Basesailor
Basesailor USB Splitter 1 in 4 Out 1FT,USBA Male to Four Female Adapter
Bottom line: The Basesailor USB Splitter 1 in 4 Out 1FT ($9.99 on Amazon as of 2026-10-20 22:16 UTC): Double-braided nylon over aluminum housing resists bend fatigue; main trade-off: USB 2.0 only - no USB 3.0 transfer speeds.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Double-braided nylon over aluminum housing resists bend fatigue
- ✓ Driver-free - plug in and the ports work immediately
- ✓ Works with car USB ports, Xbox, PS4, PS5, and laptops
Cons
- ✗ USB 2.0 only - no USB 3.0 transfer speeds
- ✗ 5V/2A total, so each port gets about 0.5A when all four are used
- ✗ Not enough current for bus-powered external hard drives
- ✗ 1FT length keeps it close to the host port, limiting placement
SpecPicks Verdict
SpecPicks scored Basesailor USB Splitter 1 in 4 Out 1FT using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. Basesailor's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Can I use all four USB ports at the same time?
Yes. The adapter is rated 5V/2A total, so with all four sub-cables active each one receives about 0.5A. That suits keyboards, mice, controllers, and flash drives, but not devices that need more current.
Is this a USB 3.0 splitter?
No. Basesailor lists it as a USB 2.0 splitter, so transfer speeds are capped at USB 2.0 rates and shared across the four ports.
Do I need to install drivers or software?
No. There is no driver download or configuration - plug the USB-A male end into your device and the four female ports are ready to use.
Will it work with a PS5, Xbox, or my car's USB port?
Basesailor lists cars, Xbox, PS4, PS5, and laptops as supported hosts. It draws power from the host port rather than a wall adapter.
How long is the cable?
One foot. It is designed to sit close to the host port and fan out to four connectors rather than extend reach across a desk.
Key Features
- (The Catch) No product is perfect, neither is this one. The rated voltage and current is 5V and 2A for this adapter, meaning each sub-cable of this adapter gets 0.5A when they are used at the same time. For more info, refer to the detailed description down below.
- (Less Constraint, More Freedom) Need more USB-A ports because all the new gadgets are coming with fewer off them? This USB-A to four-port USB-A splitter could just be your life-saver. Add more USB-A ports to your device so that you and your talent don't have to be confined by the single-port dilemma (Notice: This is a USB 2.0 splitter).
- (Less Wearing, More Saving) Tired of your wallet constantly getting worn and becoming thinner along with the wearing of other shoddy splitters? With double-braided nylon and aluminum casing that is not sensitive to twists and bends, this cable can last longer than you can imagine.
- (Less Confusion, More Concentration) With no need to download and install extra drive, you can simply plug this splitter in your device and start using it right away. No confusing configuration, no time-consuming adjustments. It's easy to stay focused with this splitter.
- (Less Chaos, More Order) Need to simultaneously connect to your accessories like keyboard and mouse but don't want too many cables to mess up your working space? Now you can. This splitter makes it possible to connect to four devices with one single cable so that you are free from all the hassle from tangled cables.
Full Specifications
| Brand | Basesailor |
|---|---|
| Color | 1 in 4 out（Gray） |
| Finish | Aluminum,Nylon |
| Unit Count | 1 Count |
| Finish Type | Aluminum,Nylon |
| Connectivity | USB |
| Model Number | B/JP/USB/SPLITTER/4/IN/1/GY/0.3M/1P |
| Input Voltage | 5 volts |
| Nominal Power | 7.5 watts |
| Warranty Type | Limited |
| Connector Type | USB |
| Mfr Part Number | usb/splitter/cable/4port |
| Number of Items | 1 |
| Number of Ports | 4 |
| Power Plug Type | No Plug |
| Compatible Devices | Laptop |
| Warranty Description | 1 |
Ready to buy?
Basesailor USB Splitter 1 in 4 Out 1FT,USBA Male to Four Female Adapter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi Dual Monitor Setup: Driving Two 4K Displays in 2026
- Training an LLM in Swift, Part 1: Matrix Mult Speed
- Intel Nova Lake-S 22-Core vs AMD Ryzen 7 5800X: Is the Cache Chip Worth Upgrading?
- GTX 1660 VRAM: Why 8GB Doesn't Exist (Real Specs)
- Ryzen 7 5800X3D Hard to Find: DDR5 CPU Alternatives Worth It?
- GPU Benchmark Data Freshness and Source Attribution in 2026
- Raspberry Pi 5 IOMMU Driver Lands for the Mainline Linux Kernel
- Best Budget PC Upgrades for 1440p Gaming in 2026
- Best SATA SSD to Upgrade a PlayStation 4 Pro in 2026
- DeepSeek on the US Entity List: Running V4 Locally in 2026
- Voodoo 5 6000 FSAA: The Feature That Never Engaged
- Raspberry Pi 4 8GB in 2026: Still the Best Home-Lab SBC for Under $80
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget LLM + Gaming Build
- Retro Nintendo Switch 2 Dock Channels the N64 and Holds Six Game Cards
- Kimi K2.7 Code Is 12x Cheaper Than GPT-5.5 — Run It Local?
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5080
- Building a 2001 LAN Party Rig in 2026: GeForce 3, Pentium III, and Period-Correct Peripherals
- Best Streaming Gear for New Creators in 2026
- GeForce 3 Ti 500 Build Guide: Period-Correct Win98 SE Rig for 2001-Era Gaming
- BENGOO G9000 vs Turtle Beach Recon 50: Best Sub-$40 Wired Headset
- Troubleshooting 3dfx Voodoo Cards on Modern AGP Builds: The 2026 Recovery Playbook
- Best Adaptive and One-Handed Gaming Controllers in 2026
- Best Esports Club Practice Room Gear in 2026
- AOOSTAR MACO 6850H as a Proxmox 9 Home Server
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090