated
Manufacturer description
The Lesnow solder wick braid gives you 10 feet of no-clean desoldering braid on a single roll, 0.1 inch wide, for pulling molten solder off boards without smearing it around. The copper weave is built with a geometrically precise pattern that improves capillary action, so once you touch your iron to the braid and the joint heats, the wick draws the solder up and leaves a clean pad behind. That matters on the jobs where a solder sucker is too clumsy: correcting mistakes on small PCBs, lifting relays and through-hole components, re-soldering mechanical keyboard switches, freeing old wire from…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for solder wick braid 10ft Length Desoldering Wick Braid Remover Tool…, so this read rests on the manufacturer's listed specs and the current price in the tools & maintenance category (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "10ft roll on a single piece - long enough for months of bench rework"; the main trade-off is "0.1 inch is one fixed width - no narrow or wide options in the pack". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How long is the solder wick roll?
Each roll is about 10ft long and 0.1 inch wide, and the pack includes 1 piece.
Do I need to clean the board after using this wick?
No. This is a no-clean solder wick, so flux residue does not require a post-rework cleaning step.
Can I use it to remove mechanical keyboard switches?
Yes. Re-soldering mechanical keyboard switches is one of the listed uses, along with removing relays and other through-hole components.
Does it work on SMD components?
Yes. The 0.1 inch braid is intended for cleaning excess alloy off SMD components and correcting errors on small PCBs.
How do I use the wick correctly?
Work from the tip of the braid: lay it on the joint, heat it with your iron, and the copper weave absorbs the molten solder once both reach temperature.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 1.The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- 2.1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
- 3.This desoldering wick has geometrically-precise weave with copper, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area
- 4.The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- 5.The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
Full Specifications
| Brand | Lesnow |
|---|---|
| Style | 1pcs |
| Material | copper |
| Part Number | Lesnow-FT-01 |
| Power Source | Lesnow-FT |
| Batteries Included? | No |
| Batteries Required? | No |
| Included Components | Lesnow-FT |
| Item Package Quantity | 1 |
Ready to buy?
solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best Storage Upgrades for Retro and Budget PC Builds in 2026
- Best CPU for Streaming and Gaming on AM4 in 2026
- LM Studio on an RTX 3060 12GB: Local-LLM Setup and tok/s in 2026
- RTX 3060 vs Arc B580 for 1440p Gaming: Which 12GB Card Wins?
- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Gaming
- Is the RTX 3060 12GB Still a Good 1080p Gaming GPU in 2026?
- MSI RTX 3060 12GB in 2026: Still the Right 1080p GPU?
- 8BitDo Pro 2 vs GameSir G7 SE: Best Controller for PC Emulation in 2026
- Samsung Odyssey OLED G9 Drops $700 — and a Cheaper 4K Path
- Qwen 3.6 27B vs Mistral Medium 3.5 on a 24GB GPU: Only One Fits
- Ring Light vs LED Strips: What Actually Fixes a Grainy Webcam
- Raspberry Pi Pico W Becomes a Driverless USB WiFi Adapter
- Crucial BX500 vs Samsung 870 EVO for Budget & Retro Builds
- How Much VRAM Does 32k Context Use on an RTX 3060 12GB? (2026)
- Expanding the SNES Classic and Genesis Mini Library in 2026
- AI-Driven Sound Blaster Driver Install on WinXP via Vision LLM
- Best Gaming Headset Under $50 for Console + PC (2026)
- 1440p High-Refresh vs 4K for Gaming in 2026: ASUS TUF 27" QHD vs SANSUI/KOORUI 4K
- Best Monitor for Color Grading Under $500 in 2026
- Build a Motion-Triggered Wildlife Camera on Raspberry Pi (2026)
- Best Controller for Raspberry Pi Retro Gaming and Emulation in 2026
- Mouse Wheel Scrolling Wrong Direction? Here's the Fix
- Best Budget SSD for Gaming in 2026: 5 Tested Picks Ranked
- Best Mechanical Keyboard for Office Work & Productivity (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090